Datasheet.kr


BFR92A 데이터시트 PDF : 부품 기능 및 핀배열

부품번호 BFR92A
기능 SMALL SIGNAL NPN RF TRANSISTOR
제조업체 TT
로     고 TT 로고 
미리보기

( 핀배열 )


전체 4 페이지

		
BFR92A 데이터시트 및 BFR92A PDF

1페이지

BFR92A pdf, 반도체, 판매, 대치품
SMALL SIGNAL
NPN RF TRANSISTOR
BFR92, BFR92A
SCREENING OPTIONS
Space Level (JQRS/ESA) and High Reliability options are
available in accordance with the High Reliability and
Screening Options Handbook available for download from
the from the TT electronics Semelab web site.
ESA Quality Level Products are based on the testing
procedures specified in the generic ESCC 5000 and in the
corresponding part detail specifications.
Semelabs QR216 and QR217 processing specifications
(JQRS), in conjunction with the companies ISO 9001:2000
approval present a viable alternative to the American MIL-
PRF-19500 space level processing.
QR217 (Space Level Quality Conformance) is based on the
quality conformance inspection requirements of MIL-PRF-
19500 groups A (table V), B (table VIa), C (table VII) and
also ESA / ESCC 5000 (chart F4) lot validation tests.
QR216 (Space Level Screening) is based on the screening
requirements of MIL-PRF-19500 (table IV) and also ESA
/ESCC 5000 (chart F3).
JQRS parts are processed to the device data sheet and
screened to QR216 with conformance testing to Q217
groups A and B in accordance with MIL-STD-750 methods
and procedures.
Additional conformance options are available, for example
Pre-Cap Visual Inspection, Buy-Off Visit or Data Packs.
These are chargeable and must be specified at the order
stage (See Ordering Information). Minimum order
quantities may apply.
Alternative or additional customer specific conformance or
screening requirements would be considered. Contact
Semelab sales with enquires.
MARKING DETAILS
Screened parts are typically marked with specification
number, serial number (or week of seal) as shown in the
example below. All non screened parts are printed with
three characters only eg. 92A.
Customer specific marking requirements can be arranged at
time of order but is approximately limited to two lines of
7 Characters. This is to ensure text remains readable..
Example Marking:
ORDERING INFORMATION
Part number is built from part and screening level. The part
number can be extended to include the additional options
as shown below.
Type – See Electrical Stability Characteristics Table
Package Variant – See Mechanical Data
Screening Level – See Screening Options (ESA / JQRS)
Additional Options:
Customer Pre-Cap Visual Inspection
Customer Buy-Off visit
Data Pack
Solderability Samples
Scanning Electron Microscopy
Radiography (X-ray)
Total Dose Radiation Test
.CVP
.CVB
.DA
.SS
.SEM
.XRAY
.RAD
MIL-PRF-19500 (QR217)
Group B charge
Group B destructive mechanical samples
Group C charge
Group C destructive electrical samples
Group C destructive mechanical samples
.GRPB
.GBDM (12 pieces)
.GRPC
.GCDE (12 pieces)
.GCDM (6 pieces)
ESA/ESCC
Lot Validation Testing (subgroup 1) charge
LVT1 destructive samples (environmental)
LVT1 destructive samples (mechanical)
Lot Validation Testing (subgroup 2) charge
LVT2 endurance samples (electrical)
Lot Validation Testing (subgroup 3) charge
LVT3 destructive samples (mechanical)
.LVT1
.L1DE (15 pieces)
.L1DM (15 pieces)
.LVT2
.L2D (15 pieces)
.LVT3
.L3D (5 pieces)
Additional Option Notes:
1) All ‘Additional Options’ are chargeable and must be specified at order stage.
2) When Group B,C or LVT is required, additional electrical and mechanical destructive
samples must be ordered
3) All destructive samples are marked the same as other production parts unless
otherwise requested.
Example ordering information:
The following example is for the 4 pad packaged part
option with, JQRS screening, additional Group C
conformance testing and a Data pack.
Part Numbers:
BFR92AC1B-JQRS (Include quantity for flight parts)
BFR92AC1B-JQRS.GRPC (chargeable conformance option)
BFR92AC1B-JQRS.GCDE (charge for destructive parts)
BFR92AC1B-JQRS.GCDM (charge for destructive parts)
BFR92AC1B-JQRS.DA (charge for Data pack)
Customers with any specific requirements (e.g. marking,
package or screening) may be supplied with a similar
alternative part number (there is maximum 20 character
limit to part numbers). Requirements for deep dielectric
discharge variant (C1B) must be specified at time of order.
Contact Semelab sales with all enquiries
High Reliability and Screening Options Handbook link: http://www.semelab.co.uk/pdf/misc/documents/hirel_and_screening_options.pdf
Semelab Limited
Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com
Document Number 8347
Website: http://www.semelab-tt.com
Issue 1
Page 4 of 4

4페이지






구       성총 4 페이지
다운로드[ BFR92A.PDF 데이터시트 ]
구매문의
일반 IC 문의 : 샘플 및 소량 구매
-------------------------------------------------------------------------------------------

전력반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드모듈 ) : 010-3582-2743

상호 : 아이지 인터내셔날, 전화번호 : 051-319-2877, [ 홈페이지 ]



링크공유

링크 :


관련 데이터시트

부품번호상세설명 및 기능제조사
BFR92

The functions of this components is a NPN 5 GHz wideband transistor.

NXP
NXP
BFR92

The functions of this components is a Silicon NPN Planar RF Transistor.

Vishay Telefunken
Vishay Telefunken
BFR92

The functions of this components is a SMALL SIGNAL NPN RF TRANSISTOR.

TT
TT
BFR92

The functions of this components is a RF TRANSISTOR.

Motorola
Motorola
BFR92A

The functions of this components is a NPN 5 GHz wideband transistor.

NXP
NXP

추천 데이터시트

부품번호상세설명 및 기능제조사
2P4M

이 부품은 2A, 400V, P gate all diffused mold type Thyristor 입니다. The 2P4M and 2P6M are a P gate all diffused mold type Thyristor granted 2 A On-state Average Current (TC = 77°C), with rated voltages up to 600 V.

NEC
NEC
CQ1565RT

FSCQ1565RT, Green Mode Fairchild Power Switch. In general, a Quasi-Resonant Converter (QRC) shows lower EMI and higher power conversion efficiency compared to conventional hard-switched converter with a fixed switching frequency.

Fairchild
Fairchild
KF16N25D

MOSFET의 기능은 N Channel MOS Field effect transistor입니다. This planar stripe MOSFET has better characteristics, such as fast switching time, low on resistance, low gate charge and excellent avalanche characteristics. It is mainly suitable for DC/DC Converters and switching mode power supplies.( Vdss=250V, Id=13A )

KEC
KEC
FR9884

컨버터의 기능은 340KHz Synchronous Step-Down DC/DC Converter 입니다. The FR9884 is a synchronous step-down DC/DC converter that provides wide 4.5V to 18V input voltage range and 3A continuous load current capability.

Fitipower
Fitipower

www.DataSheet.kr    |   2018   |  연락처   |  링크모음   |   검색  |   사이트맵