Datasheet.kr   

HCPL-0500 PDF 데이터시트 : 부품 기능 및 핀배열

부품번호 HCPL-0500
기능 High Speed Optocouplers
제조업체 AVAGO
로고 AVAGO 로고 


전체 16 페이지

		

No Preview Available !

HCPL-0500 데이터시트, 핀배열, 회로
6N135/6, HCNW135/6
HCPL-2502/0500/0501
Single Channel, High Speed Optocouplers
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
These diode-transistor optoc­oup­lers use an insulating
layer between a LED and an integrated photodetector to
provide elec­trical ins­u­lation between input and out­put.
Separate connections for the photodiode bias and out-
put-transistor collector increase the speed up to a hun-
dred times that of a conven­tional phototransistor coupler
by reduci­ng the base-collector capacitance.
These single channel optocoupl­ers are available in
8-Pin DIP­, SO-8 and Widebody package configurations.
The 6N135, HCPL-0500, and HCNW135 are for use in TTL/
CMOS, TTL/LSTTL or wide bandwidth analog applications.
Current transfer ratio (CTR) for these devices is 7% mini-
mum at IF = 16 mA.
The 6N136, HCPL-2502, HCPL-0501, and HCNW136 are
designed for high speed TTL/TTL applications. A standard
16 mA TTL sink current through the input LED will pro-
vide enough output current for 1 TTL load and a 5.6 k
pull-up resistor. CTR for these devices is 19% minimum at
IF = 16 mA.
Functional Diagram
NC 1
ANODE 2
CATHODE 3
NC 4
8 VCC
7 VB
6 VO
5 GND
TRUTH TABLE
(POSITIVE LOGIC)
LED VO
ON LOW
OFF HIGH
Features
High speed: 1 Mb/s
TTL compatible
Available in 8-Pin DIP, SO-8, widebody packages
Open collector output
Safety approval
UL
for
Recognized – 3750
1 minute for HCNW
Varnmds fOorp1tiomnin0u2t0ed(5e0v0ic0eVs)rms
per UL1577
CSA Approved
IEC/EN/DIN EN 60747-5-5 Approved
–––deVVVvIIIOOOiRRRcMMMes===
567 V peak for SO-8 devices
630 V peak for DIP 300 mil devices
1414 V peak for DIP 400 mil (widebody)
Dual channel version available (253X/053X/0534)
Applications
High voltage insulation
Video signal isolation
Line receivers
Feedback element in switched mode power supplies
High speed logic ground isolation
– TTL/TTL, TTL/CMOS, TTL/LSTTL
Replaces pulse transformers
Replaces slow phototransistor isolators
Analog signal ground isolation
A 0.1 µF bypass capacitor must be connected between pins 5 and 8.
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.




HCPL-0500 pdf, 반도체, 판매, 대치품
Package Outline Drawings
8-Pin DIP Package (6N135/6, HCPL-2502)
9.65 ± 0.25
(0.380 ± 0.010)
TYPE NUMBER
87
65
OPTION CODE*
A XXXXZ
DATE CODE
YYWW RU
EEE
UL RECOGNITION
1 2 3 4 LOT ID
1.19 (0.047) MAX.
1.78 (0.070) MAX.
3.56 ± 0.13
(0.140 ± 0.005)
4.70 (0.185) MAX.
7.62 ± 0.25
(0.300 ± 0.010)
6.35 ± 0.25
(0.250 ± 0.010)
5 ° TYP.
0.254
+ 0.076
- 0.051
(0.010
+ 0.003)
- 0.002)
1.080 ± 0.320
(0.043 ± 0.013)
0.51 (0.020) MIN.
2.92 (0.115) MIN.
0.65 (0.025) MAX.
2.54 ± 0.25
(0.100 ± 0.010)
DIMENSIONS IN MILLIMETERS AND (INCHES).
*MARKING CODE LETTER FOR OPTION NUMBERS
"L" = OPTION 020
"V" = OPTION 060
OPTION NUMBERS 300 AND 500 NOT MARKED.
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
8-Pin DIP Package with Gull Wing Surface Mount Option 300 (6N135/6)
LAND PATTERN RECOMMENDATION
9.65 ± 0.25
(0.380 ± 0.010)
1.016 (0.040)
87
65
6.350 ± 0.25
(0.250 ± 0.010)
10.9 (0.430)
12
34
1.19
(0.047)
MAX.
1.780
(0.070)
MAX.
3.56 ± 0.13
(0.140 ± 0.005)
1.27 (0.050)
9.65 ± 0.25
(0.380 ± 0.010)
7.62 ± 0.25
(0.300 ± 0.010)
2.0 (0.080)
0.254
+ 0.076
- 0.051
(0.010
+ 0.003)
- 0.002)
1.080 ± 0.320
(0.043 ± 0.013)
2.54
(0.100)
BSC
DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARITY = 0.10 mm (0.004 INCHES).
0.635 ± 0.130
(0.025 ± 0.005)
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
4
0.635 ± 0.25
(0.025 ± 0.010)
12 ° NOM.

4페이지










HCPL-0500 전자부품, 판매, 대치품
Insulation and Safety Related Specifications
Parameter
Minimum External
Air Gap (External
Clearance)
Minimum External
Tracking (External
Creepage)
Minimum Internal
Plastic Gap
(Internal Clearance)
Symbol
L(101)
L(102)
8-Pin DIP
(300 Mil)
Value
7.1
7.4
0.08
Minimum Internal
Tracking (Internal
Creepage)
Tracking Resistance
(Comparative
Tracking Index)
Isolation Group
CTI
NA
200
IIIa
SO-8
Value
4.9
4.8
0.08
NA
200
IIIa
Widebody
(400 Mil)
Value
9.6
Units
mm
10.0 mm
1.0 mm
4.0 mm
200 Volts
IIIa
Option 300 - surface mount classification is Class A in accordance with CECC 00802.
Conditions
Measured from input terminals to
output terminals, shortest distance
through air.
Measured from input terminals to out-
put terminals, shortest distance path
along body.
Through insulation distance, conductor
to conductor, usually the direct distance
between the photoemitter and photo-
detector inside the optocoupler cavity.
Measured from input terminals to out-
put terminals, along internal cavity.
DIN IEC 112/VDE 0303 Part 1
Material Group
(DIN VDE 0110, 1/89, Table 1)
7

7페이지



구       성총 16 페이지
다운로드[ HCPL-0500.PDF 데이터시트 ]
구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

휴대전화 : 010-3582-2743


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877, [ 홈페이지 ]



링크공유

링크 :

관련 데이터시트

부품번호상세설명 및 기능제조사
HCPL-0500

SINGLE CHANNEL HIGH SPEED TRANSISTOR OPTOCOUPLERS

Fairchild Semiconductor
Fairchild Semiconductor
HCPL-0500

Single Channel/ High Speed Optocouplers

Agilent(Hewlett-Packard)
Agilent(Hewlett-Packard)

DataSheet.kr    |   2019   |  연락처   |  링크모음   |   검색  |   사이트맵