|
|
PDF SKY13345-368LF Data sheet ( Hoja de datos )
| Número de pieza | SKY13345-368LF | |
| Descripción | SP3T Switch | |
| Fabricantes | Skyworks Solutions | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SKY13345-368LF (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
DATA SHEET
SKY13345-368LF: 0.1 to 3.5 GHz SP3T Switch
Applications
802.11 b/g WLANs
Bluetooth®
J3 V3
Features
Broadband frequency range: 0.1 to 3.5 GHz
Low insertion loss: 0.5 dB @ 2.45 GHz
High isolation: 32 dB up to 2.45 GHz
No external DC blocking capacitors required
Positive low voltage control: VCTL = 1.6 to 3.3 V,
VDD = 2.5 to 5.5 V
Small, QFN (12-pin, 2 x 2 mm) package
(MSL1, 260 C per JEDEC J-STD-020)
Skyworks Green™ products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of Green™, document number
SQ04-0074.
12 11 10
J1 1
9 J2
GND 2
8 GND
RFC J2
V2
V1 J1
ts738
Figure 1. SKY13345-368LF Block Diagram
Description
The SKY13345-368LF is a CMOS silicon-on-insulation (SOI),
single-pole, triple-throw (SP3T) switch. The high linearity
performance and low insertion loss makes the device an ideal
choice for WLAN (802.11 b/g) and Bluetooth® applications in the
2.4 to 2.5 GHz frequency range.
The SKY13345-368LF SP3T switch is provided in a compact Quad
Flat No-Lead (QFN) 2 x 2 mm package. A functional block
diagram is shown in Figure 1. The pin configuration and package
are shown in Figure 2. Signal pin assignments and functional pin
descriptions are provided in Table 1.
J3 3
7 VDD
45 6
S1812
Figure 2. SKY13345-368LF Pinout – 12-Pin QFN
(Top View)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
201194E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 15, 2015
1
1 page  
DATA SHEET • SKY13345-368LF: 0.1 TO 3.5 GHz SP3T SWITCH
Table 3. SKY13345-368LF Electrical Specifications (2 of 2) (Note 1)
(VDD = 2.5 V to 5.5 V, VCTL = 0 V (Low), VCTL = 1.8 V (High), TOP = +25 C, PIN = 0 dBm, Characteristic Impedance [ZO] = 50 Ω, Unless
Otherwise Noted)
Parameter
Symbol
Test Condition
Min Typical Max
Units
DC Specifications
Control voltage:
High
Low
VCTL_HIGH
VCTL_LOW
1.6 3.3
0 1.8 0.4
V
V
Supply voltage
VDD
2.5 5.5 V
Supply current
IDD VDD = 3.5 V
30 μA
Control current
Ictl V1 = V2 = V3 = 1.8 V
2
μA
Shutdown mode supply current
Ioff VDD = 3.5 V,
V1 = V2 = V3 = 0 V
5 μA
Note 1: Performance is guaranteed only under the conditions listed in this table.
Note 2: Dwell time refers to the amount of time the switch is required to stay in any one state before switching to another state. Refer to the Functional Description section for more
information.
Note 3: Startup time refers to the amount of time it takes for the switch to be fully operational when coming out of shutdown mode (V1 = V2 = V3 = logic 0).
Table 4. SKY13345-368LF Truth Table
V1
(Pin 4)
V2
(Pin 5)
00
10
01
00
01
Note: 1 = 1.6 to 3.3 V
0 = 0 to 0.4 V
Any state other than described in this table places the switch into an undefined state.
V3
(Pin 6)
0
0
0
1
1
State
Shutdown
RFC to J1
RFC to J2
RFC to J3
RFC to J2 and J3
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
201194E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 15, 2015
5
5 Page 
Ordering Information
Model Name
SKY13345-368LF SP3T Switch
DATA SHEET • SKY13345-368LF: 0.1 TO 3.5 GHz SP3T SWITCH
Manufacturing Part Number
SKY13345-368LF
Evaluation Board Part Number
SKY13345-368LF-EVB
Copyright © 2009, 2010, 2011-2015 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions
of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for
identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by
reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
201194E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 15, 2015
11
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet SKY13345-368LF.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SKY13345-368LF | SP3T Switch | Skyworks Solutions |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |