|
|
PDF VG1921wm-2 Data sheet ( Hoja de datos )
| Número de pieza | VG1921wm-2 | |
| Descripción | Color TFT LCD Display Service Manual | |
| Fabricantes | ViewSonic | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de VG1921wm-2 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
Service Manual
ViewSonic VG1921wm-2
Model No. VS11354
19” Color TFT LCD Display
(VG1921wm-2_SM Rev. 1a Sep. 2006)
ViewSonic 381 Brea Canyon Road, Walnut, California 91789 USA - (800) 888-8583
1 page  
4. Handling and Placing Methods
ViewSonic Corporation
Confidential - Do Not Copy
VG1921wm-2
2
5 Page 
Signal + [2] + [ ] + Main Power Factory Mode
On
Remark : All the short cuts function are only available while OSD off
Main Menu Controls
The Main Menu OSD includes most of control functions.
Please refer to APPENDIX C (Main Menu OSD Table) for the detail.
Function descriptions
OSD Lock short cuts function for the buttons
The OSD lock will be activated by pressing the front panel control buttons "(1), & (▲)" for 10 seconds. If
the user then tries to access the OSD by pressing any of the buttons "1", "▼", "▲", "2" a message will
appear on the screen for 3 seconds showing "OSD Locked". The OSD lock will be deactivated by
pressing the front panel control buttons "(1), & (▲)" again for 10 seconds.
Note1: When the OSD is locked will lock all functions, including “Volume” and “Mute”
Note 2: Status bar indicating OSD Lock or Unlock is in progress and when complete it will indicate “OSD
Locked”
Note 3: OSD Lock should not lock Power Button and Power Lock function
Power Lock short cuts function for the buttons
The power button lock will be activated by pressing the front panel control buttons "(1), & (▼)" for 10
seconds. Locking the power button means that the user won't be able to turn off the LCD while the power
button is locked. If the user presses the power button while it is locked, a message will appear on the
screen for 3 seconds showing "Power Button Locked". It also means that with the power button locked,
the LCD would automatically turn back "On" when power is restored after a power failure. If the power
button is not in the locked mode, then power should return to it's previous state when power is restored
after a power failure. The power button lock will be deactivated by pressing the front panel control buttons
"(1), & (▼)" again for 10 seconds.
Note 1: Status bar indicating Power Button lock or unlock is in progress and when complete it will
indicate “Power Button Locked”
Note 2: Power should only be lockable in the “On State”
Memory Recall Actions
Memory Recall action on the analog and digital mode as below
1. Recall white balance to factory setting
2. Set the factory defaults as shown in Section 4-8
3. Clean all the mode setting buffer
4. Execute Auto Image Adjust
Note: Memory Recall should have no effect for Language, Power Lock, User Color Settings or Input
Priority
Resolution Notice Actions
1. Resolution Notice OSD should show on screen after changing to non-native mode for 30 sec
2. For auto input select function, it shall meet the requirement in Appendix D.
3. The OSD should disappear after 10 sec or by pushing button [1] or [2]
Resolution Notice function should be disabled when push button [2] under Resolution Notice OSD
0-Touch™ Function Actions
1. Execute Auto Image Adjust when new mode detected, and save the settings to buffer for further use
2. It should be reset by Memory Recall function(Should not reset by power off, power unplug and others)
OSD Auto Save
The OSD shall save new settings when it is turned off by the user or when it times out. There shall not
be a separate save
ViewSonic Corporation
Confidential - Do Not Copy
VG1921wm-2
8
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet VG1921wm-2.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| VG1921wm-2 | Color TFT LCD Display Service Manual | ViewSonic |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |