|
|
|
부품번호 | XFL4030-471ME 기능 |
|
|
기능 | Shielded Power Inductors | ||
제조업체 | Coilcraft | ||
로고 | |||
전체 2 페이지수
Document 1048-1
Shielded Power Inductors – XFL4030
• High current – up to 5.2 A
• Very low DCR – as low as 3.6 mOhms
Core material Composite
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver over copper. Other
terminations available at additional cost.
Weight 0.25 – 0.27 g
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C (ambient + temp rise).
Storage temperature Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 500/7″ reel; 2000/13″ reel Plastic tape: 12 mm wide,
0.23 mm thick, 8 mm pocket spacing, 3.25 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other
solvents, see Doc787_PCB_Washing.pdf
Inductance2
Part number1
±20% (µH)
XFL4030-471ME_ 0.47
XFL4030-102ME_ 1.0
XFL4030-202ME_ 2.0
XFL4030-302ME_ 3.0
XFL4030-472ME_ 4.7
DCR (mOhms)3
typ max
SRF typ4
(MHz)
Isat (A)5
10% drop 20% drop 30% drop
Irms (A)6
20°C rise 40°C rise
3.6 4.4 110
5.5 6.6 67
9.5 11.5 46
17.0 20.5 39
25.0 30.0 34
4.5 4.9
3.6 3.9
2.5 2.8
1.8 2.1
1.7 2.0
5.2
4.1
3.0
2.2
2.1
14.0 18.0
11.0 14.5
7.80 11.8
6.10 8.00
5.70 7.50
1. When ordering, please specify packaging code:
XFL4030-472MEC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (500 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added
($25 charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked
(2000 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes the specified inductance drop from its value without current.
6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only
and does not represent absolute maximum ratings.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
Temperature rise is highly
dependent on many factors
including pcb land pattern,
trace size, and proximity to
other components. Therefore
temperature rise should be
verified in application conditions.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 1048-1 Revised 02/15/16
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
| |||
구 성 | 총 2 페이지수 | ||
다운로드 | [ XFL4030-471ME.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
XFL4030-471ME | Shielded Power Inductors | Coilcraft |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |