|
|
|
부품번호 | XFL4012-121ME 기능 |
|
|
기능 | Shielded Power Inductors | ||
제조업체 | Coilcraft | ||
로고 | |||
전체 2 페이지수
Document 935-1
Shielded Power Inductors – XFL4012
• High current ratings and low DCR
• Very low profile, only 1.2 mm high
Designer’s Kit C455 contains 5 of each XFL4012 and XFL4015 value.
Core material Composite
Weight 85 – 95 mg
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver (96.5/3.5) over copper.
Other terminations available at additional cost.
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1500/7″ reel; 5000/13″ reel Plastic tape: 12 mm wide,
0.23 mm thick, 8 mm pocket spacing, 1.40 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Inductance2
Part number1
±20% (µH)
DCR (mOhms)3
typ max
SRF typ4
Isat (A)5 Irms (A)6
(MHz) 10% drop 20% drop 30% drop 20°C rise 40°C rise
XFL4012-121ME_ 0.12
5.20 5.88 220
6.9 9.8 11.3
9.60 13.20
XFL4012-251ME_ 0.25
7.64 8.40 150
4.4 7.7 9.7
8.15 11.45
XFL4012-471ME_ 0.47
14.07 15.48
115
3.2 5.5 6.7
6.25 8.70
XFL4012-601ME_ 0.60 17.40 19.14 95.0 2.8 5.0 6.5 5.45 7.65
1. When ordering, please specify termination and packaging codes:
XFL4012-601MEC
Termination: E = RoHS compliant tin-silver over copper.
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (1500 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added
($25 charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked
(5000 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
value without current. Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only
and does not represent absolute maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
Temperature rise is highly
dependent on many factors
including pcb land pattern, trace
size, and proximity to other com-
ponents. Therefore temperature
rise should be verified in appli-
cation conditions.
Document 935-1 Revised 09/01/15
| |||
구 성 | 총 2 페이지수 | ||
다운로드 | [ XFL4012-121ME.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
XFL4012-121ME | Shielded Power Inductors | Coilcraft |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |