|
|
PDF LOC211P Data sheet ( Hoja de datos )
| Número de pieza | LOC211P | |
| Descripción | Dual Linear Optocouplers | |
| Fabricantes | IXYS | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LOC211P (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
INTEGRATED CIRCUITS DIVISION
Parameter
LED Operating Range
K3, Transfer Gain
Isolation, Input to Output
Rating
2-10
0.773-1.072
3750
Units
mA
-
Vrms
Features
• 0.01% Servo Linearity
• THD -87dB Typical
• Wide Bandwidth (>200kHz)
• Couples Analog and Digital Signals
• High Gain Stability
• Low Input/Output Capacitance
• Low Power Consumption
• 16-Pin SOIC Package (PCMCIA Compatible)
• Machine Insertable, Wave Solderable
• Surface Mount Tape & Reel Version Available
Applications
• Modem Transformer Replacement With No
Insertion Loss
• Digital Telephone Isolation
• Power Supply Feedback Voltage/Current
• Medical Sensor Isolation
• Audio Signal Interfacing
• Isolation of Process Control Transducers
Pin Configuration
1
– LED
2
+ LED
3
C1
Optocoupler #1
4
A1
5
Optocoupler #2 NC
6
NC
7
C2
8
A2
16
NC
15
NC
14
C2
13
A2
12
– LED
11
+ LED
10
C1
9
A1
LOC211P
Dual Linear Optocouplers
Description
The LOC211P Dual Linear Optocoupler features an
infrared LED optically coupled with two photodiodes.
A feedback (input) photodiode is used to generate a
control signal that provides a servomechanism to the
LED drive current, thus compensating for the LED's
nonlinear time and temperature characteristics. The
other (output) photodiode provides an output signal
that is linear with respect to the servo LED current.
The product features wide bandwidth, high input to
output isolation, and excellent servo linearity.
Approvals
• UL Recognized Component: File # E76270
• CSA Certified Component: Certificate # 1175739
• EN/IEC 60950-1 Certified Component:
TUV Certificate # B 13 12 82667 003
Ordering Information
Part #
LOC211P
LOC211PTR
Description
16-Pin SOIC (50/tube)
16-Pin SOIC (1000/Reel)
K3 Sorted Bins
Bin K3 Range
Bin 1
0.773 - 0.886
Bin 2
0.887 - 1.072
Bin Matrix
Top Pole
Bottom Pole
Optocoupler* Optocoupler**
Suffix
Bin
K1
1
L1
2
M2
1
N2
2
*Top Optocoupler: Pins 1,2,3,4,13, and 14
**Bottom Optocoupler: Pins 7 through 12
Part Number Information
The LOC211P is shipped in anti-static tubes (50
pieces each) or tape/reel (1,000 pieces each). Each
container has only 1 bin combination which will be
branded on each part with the appropriate bin letter
K, L, M, or N in the lower right hand corner. Suffix
representation is described in the “Bin Matrix”.
DS-LOC211P-R07
www.ixysic.com
1
1 page  
INTEGRATED CIRCUITS DIVISION
LOC211P
LOC211P
PIN 16
PIN 1
Mechanical Dimensions
10.160±0.381
(0.400±0.015)
10.363±0.127
(0.408±0.005)
7.493±0.127
(0.295±0.005)
0.635 X 45°
(0.025 X 45°)
0.254 ±0.0127
(0.010±0.0005)
PCB Land Pattern
1.016 TYP
(0.040 TYP)
1.90
(0.075)
9.30
(0.366)
1.270 TYP
(0.050 TYP)
2.057±0.051
(0.081±0.002)
0.406 TYP
(0.016 TYP)
8.890 TYP
(0.350 TYP)
0.508±0.1016
(0.020±0.004)
Lead to Package Standoff:
MIN: 0.0254 (0.001)
MAX: 0.102 (0.004)
1.27
(0.050)
0.60
(0.024)
DIMENSIONS
mm
(inches)
NOTES:
1. Coplanarity = 0.1016 (0.004) max.
2. Leadframe thickness does not include solder plating
(1000 microinch maximum).
LOC211PTR Tape & Reel
330.2 DIA.
(13.00 DIA.)
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
Embossed Carrier
Embossment
B0=10.70
(0.421)
K0=3.20
(0.126)
K1=2.70
(0.106)
A0=10.90
(0.429)
P=12.00
(0.472)
NOTES:
1. All dimensions carry tolerances of EIA Standard 481-2
2. The tape complies with all “Notes” for constant dimensions
listed on page 5 of EIA-481-2
W=16
(0.630)
Dimensions
mm
(inches)
For additional information please visit our website at: www.ixysic.com
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to
its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-LOC211P-R07
©Copyright 2015, IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
5 6/5/2015
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet LOC211P.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LOC211 | Linear Optocouplers |  Clare Inc. |
| LOC211P | Linear Optocouplers | Clare Inc. |
| LOC211P | Dual Linear Optocouplers | IXYS |
| LOC211PTR | Linear Optocouplers | Clare Inc. |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |