Datasheet.kr   

6RA7087-2FS22-0 PDF 데이터시트 : 부품 기능 및 핀배열

부품번호 6RA7087-2FS22-0
기능 dc drives Instruction Manual
제조업체 Siemens
로고 Siemens 로고 


전체 30 페이지

		

No Preview Available !

6RA7087-2FS22-0 데이터시트, 핀배열, 회로
6RA70 Series Base Drive Instruction Manual
Microprocessor-based converters from 15A -1680A
for variable speed DC drives
Rev 7.0
dc drives




6RA7087-2FS22-0 pdf, 반도체, 판매, 대치품
10.24 Motorized potentiometer
10.25 Oscillation
10.26 dDeeffiinniittioionnooffMMoottoorrIInntfeerrfafaccee
10.27 Torque Shell Input
10.28 Speed limiting controller
10.29 Friction compensation
10.30 Compensation of moment of inertia(dv/dt injection)
10.31 Speed controller
10.32 Field reversal
10.33 Input Quantities for Signals
10.34 Configuring of Closed-Loop Control
10.35 Control and Status Word
10.36 Further Configuring Measures
10.37 Analog Inputs
10.38 Analog Outputs
10.39 Binary Outputs
10.40 Configuration of Serial Interfaces
10.41 Deactivation of Monitoring Functions
10.42 Compensation values
10.43 Thyristor Diagnostics
10.44 Parameters for DriveMonitor and OP1S
10.45 Profile Parameters
10.46 Fault memory
10.47 Visualization parameters: Alarms
10.48 Device identification
10.49 Visualization parameters: Control and status word
10.50 Resetting and Storing Parameters
11 Simplified Block Diagrams
10-49
10-51
10-52
10-53
10-54
10-54
10-55
10-57
10-59
10-59
10-60
10-68
10-71
10-72
10-76
10-78
10-79
10-89
10-89
10-90
10-90
10-90
10-91
10-92
10-93
10-93
10-93
11-1
Siemens Energy & Automation
SIMOREG DC Master Base Drive Panel Operating Instructions
0-3

4페이지










6RA7087-2FS22-0 전자부품, 판매, 대치품
NOTE
These operating instructions do not purport to cover all details or variations in equipment, nor to
provide for every possible contingency to be met in connection with installation, operation or
maintenance.
Should further information be desired or should particular problems arise which are not covered
sufficiently for the purchaser's purposes, the matter should be referred to the local Siemens
Sales Office.
The contents of these operating instructions shall not become part or modify any prior or existing
agreement, commitment or relationship. The Sales Contract contains the entire obligations of
Siemens. The warranty contained in the contract between the parties is the sole warranty of
Siemens. Any statements contained herein do not create new warranties or modify the existing
warranty.
DANGER
Converters contain hazardous electrical voltages, Death, severe bodily injury or significant
material damage can occur if the safety measures are not followed.
1. Only qualified personnel, who are knowledgeable about the converters and the provided
information, can install, start up, operate, troubleshoot or repair the converters.
2. The converters must be installed in accordance with all relevant safety regulations (e.g.
NEC, DIN, VDE) as well as all other national or local regulations. Operational safety and
reliability must be ensured by correct grounding, cable sizing and appropriate short-circuit
protection.
3. All panels and doors must be kept closed during normal operation.
4. Before carrying out visual checks and maintenance work, ensure that the AC power supply
is disconnected and locked out. Before the AC supply is disconnected, both converters and
motors have hazardous voltage levels. Even when the converter contactor is open,
hazardous voltages are still present.
5. When making measurements with the power supply switched on, electrical connections
must not be touched under any circumstances. Remove all jewelry from wrists and fingers.
Ensure that the test equipment is in good conditions and operationally safe.
6. When working on units that are switched on, stand on an insulating surface, i.e. ensure that
you are not grounded.
7. Carefully follow the relevant instructions and observe all danger, warning and cautionary
instructions.
8. This does not represent a full listing of all the measures necessary for safe operation of the
equipment. If you require other information or if certain problems occur which are not
handled in enough detail in the information provided in the Instruction Manual, please
contact your local Siemens office.
1-2
Siemens Energy & Automation
SIMOREG DC Master Base Drive Panel Operating Instructions

7페이지



구       성총 30 페이지
다운로드[ 6RA7087-2FS22-0.PDF 데이터시트 ]
구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

휴대전화 : 010-3582-2743


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877, [ 홈페이지 ]



링크공유

링크 :

관련 데이터시트

부품번호상세설명 및 기능제조사
6RA7087-2FS22-0

dc drives Instruction Manual

Siemens
Siemens

DataSheet.kr    |   2019   |  연락처   |  링크모음   |   검색  |   사이트맵