Datasheet.kr   

AR0130CS PDF 데이터시트 : 부품 기능 및 핀배열

부품번호 AR0130CS
기능 1/3-Inch CMOS Digital Image Sensor
제조업체 ON Semiconductor
로고 ON Semiconductor 로고 


전체 30 페이지

		

No Preview Available !

AR0130CS 데이터시트, 핀배열, 회로
AR0130CS: 1/3-Inch CMOS Digital Image Sensor
Features
1/3-Inch CMOS Digital Image Sensor
AR0130CS Datasheet, Rev. 12
For the latest datasheet, please visit www.onsemi.com
Features
• Superior low-light performance both in VGA mode
and HD mode
• Excellent Near IR performance
• HD video (720p60)
• On-chip AE and statistics engine
• Auto black level calibration
• Context switching
• Progressive Scan
• Supports 2:1 scaling
• Internal master clock generated by on-chip phase
locked loop (PLL) oscillator.
• Parallel output
Applications
• Gaming systems
• Video surveillance
• 720p60 video applications
General Description
ON Semiconductor's AR0130 is a 1/3-inch CMOS digi-
tal image sensor with an active-pixel array of 1280H x
960V. It captures images with a rolling-shutter readout.
It includes sophisticated camera functions such as
auto exposure control, windowing, and both video and
single frame modes. It is programmable through a sim-
ple two-wire serial interface. The AR0130 produces
extraordinarily clear, sharp digital pictures, and its
ability to capture both continuous video and single
frames makes it the perfect choice for a wide range of
applications, including gaming systems, surveillance,
and HD video.
Table 1:
Key Parameters
Parameter
Optical format
Active pixels
Pixel size
Color filter array
Shutter type
Input clock range
Output clock maximum
Output Parallel
1.2 Mp (full FOV)
Max.
Frame
rates
720pHD (reduced FOV)
VGA (full FOV)
VGA (reduced FOV)
800 x 800 (reduced
FOV)
Responsivity at 550 nm (Mono)
Responsivity at 550 nm (RGB
green)
SNRMAX
Dynamic range
Supply
voltage
I/O
Digital
Analog
Power consumption
Operating temperature
Package option
Typical Value
1/3-inch (6 mm)
1280 x 960 = 1.2 Mp
3.75 m
Monochrome, RGB Bayer
Electronic rolling shutter
6 – 50 MHz
74.25 MHz
12-bit
45 fps
60 fps
45 fps
60 fps
60 fps
6.5 V/lux-sec
5.6 V/lux-sec
44 dB
82 dB
1.8 or 2.8 V
1.8 V
2.8 V
270 mW (1280x720 60
fps)
–30°C to + 70°C (ambient)
–30°C to + 80°C (junction)
Bare die, iLCC, PLCC
AR0130CS/D Rev. 12, 1/16 EN
1 ©Semiconductor Components Industries, LLC 2016.




AR0130CS pdf, 반도체, 판매, 대치품
AR0130CS: 1/3-Inch CMOS Digital Image Sensor
General Description
General Description
The ON Semiconductor AR0130 can be operated in its default mode or programmed for
frame size, exposure, gain, and other parameters. The default mode output is a 960p-
resolution image at 45 frames per second (fps). It outputs 12-bit raw data over the
parallel port. The device may be operated in video (master) mode or in single frame
trigger mode.
FRAME_VALID and LINE_VALID signals are output on dedicated pins, along with a
synchronized pixel clock in parallel mode.
The AR0130 includes additional features to allow application-specific tuning:
windowing and offset, adjustable auto-exposure control, and auto black level correction.
Optional register information and histogram statistic information can be embedded in
first and last 2 lines of the image frame.
Functional Overview
The AR0130 is a progressive-scan sensor that generates a stream of pixel data at a
constant frame rate. It uses an on-chip, phase-locked loop (PLL) that can be optionally
enabled to generate all internal clocks from a single master input clock running between
6 and 50 MHz The maximum output pixel rate is 74.25 Mp/s, corresponding to a clock
rate of 74.25 MHz. Figure 1 shows a block diagram of the sensor.
Figure 1: Block Diagram
Power
Active Pixel Sensor
(APS)
Array
OTPM
Memory
PLL
External
Clock
Timing and Control
(Sequencer)
Auto Exposure
and Stats Engine
Trigger
Analog Processing and
A/D Conversion
Pixel Data Path
(Signal Processing)
Parallel
Output
Two-Wire
Serial
Interface
Control Registers
User interaction with the sensor is through the two-wire serial bus, which communi-
cates with the array control, analog signal chain, and digital signal chain. The core of the
sensor is a 1.2 Mp Active- Pixel Sensor array. The timing and control circuitry sequences
through the rows of the array, resetting and then reading each row in turn. In the time
interval between resetting a row and reading that row, the pixels in the row integrate
incident light. The exposure is controlled by varying the time interval between reset and
readout. Once a row has been read, the data from the columns is sequenced through an
analog signal chain (providing offset correction and gain), and then through an analog-
to-digital converter (ADC). The output from the ADC is a 12-bit value for each pixel in
the array. The ADC output passes through a digital processing signal chain (which
AR0130CS/D Rev. 12, 1/16 EN
4 ©Semiconductor Components Industries, LLC, 2016.

4페이지










AR0130CS 전자부품, 판매, 대치품
Figure 3: 48-Pin iLCC Pinout Diagram
AR0130CS: 1/3-Inch CMOS Digital Image Sensor
Functional Overview
DOUT7
DOUT8
DOUT9
DOUT10
DOUT11
VDD_IO
PIXCLK
VDD
SCLK
SDATA
RESET_BAR
VDD_IO
6 5 4 3 2 1 48 47 46 45 44 43
7 42
8 41
9 40
10 39
11 38
12 37
13 36
14 35
15 34
16 33
17 32
18 31
19 20 21 22 23 24 25 26 27 28 29 30
NC
NC
VAA
AGND
VAA_PIX
VAA_PIX
VAA
AGND
VAA
NC
NC
NC
AR0130CS/D Rev. 12, 1/16 EN
7 ©Semiconductor Components Industries, LLC, 2016.

7페이지



구       성총 30 페이지
다운로드[ AR0130CS.PDF 데이터시트 ]
구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

휴대전화 : 010-3582-2743


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877, [ 홈페이지 ]



링크공유

링크 :

관련 데이터시트

부품번호상세설명 및 기능제조사
AR0130CS

1/3-Inch CMOS Digital Image Sensor

ON Semiconductor
ON Semiconductor

DataSheet.kr    |   2019   |  연락처   |  링크모음   |   검색  |   사이트맵