Datasheet.kr   

908E624 PDF 데이터시트 : 부품 기능 및 핀배열

부품번호 908E624
기능 Integrated Triple High Side Switch
제조업체 Freescale Semiconductor
로고 Freescale Semiconductor 로고 



전체 30 페이지

		

No Preview Available !

908E624 데이터시트, 핀배열, 회로
Freescale Semiconductor
Technical Data
Document Number: MM908E624
Rev. 11.0, 4/2012
Integrated Triple High Side
Switch with Embedded MCU
and LIN Serial Communication
for Relay Drivers
The 908E624 is an integrated single-package solution that
includes a high performance HC08 microcontroller with a
SMARTMOS analog control IC. The HC08 includes flash memory, a
timer, enhanced serial communications interface (ESCI), an analog-
to-digital converter (ADC), internal serial peripheral interface (SPI),
and an internal clock generator module. The analog control die
provides three high side outputs with diagnostic functions, voltage
regulator, watchdog, current sense operational amplifier, and local
interconnect network (LIN) physical layer.
The single package solution, together with LIN, provides optimal
application performance adjustments and space saving PCB design.
It is well-suited for the control of automotive high current motors
applications using relays (e.g., window lifts, fans, and sun roofs).
Features
• High performance M68HC908EY16 core
• 16 KB of on-chip flash memory, 512 B of RAM
• Internal clock generator module
• Two 16-bit, two-channel timers
• 10-bit ADC
• LIN physical layer interface
• Low dropout voltage regulator
• Three high side outputs
• Two wake-up inputs
• 16 microcontroller I/Os
908E624
908E624
HIGH SIDE SWITCH
EW (Pb-FREE) SUFFIX
98ASA99294D
54-pin SOICW
ORDERING INFORMATION
Device
(Add an R2 suffix for Tape
and reel orders)
Temperature
Range (TA)
Package
MM908E624ACPEW
MM908E624AYPEW
-40°C to 85°C
-40°C to 125°C
54 SOICW
LIN Interface
5.0 V
Microcontroller
Ports
LIN
VREFH
VDDA
EVDD
VCC
VDD
VREFL
VSSA
EVSS
AGND
GND
VSP1
RXD
PTE1/RXD
RST
RST_A
IRQ
IRQ_A
PTD0/TACH0
PW/MIN
PTA0-4
PTB1;3-7
PTC2-4
PTD1/TACH1
VSP
HS3
L1
L2
HS1
HS2
+E
WDCONF
OUT
-E
VBAT
M
To Microcontroller A/D Channel
Figure 1. 908E624 Simplified Application Diagram
*This document contains certain information on a product under development.
Freescale reserves the right to change or discontinue this product without notice.
© Freescale Semiconductor, Inc., 2012. All rights reserved.




908E624 pdf, 반도체, 판매, 대치품
PIN CONNECTIONS
Table 1. Pin Definitions (continued)
A functional description of each pin can be found in the Functional Pin Description section beginning on page 16.
Die Pin
Pin Name
Formal Name
Definition
MCU
MCU
MCU
MCU
MCU
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
43
48
44
47
45
46
49
50
52
53
54
51
17
18
19
23
24
25
26
27
31
28
29
30
34
33
35
36
37
38
39
Analog
40
VREFL
VREFH
VSSA
VDDA
EVSS
EVDD
PTA4/KBD4
PTA3/KBD3
PTA2/KBD2
PTA1/KBD1
PTA0/KBD0
FLSVPP
PWMIN
RST_A
IRQ_A
L1
L2
HS3
HS2
HS1
VSUP1
VSUP2
LIN
GND
AGND
VDD
VCC
OUT
-E
+E
WDCONF
RXD
ADC References
ADC Supply Pins
These pins are the reference voltage pins for the analog-to-digital
converter (ADC).
These pins are the power supply pins for the analog-to-digital converter.
MCU Power Supply
Pins
Port A I/Os
These pins are the ground and power supply pins, respectively. The
MCU operates from a single power supply.
These pins are special function, bidirectional I/O port pins that are
shared with other functional modules in the MCU.
Test Pin
For test purposes only. Do not connect in the application.
Direct High Side
Control Input
This pin allows the enabling and PWM control of the high side HS1 and
HS2 pins.
Internal Reset Output This pin is the reset output pin of the analog die.
Internal Interrupt
Output
This pin is the interrupt output pin of the analog die indicating errors or
wake-up events.
Wake-Up Inputs These pins are the wake-up inputs of the analog chip.
High Side Output These output pins are low RDS(ON) high side switches.
Power Supply Pins These pins are device power supply pins.
LIN Bus
Power Ground Pins
This pin represents the single-wire bus transmitter and receiver.
These pins are device power ground connections.
Voltage Regulator
Output
Amplifier Power
Supply
Amplifier Output
Amplifier Inputs
Window
Watchdog
Configuration Pin
LIN Transceiver
Output
The +5.0 V voltage regulator output pin is intended to supply the
embedded microcontroller.
This pin is the single +5.0 V power supply for the current sense
operational amplifier.
This pin is the output of the current sense operational amplifier.
These pins are the current sense operational amplifier inverted and
non-inverted inputs.
This input pin is for configuration of the watchdog period and allows the
disabling of the watchdog.
This pin is the output of LIN transceiver.
908E624
4
Analog Integrated Circuit Device Data
Freescale Semiconductor

4페이지










908E624 전자부품, 판매, 대치품
ELECTRICAL CHARACTERISTICS
STATIC ELECTRICAL CHARACTERISTICS
STATIC ELECTRICAL CHARACTERISTICS
Table 3. Static Electrical Characteristics
All characteristics are for the analog chip only. Refer to the 68HC908EY16 data sheet for characteristics of the microcontroller
chip. Characteristics noted under conditions 9.0 V VSUP 16 V, -40 °C TJ 125 °C, unless otherwise noted. Typical values
noted reflect the approximate parameter mean at TA = 25°C under nominal conditions, unless otherwise noted.
Characteristic
Symbol
Min
Typ
Max Unit
SUPPLY VOLTAGE RANGE
Nominal Operating Voltage
Functional Operating Voltage (6)
VSUP 5.5 — 18 V
VSUPOP
27 V
SUPPLY CURRENT RANGE
Normal Mode (7)
VSUP = 13.5 V, Analog Chip in Normal Mode, MCU Operating Using
Internal Oscillator at 32 MHz (8.0 MHz Bus Frequency), SPI, ESCI, ADC
Enabled
Stop Mode (7), (8)
IRUN
— 20 — mA
VSUP = 13.5 V, LIN in recessive state
Sleep Mode (7), (8)
ISTOP — 60 75 μA
VSUP = 13.5 V, LIN in recessive state
ISLEEP
35
45 μA
DIGITAL INTERFACE RATINGS (ANALOG DIE)
Output Pin RST_A
Low-state Output Voltage (IOUT = -1.5 mA)
High-state Output Current (VOUT > 3.5 V)
Pull-down Current Limitation
Output Pin IRQ_A
Low-state Output Voltage (IOUT = -1.5 mA)
High-state Output Voltage (IOUT = 250 μA)
VOL — — 0.4 V
IOH — 250 — μA
IOL_MAX
-1.5
-8.0 mA
VOL
VOH
——
3.85 —
V
0.4
Output Pin RXD
Low-state Output Voltage (IOUT = -1.5 mA)
High-state Output Voltage (IOUT = 250 μA)
Capacitance (9)
VOL — — 0.4 V
VOH 3.85 — — V
CIN — 4.0 — pF
Input Pin PWMIN
Input Logic Low Voltage
Input Logic High Voltage
Input Current
Capacitance (9)
VIL — — 1.5 V
VIH
3.5 —
—V
IIN
-10 —
10 μA
CIN — 4.0 — pF
Pin TXD, SS–Pull-up Current
IPU — 40 — μA
Notes
6. Device is fully functional. All functions are operating. Over-temperature may occur.
7. Total current (IVSUP1 + IVSUP2) measured at GND pin.
8. Stop and Sleep mode current will increase if VSUP exceeds 15 V.
9. This parameter is guaranteed by process monitoring but is not production tested.
Analog Integrated Circuit Device Data
Freescale Semiconductor
908E624
7

7페이지



구       성총 30 페이지
다운로드[ 908E624.PDF 데이터시트 ]
구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

휴대전화 : 010-3582-2743


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877, [ 홈페이지 ]



링크공유

링크 :

관련 데이터시트

부품번호상세설명 및 기능제조사
908E621

Integrated Quad Half-Bridge and Triple High-Side

Freescale Semiconductor
Freescale Semiconductor
908E622

Triple High-Side and EC Glass Driver

Freescale Semiconductor
Freescale Semiconductor

DataSheet.kr    |   2019   |  연락처   |  링크모음   |   검색  |   사이트맵