|
|
|
부품번호 | 0805USBN-941MRC 기능 |
|
|
기능 | Ultra Low Profile Common Mode Choke | ||
제조업체 | Coilcraft | ||
로고 | |||
전체 2 페이지수
Document 1304-1
Ultra Low Profile Common Mode Choke 0805
• For noise suppression in super high speed signal lines: USB 3.x,
HDMI 2.0, HDBaseT™, DisplayPort, DVI, etc.; and in high speed
differential signal lines: USB 2.0, IEEE1394, LVDS, etc.
• Up to 6.5 GHz differential mode 3 dB cutoff frequency; up to
35 dB common mode noise attenuation in GHz range
• Lowest profile 0805 common mode choke – 0.93 mm tall
Core material Ferrite
Environmental RoHS compliant
Terminations Matte tin over nickel over silver-platinum-glass frit.
Weight 9.0 – 13.0 mg
Ambient temperature –40°C to +125°C with Irms current.
Maximum part temperature 140°C
Storage temperature Component: –40°C to +155°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 2000/7″ reel; 7500/13″ reel; Plastic tape: 8 mm wide,
0.23 mm thick, 4 mm pocket spacing, 1.07 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Part number1
Common mode
impedance typ (Ohms)
10 MHz 100 MHz 500 MHz
Common mode DCR
attenuation typ (dB) Inductance2 max3 Isolation4 Irms5
10 MHz 100 MHz 500 MHz min (nH) (Ohms) (Vrms) (mA)
0805USBN-121MR_ 2
0805USBN-271MR_ 3
0805USBN-481MR_ 5
0805USBN-701MR_ 7
0805USBN-941MR_ 10
12 57
27 125
48 231
70 342
94 493
0.04 0.5 5.0
0.09 1.4 10.0
0.13 3.5 14.7
0.18 5.3 17.4
0.30 7.6 21.1
14
30
53
77
105
0.11 250 500
0.14 250 500
0.22 250 500
0.235 250 500
0.27 250 500
0805USBN-132MR_ 13 130 697
0805USBN-162MR_ 17 165 955
0805USBN-222MR_ 24 225 1310
0.50 10.0 24.4
0.78 12.1 27.3
1.14 14.0 30.0
140
182
252
0.32
0.37
0.63
250 500
250 450
250 350
1. When ordering, please specify packaging code:
0805USBN-222MRC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plas-
tic tape (7500 parts per full reel).
2. Inductance measured at 100 MHz using an Agilent/HP 4286A
impedance analyzer and a Coilcraft SMD-A fixture.
3. DCR is specified per winding.
4. Winding to winding isolation (hipot) tested for one minute.
5. Current per winding that causes a 15°C rise from 25°C ambient.
5. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
0.087
2,2
max
0.020 0.040
0,51 1,02
1
4
0.037
0,93
max
0.004
0,10
0.018
0,46
2
0.055
1,4
max
3
Dimensions
are
in
inches
mm
12
43
0.030 0.036
0,76 0,91
2
0.014
1 0,36
34
Recommended
Land Pattern
0.020
0,51
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 1304-1 Revised 05/11/16
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
| |||
구 성 | 총 2 페이지수 | ||
다운로드 | [ 0805USBN-941MRC.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
0805USBN-941MRB | Ultra Low Profile Common Mode Choke | Coilcraft |
0805USBN-941MRC | Ultra Low Profile Common Mode Choke | Coilcraft |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |