Datasheet.kr   

MUX8520 데이터시트 PDF




Aeroflex Circuit Technology에서 제조한 전자 부품 MUX8520은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


 

PDF 형식의 MUX8520 자료 제공

부품번호 MUX8520 기능
기능 16-Channel Analog Multiplexer Module
제조업체 Aeroflex Circuit Technology
로고 Aeroflex Circuit Technology 로고


MUX8520 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.



전체 8 페이지수

미리보기를 사용할 수 없습니다

MUX8520 데이터시트, 핀배열, 회로
Standard Products
MUX8520 16-Channel Analog Multiplexer Module
Radiation Tolerant & ESD Protected
www.aeroflex.com/mux
May 17, 2011
FEATURES
16 Channels provided by one multiplexer
Radiation performance
- Total dose:
- SEU:
300 krads(Si), Dose rate = 50 - 300 rads(Si)/s
Immune up to 120 MeV-cm2/mg
- SEL:
Immune by process design
Full military temperature range
Low power consumption < 15mW
One address bus A0~A3, and one enable line
All channel inputs protected by ±20V nominal Transorbs
Fast access time 1500ns typical
Break-Before-Make switching
High analog input impedance (power on or off )
Designed for aerospace and high reliability space applications
Packaging – Hermetic ceramic
- 56 leads, 0.80"Sq x 0.20"Ht quad flat pack
- Typical Weight 6 grams
GENERAL DESCRIPTION
Aeroflex’s MUX8520 is a radiation tolerant, 16 channel multiplexer MCM (Multi Chip Module) with
electrostatic discharge (ESD) protection on all channel inputs.
The MUX8520 has been specifically designed to meet exposure to radiation environments. It is available
in a 56 lead High Temperature Co-Fired Ceramic (HTCC) Quad Flatpack (CQFP). It is guaranteed
operational from -55°C to +125°C. Available screened in accordance with MIL-PRF-38534, the
MUX8520 is ideal for demanding military and space applications.
ORGANIZATION AND APPLICATION
The MUX8520 consists of one 16 channel multiplexer arranged as shown in the block diagram,
addressable by bus A0~A3 including enable which connects the addressed channel to a single output.
SCD8520 Rev B




MUX8520 pdf, 반도체, 판매, 대치품
DC ELECTRICAL PERFORMANCE CHARACTERISTICS 1/ (continued)
(TC = -55°C TO +125°C, +VEE = +15V, -VEE = -15V, VREF = +5.0V -- UNLESS OTHERWISE SPECIFIED)
Parameter
Symbol
Conditions
Min Max Units
Positive Input
Leakage Current
(CH0-CH15)
+ISOFFOUTPUT(ALL)
VIN = +10V, VEN = 4V, output and all unused MUX inputs
under test = -10V 2/, 3/
-100
+700
nA
Negative Input
Leakage Current
(CH0-CH15)
-ISOFFOUTPUT(ALL)
VIN = -10V, VEN = 4V, output and all unused MUX inputs
under test = +10V 2/, 3/
-100 +700
nA
Positive Output
Leakage Current
OUTPUT (pin 12)
+IDOFFOUTPUT(ALL)
VOUT = +10V, VEN = 4V, output and all unused MUX inputs
under test = -10V 3/, 4/
-100
+100
nA
Negative Output
Leakage Current
OUTPUT (pin 12)
-IDOFFOUTPUT(ALL)
VOUT = -10V, VEN = 4V, output and all unused MUX inputs
under test = +10V 3/, 4/
-100
+100
nA
Input Clamped Voltage
(CH0-CH15)
Input Clamped Voltage
(CH0-CH15)
+VCLMP
-VCLMP
VEN = 4V, all unused MUX inputs under test
are open. 3/
+25°C
+125°C
-55°C
+25°C
+125°C
-55°C
18.0
18.0
17.5
-23.0
-23.5
-22.5
23.0
23.5
22.5
-18.0
-18.0
-17.5
V
V
V
V
V
V
Switch ON Resistance
OUTPUTS (pin 12)
RDS(ON)(0-15)A
RDS(ON)(0-15)B
RDS(ON)(0-15)C
VIN = +15V, VEN = 0.8V, IOUT = -1mA 2/, 3/, 5/
VIN = +5V, VEN = 0.8V, IOUT = -1mA 2/, 3/, 5/
VIN = -5V, VEN = 0.8V, IOUT = +1mA 2/, 3/, 5/
500 3000
500 3000
500 3000
Notes:
1/ Measure inputs sequentially. Ground all unused inputs of the device under test. VA is the applied input voltage to the address lines A(0-3).
2/ VIN is the applied input voltage to the input channels (CH0-CH15).
3/ VEN is the applied input voltage to the enable line EN(0-15).
4/ VOUT is the applied input voltage to the output line OUTPUT (0-15)
5/ Negative current is the current flowing out of each of the MUX pins. Positive current is the current flowing into each MUX pin.
6/ Not tested, guaranteed to the specified limits.
SWITCHING CHARACTERISTICS
(TC = -55°C TO +125°C, +VEE = +15V, -VEE = -15V, VREF = +5.0V - UNLESS OTHERWISE SPECIFIED)
Parameter
Switching Test MUX
Symbol
tAHL
tALH
tONEN
tOFFEN
Conditions
RL = 10KCL = 50pF
RL = 10KCL = 50pF
Tc = +25°C, +125°C
Tc = -55°C
RL = 1KCL = 50pF
Min Max
10 1500
10 2000
10 5000
10 1500
10 1000
Units
ns
ns
ns
ns
ns
SCD8520 Rev B 5/17/11
4
Aeroflex Plainview

4페이지










MUX8520 전자부품, 판매, 대치품
PIN NUMBERS & FUNCTIONS
MUX8520 – 56 Leads Ceramic QUAD Flat Pack
Pin #
Function
Pin #
Function
1 CH0
29 NC
2 CH1
30 NC
3 CH2
31 NC
4 CH3
32 NC
5 CH4
33 NC
6 CH5
34 NC
7 GND
35 GND
8 GND
36 GND
9 CH6
37 NC
10 CH7
38 NC
11 CASE GND
39 VREF
12 OUTPUT (0-15) 40 NC
13 EN (0-15)
41 NC
14 A0
42 NC
15 A1
43 NC
16 A2
44 NC
17 A3
45 NC
18 +VEE
46 -VEE
19 CH15
47 NC
20 CH14
48 NC
21 GND
49 GND
22 GND
50 GND
23 CH13
51 NC
24 CH12
52 NC
25 CH11
53 NC
26 CH10
54 NC
27 CH9
55 NC
28 CH8
56 NC
Notes:
1. It is recommended that all "NC" or "no connect pin", be grounded. This eliminates or minimizes any ESD or static buildup.
2. Package lid is internally connected to circuit ground (Pins 7, 8, 11, 21, 22, 35, 36, 49, 50).
SCD8520 Rev B 5/17/11
7
Aeroflex Plainview

7페이지


구       성 총 8 페이지수
다운로드[ MUX8520.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
MUX8520

16-Channel Analog Multiplexer Module

Aeroflex Circuit Technology
Aeroflex Circuit Technology
MUX8521

16-Channel Analog Multiplexer Module

Aeroflex Circuit Technology
Aeroflex Circuit Technology

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵