|
|
PDF SSF4953 Data sheet ( Hoja de datos )
| Número de pieza | SSF4953 | |
| Descripción | MOSFET ( Transistor ) | |
| Fabricantes | Silikron Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SSF4953 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
SSF4953
DESCRIPTION
The SSF4953 uses advanced trench technology to
provide excellent RDS(ON), low gate charge. It has
been optimized for power management applications
requiring a wide range of gave drive voltage ratings
(4.5V – 25V).
GENERAL FEATURES
●VDS = -30V,ID = -5.3A
RDS(ON) < 85mΩ @ VGS=-4.5V
RDS(ON) < 53mΩ @ V GS=-10V
● High Power and current handing capability
● Lead free product is acquired
● Surface Mount Package
D1
G1
G2
D2
S1 S2
Schematic diagram
D1 D1 D2 D2
8 7 65
4953
1 2 34
S1 G1 S2 G2
Marking and pin Assignment
Application
●Battery protection
●Load switch
●Power management
SOP-8 top view
PACKAGE MARKING AND ORDERING INFORMATION
Device Marking
Device
Device Package
Reel Size
4953
SSF4953
SOP-8
Ø330mm
Tape width
12mm
Quantity
3000 units
ABSOLUTE MAXIMUM RATINGS(TA=25℃unless otherwise noted)
Parameter
Symbol
Drain-Source Voltage
VDS
Gate-Source Voltage
VGS
Drain Current-Continuous@ Current-Pulsed (Note 1)
ID
IDM
Maximum Power Dissipation
PD
Operating Junction and Storage Temperature Range
TJ,TSTG
THERMAL CHARACTERISTICS
Thermal Resistance,Junction-to-Ambient (Note 2)
RθJA
Limit
-30
±20
-5.3
-35
2.0
-55 To 150
62.5
Unit
V
V
A
A
W
℃
℃/W
ELECTRICAL CHARACTERISTICS (TA=25℃unless otherwise noted)
Parameter
Symbol
Condition
OFF CHARACTERISTICS
Drain-Source Breakdown Voltage
BVDSS
VGS=0V ID=-250μA
Zero Gate Voltage Drain Current
IDSS VDS=-24V,VGS=0V
Gate-Body Leakage Current
IGSS VGS=±25V,VDS=0V
Min Typ Max Unit
-30 V
-1 μA
±100
nA
©Silikron Semiconductor CO.,LTD.
1
http://www.silikron.com
v1.1
1 page  
SSF4953
ATTENTION:
■ Any and all Silikron products described or contained herein do not have specifications that can handle applications that require
extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can
be reasonably expected to result in serious physical and/or material damage. Consult with your Silikron
representative nearest you before using any Silikron products described or contained herein in such applications.
■ Silikron assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in
products specifications of any and all Silikron products described or contained herein.
■ Specifications of any and all Silikron products described or contained herein stipulate the performance, characteristics, and
functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and
functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that
cannot be evaluated in an independent device, the customer should always evaluate and test devices
mounted in the customer’s products or equipment.
■ Silikron Semiconductor CO.,LTD. strives to supply high-quality high-reliability products. However, any and all semiconductor
products fail with some probability. It is possible that these probabilistic failures could give rise to
accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to
other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such
measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and
structural design.
■ In the event that any or all Silikron products(including technical data, services) described or contained herein are controlled under
any of applicable local export control laws and regulations, such products must not be exported without obtaining the export
license from the authorities concerned in accordance with the above law.
■ No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including
photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of
Silikron Semiconductor CO.,LTD.
■ Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume
production. Silikron believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use
or any infringements of intellectual property rights or other rights of third parties.
■ Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the Silikron product
that you intend to use.
■ This catalog provides information as of Dec, 2008. Specifications and information herein are subject to change without notice.
©Silikron Semiconductor CO.,LTD.
5
http://www.silikron.com
v1.1
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet SSF4953.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SSF4953 | MOSFET ( Transistor ) | Silikron Semiconductor |
| SSF4953 | Dual P-Channel MOSFET |  GOOD-ARK |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |