|
|
|
부품번호 | CCS803 기능 |
|
|
기능 | Ultra-low power gas sensor | ||
제조업체 | CMOS Sensors | ||
로고 | |||
전체 6 페이지수
CC-000017-DS revision: 11
Datasheet for CCS803
CCS803 Ultra-low power gas sensor for Ethanol detection
Cambridge CMOS Sensors (CCS) micro-hotplate technology
provides a unique silicon platform for the CCS80x range of Metal
Oxide (MOX) gas sensors. These devices enable sensor
miniaturisation, have ultra-low power consumption and provide
fast response times due to the ability to heat the micro-hotplate
very quickly.
The micro-hotplates are fabricated using a robust silicon dioxide
membrane and include an embedded tungsten heating element
to heat the MOX based sensing material. The MOX sensing
material can be heated up to 500°C to allow the electrical
resistance of the MOX sensor to be monitored to detect the
target gas. By exploiting the fast heater cycling times,
temperature modulation techniques can be used to reduce the
device power consumption and implement advanced gas sensing
methods.
Software libraries containing proprietary algorithms and example
Android application are available for alcohol breathalyser use
case.
Key Benefits
Ultra-low power
consumption - ideal for
battery operated devices
High sensitivity to Ethanol
Fast heating time <25ms
for quick response
Compact 2mm x 3mm
DFN package for small
form factor designs
Product Overview
The CCS803 is an ultra-low power MOX gas sensor for monitoring
Ethanol.
For CCS803 a supply voltage (VH) is provided to the integrated
micro-heater and the gas concentration can be correlated to the
change in resistance of the MOX sensing layer (RS).
VH can be set using a low-dropout (LDO) regulator or operated in
pulsed PWM mode to reduce power consumption. The sensor
resistance (RS) is typically determined using a series load resistor
(RL), a reference voltage (VREF), and an output voltage (VOUT) read
by an Analogue-to-Digital Converter (ADC). The reference voltage
(VREF) must only be enabled during the sensor reading.
CCS803 is supported in a compact 2 mm x 3 mm DFN (Dual Flat
No lead) package as standard.
Recommended Sensor
Configuration
Applications
Detection of Ethanol
Alcohol breathalyser in
consumer devices
Page | 1
© Cambridge CMOS Sensors Ltd, Deanland House, Cowley Road, Cambridge, CB4 0DL, UK
Website: www.ccmoss.com
Telephone: +44 1223 395 551
Date Issued: 26 May 2016
CC-000017-DS revision: 11
Datasheet for CCS803
4. An ADC input is required on the MCU to measure the sensor resistance, the recommended ADC
reference voltage (VREF) depends on what voltage range the ADC supports. Control of the sensor bias
(VREF) [e.g. by using an external MOSFET switch (p-channel)] is required to power the sensor bias only
when needed for the ADC measurements, ensuring that all reference voltages are stable for the
measurement.
5. A minimum load resistor (RL) value of 1kΩ is recommended.
Pin Assignment
Pin No
1
2
3
4
Name
Sensor+
Heater+
Sensor-
Heater-
Description
Sensor output (VOUT)
Heater Input (VH)
Connect to Ground or 0V
Connect to Ground or 0V
Page | 4
© Cambridge CMOS Sensors Ltd, Deanland House, Cowley Road, Cambridge, CB4 0DL, UK
Website: www.ccmoss.com
Telephone: +44 1223 395 551
Date Issued: 26 May 2016
4페이지 | |||
구 성 | 총 6 페이지수 | ||
다운로드 | [ CCS803.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
CCS801 | Ultra-low power multi-gas sensor | CMOS Sensors |
CCS803 | Ultra-low power gas sensor | CMOS Sensors |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |