Datasheet.kr   

PEX8532 데이터시트 PDF




PLX에서 제조한 전자 부품 PEX8532은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 PEX8532 자료 제공

부품번호 PEX8532 기능
기능 Flexible & Versatile PCI Express Switches
제조업체 PLX
로고 PLX 로고


PEX8532 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 4 페이지수

미리보기를 사용할 수 없습니다

PEX8532 데이터시트, 핀배열, 회로
. Version 1.1 2004
Features
PEX 8532 & PEX 8516§ PEX 8532 General Features
o 32-lane PCI Express switch
o Integrated SerDes
o Eight configurable ports
(x1, x2, x4, x8, x16)
o 35mm x35mm, 680 pin enhanced
Flexible & Versatile PCI Express™ Switches
PBGA package, 6.5 Watts
§ PEX 8516 General Features
Multi-purpose and Feature Rich PCI Express Switch Family
o 16-lane PCI Express switch
o Integrated SerDes
o Four configurable ports
The 32-lane PEX 8532 and 16-lane PEX 8516 products offer PCI Express
switching capability conforming to the latest revision of the PCI Express Base
(x1, x2, x4, x8)
specification. These products enable users to add scalable high bandwidth, non-
o 27mm x 27mm, 312 pin enhanced
PBGA package, 3.5 Watts
§ PEX 8532 & PEX 8516 Common
blocking interconnection to a wide variety of applications including servers, storage
systems, communications platforms , blade servers, and embedded-control products.
The PEX 8532/16 products can be used as fanout, aggregation, or peer-to-peer
Features
o Standards Compliant
- PCI Express Base Specification, r1.0a
switches, and are equally we ll-suited to fabric backplane and intelligent I/O
module applications.
- PCI Standard SHPC Specification, r1.1
o High Performance
- Non-blocking Switch Fabric
Highly Flexible Port Configurations
The PEX 8532/16 offer highly configurable ports. There are a maximum of 8 ports
- Full Line rate
(4 for PEX 8516) that can be configured to any legal width from x1 to x16 (x8 max
o Configurable Non-transparent port for
Multi-Host or Intelligent I/O Support
o Flexible Configuration
- Eight (four for PEX8516) highly flexible
and configurable ports
- Flexible lane width/port x2(x1), x4, x8,
for PEX 8516), in any combination to support your specific bandwidth needs. The
ports can be symmetric (each port having the same lane width) or asymmetric
(ports having different lane widths). If you can think of a port/lane combination, you
can configure it! Any of the ports can be designated as the upstream port, and you
can even dynamically change the upstream port.
(x16 for PEX 8532 only)
- Configurable with strapping pins,
End-to-end Packet Integrity
EEPROM, or Host software
The PEX family provides end-to-end CRC protection (ECRC) and Poison bit
- Lane and polarity reversal
o PCI Express Power Management
- Link power management states: L0, L0s,
L1, L2/L3 Ready, and L3
support to enable designs that require guaranteed error -free packets. These
features are optional in the PCI Express specification, but PLX provides them across
its entire PEX product line.
- Device states: D0 and D3hot
o Quality of Service (QoS)
- Two Virtual Channels/port
- Eight Traffic Classes/port
Non-Transparent “Bridging” in a PCI Express Switch
The PEX 8532/16 product family supports full non-transparent bridging functionality
to allow implementation of multi-host systems and intelligent I/O modules in
- Fixed and WRR Virtual Channel
applications such as communications, storage, and blade servers. To ensure quick
arbitration
- Round robin port arbitration
o Reliability, Availability, Serviceability
(RAS)
product migration, the non-transparency features are implemented in the same
fashion as in standard PCI applications.
Non-transparent bridges allow systems to isolate memory domains by presenting the
- Standard Hot-Plug Controller
- Upstream port as hot -plug client
- Transaction Layer end-to-end CRC
- Poison bit
- Error reporting in addition to advanced
processor subsystem as an endpoint, rather than another memory system. Base
address registers are used to translate addresses; doorbell registers are used to send
interrupts between the address domains; and scratchpad registers are accessible from
both address domains to allow inter-processor communication.
error reporting support of PCI Express
- Per port performance monitoring
Average packet size, number of
packets, CRC errors
Two Virtual Channels
The PEX 8532/16 products support 2 full-featured Virtual Channels (VCs) and a full
8 Traffic Classes (TCs). The mapping of Traffic Classes to port-specific Virtual
- JTAG boundary scan
Channels allows for different mappings for different ports. In addition, the devices
offer user-selectable Virtual Channel arbitration algorithms to enable users to fine
tune the Quality of Service (QoS) required for a specific application.
Low Power with Granular SerDes Control
The PEX 8532/16 provide low power capability that is fully compliant with the PCI
Express power management specification. In addition, the SerDes physical links can
be turned off when unused for even lower power.




PEX8532 pdf, 반도체, 판매, 대치품
Software Usage Model
From a system model viewpoint, each PCI Express port is a
virtual PCI to PCI bridge device and has its own set of PCI
Express configuration registers. The PEX 8532/16 uses port 0
as the upstream port by default, but any port can be configured
as the upstream port by using an optional EEPROM, or
through strapping pins. It is through the upstream port that the
BIOS or host can configure the other ports using standard PCI
enumeration.
System Configuration
The virtual PCI to PCI bridges within the PEX 8532/16 are
compliant to the PCI and PCI Express system models. The
Configuration Space Registers (CSRs) in a virtual
primary/secondary PCI to PCI bridge are accessible by type 0
configuration cycles through the virtual primary bus interface
(matching bus number, device number, and function number).
Interrupt Sources/Events
The PEX 8532/16 switches support the INTx interrupt
message type (compatible with PCI 2.3 Interrupt signals) or
Message Signaled Interrupts (MSI) when enabled.
Interrupts/messages are generated by PEX 8532/16 for hot
plug events , baseline error reporting, and advanced error
reporting.
Development Tools
PLX is offering hardware and software tools (PEX 8532RDK)
to enable rapid customer design activity. These tools include
the hardware Rapid Development Kit (RDK) and the Software
Development Kit (SDK).
Hot Plug
Ckt.
Manual
Reset
PORT 8 - X8
PORT 10 - X4
PORT 9 -X4
Port 8 Status
LEDs
HD Power
Connector
Port 10 Status
LEDs
Port 9 Status
LEDs
JTAG
Header
RefClk
PERST#
MidbusSite
DIP switch
for cfg.
PEX 8532PEX8532
(socketable )
Midbus Site
x16
(Upstream Port)
EEPROM
Port 0 Status
LEDs
Figure 6. PEX 8532RDK
PEX 8532RDK
The RDK hardware module includes the PEX 8532 with one
x16 (card-edge slot) port, two x4 ports and one x8 port (slot
connectors). The RDK is available with x16, x8 and x4
connectors (card-edge type).
The PEX 8532RDK can be installed in a motherboard, used as
a riser card, or configured as a bench-top board.
The PEX 8532RDK can be used to test and validate customer
software. Additionally, it can be used as an evaluation vehicle
for the PEX 8532 features and benefits.
SDK
The SDK tool set includes:
- Linux and Windows drivers
- C/C++ Source code, Objects, libraries
- User’s Guides, Application examples, Tutorials
Product Ordering Information
Part Number
Description
PLX Technology, Inc.
870 Maude Ave.
Sunnyvale, CA 94085 USA
Tel: 1-800-759-3735
Tel: 1-408-774-9060
Fax: 1-408-774-2169
Web Site: www.plxtech.com
PEX 8532AA-25BI
PEX 8516AA-25BI
PEX 8532RDK
32-Lane PCI Express Switch
16-Lane PCI Express Switch
Rapid Development Kit for PEX 8532
Please visit the PLX Web site at http://www.plxtech.com or contact PLX sales at 408-774-9060 for sampling.
© 2004 PLX Technology, Inc. All rights reserved. PLX and the PLX logo are registered trademarks of PLX Technology, Inc. PowerDrive and the PowerDrive logo are
trademarks of PLX Technology, Inc., which may be registered in some jurisdiction. All other product names that appear in this material are for identification purposes only
and are acknowledged to be trademarks or registered trademarks of their respective companies. Information supplied by PLX is believed to be accurate and reliable, but
PLX Technology, Inc. assumes no responsibility for any errors that may appear in this material. PLX Technology, Inc. reserves the right, without notice, to make changes in
product design or specification.
PCI8532/8516-SIL-PB-P1-1.0
4/04 750

4페이지












구       성 총 4 페이지수
다운로드[ PEX8532.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
PEX8532

Flexible & Versatile PCI Express Switches

PLX
PLX
PEX8533

Flexible & Versatile PCI Express Switches

PLX
PLX

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵