|
|
Número de pieza | AS111 | |
Descripción | Voltage Comparator | |
Fabricantes | Micross | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AS111 (archivo pdf) en la parte inferior de esta página. Total 21 Páginas | ||
No Preview Available ! Voltage Comparator
AVAILABLE AS MILITARY
SPECIFICATIONS
• SMD 5962-86877
• M38510/10304B
• MIL-STD-883, 1.2.1
FEATURES
• Operates from single 5V supply
• Input current: 150 nA max. over temperature
• Offset current: 20 nA max. over temperature
• Differential input voltage range: ±30V
• Power consumption: 135 mW at ±15V
OPTIONS
• Packages
8 pin Ceramic DIP
14 pin Ceramic DIP
20 pin Ceramic LCC
8 Lead Metal Can
• Temperature Ranges
Extended (-55oC to +125oC)
MIL-STD-883 paragraph 1.2.1
(-55oC to +125oC)
MARKINGS
C008
C014
E020
TO08
XT
/883
GENERAL DESCRIPTION
The AS111 is a voltage comparator that has input currents
nearly a thousand times lower than other similar devices like.
It is also designed to operate over a wider range of supply
voltages: from standard ±15V op amp supplies down to the
single 5V supply used for IC logic. Their output is compatible
with RTL, DTL and TTL as well as MOS circuits. Further,
they can drive lamps or relays, switching voltages up to 50V
at currents as high as 50 mA.
Both the inputs and the outputs of the AS111 can be
isolated from system ground, and the output can drive loads
referred to ground, the positive supply or the negative supply.
Offset balancing and strobe capability are provided and out-
puts can be wire OR’ed. Although slower than some devices
(200 ns response time vs 40 ns), this device is also much less
prone to spurious oscillations.
For more products and information
please visit our web site at
www.micross.com
AS111
Rev. 1.7 01/10
1
Voltage
Comparator
AS111
PIN ASSIGNMENT
(Top View)
8 Pin Ceramic DIP (C008)
GND 1
INPUT+ 2
INPUT-
V-
3
4
8 V+
7 OUTPUT
6 BALANCE/
STROBE
5 BALANCE
14 Pin Ceramic DIP (C014)
NC 1
GND 2
INPUT+ 3
INPUT- 4
NC 5
V- 6
BALANCE 7
14 NC
13 NC
12 NC
11 V+
10 NC
9 OUTPUT
8 BSTARLOABNECE/
8 Lead Metal Can (TO08)
GND 1
INPUT+ 2
INPUT- 3
V+
8
7 OUTPUT
6 BALANCE/STROBE
5 BALANCE
V4 -
20 Pin Ceramic LCC (E020)
Micross Components reserves the right to change products or specifications without notice.
1 page TYPICAL PERFORMANCE CHARACTERISTICS
Voltage
Comparator
AS111
AS111
Rev. 1.7 01/10
Micross Components reserves the right to change products or specifications without notice.
5
5 Page Voltage
Comparator
AS111
TYPICAL APPLICATIONS (Pin numbers refer to TO08 can package)(Continued)
AS111
Rev. 1.7 01/10
11
Micross Components reserves the right to change products or specifications without notice.
11 Page |
Páginas | Total 21 Páginas | |
PDF Descargar | [ Datasheet AS111.PDF ] |
Número de pieza | Descripción | Fabricantes |
AS1100 | Serially Interfaced 8-Digit LED Driver | AMSCO |
AS1101 | (AS1101 - AS1104) Low-Dropout LED Drivers | AMSCO |
AS1102 | (AS1101 - AS1104) Low-Dropout LED Drivers | AMSCO |
AS1103 | (AS1101 - AS1104) Low-Dropout LED Drivers | AMSCO |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |