DataSheet.es    


PDF SY10EP16U Data sheet ( Hoja de datos )

Número de pieza SY10EP16U
Descripción 2.5/3.3V Precision ECL Differential Receiver/Driver
Fabricantes Micrel Semiconductor 
Logotipo Micrel Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de SY10EP16U (archivo pdf) en la parte inferior de esta página.


Total 15 Páginas

No Preview Available ! SY10EP16U Hoja de datos, Descripción, Manual

SY10/100EP16U
2.5/3.3V Precision ECL Differential
Receiver/Driver
General Description
The SY10/100EP16U is a 2.5/3.3V, high-speed, fully
differential ECL Receiver/Driver that can process
clock signals as fast as 3GHz or data patterns up to
2.5Gbps.
The differential input includes an internal 75kpull-
down resistor on both the true and complement inputs
and a 37.5kpull-up resistor in the complement input
only. For AC-coupled input interface and single-ended
applications, an integrated voltage reference (VBB) is
provided. Single-ended CLK input operation is limited
to VCC 3.0V in PECL mode, or VEE -3.0V. The VBB
pin should be used only as a bias for the
SY10/100EP16U since its current sink/source
capability is limited. Whenever used, the VBB pin
should be bypassed to the most positive supply
voltage. The output is 800mV ECL, with fast rise/fall
times guaranteed to be less than 200ps.
When the inputs are left open, the internal input
clamps will force the Q output low.
The SY10/100EP16U operates from a 2.5V ±5% or
3.3V ±10% supply and is guaranteed over the full
industrial temperature range (–40°C to +85°C). The
SY100EP16V is part of Micrel’s high-speed, Precision
Edge® product line.
Datasheets and support documentation can be found
on Micrel’s web site at: www.micrel.com.
Functional Block Diagram
Features
Precision Edge®
Precision 800mV ECL Receiver/Driver
10K and 100K ECL compatible I/O
Guaranteed AC performance over temperature and
voltage:
– DC-to > 2.5Gbps throughput
– 240ps typical propagation delay (D-to-Q)
– <200ps rise/fall times
Ultra-low jitter design
– < 0.3psRMS random jitter
PECL and NECL operation capability
PECL operating range: VCC = 2.375V to 3.63V with
VEE = 0V
NECL operating range: VCC = 0V with VEE = -2.375V
to -3.63V
2.5V ±5% or 3.3V ±10% power supply operation
Industrial temperature range: –40°C to +85°C
Available in 8-pin (2mm x 2mm) MLF®, 8-pin MSOP,
8-pin SOIC packages
Applications
All SONET clock and data distribution
Fibre Channel clock and data distribution
Gigabit Ethernet clock and data distribution
Backplane distribution
Markets
Storage
ATE
Test and measurement
Enterprise networking equipment
High-end servers
Access
Metro area network equipment
Precision Edge is a registered trademark of Micrel, Inc.
MLF and MicroLeadFrame are registered trademarks of Amkor Technology.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
December 2008
M9999-121808-A
[email protected] or (408) 955-1690

1 page




SY10EP16U pdf
Micrel, Inc.
SY10/100EP16U
10EP DC Electrical Characteristics(8)
VCC = 3.3V ±10%, VEE = 0V; TA = –40°C to +85°C, unless otherwise stated(9)
-40°C
25°C
Symbol
Parameter
Min Typ Max Min Typ
IEE Power Supply Current
17 25
17
VOH Output HIGH Voltage(10) 2165 2290 2415 2230 2355
VOL Output LOW Voltage(10)
1365 1540 1665 1430 1605
VIH Input HIGH Voltage
(Single-Ended)
2090
2415 2155
VIL Input LOW Voltage
(Single-Ended)
1365
1690 1430
VBB Output Voltage Reference(11) 1790 1890 1990 1855 1955
VIHCMR
Input HIGH Voltage
Common Mode Range
(Differential Configuration)(12)
1.2
3.3 1.2
IIH Input HIGH Current
150
IIL
Input LOW Current
D 0.5
/D -150
0.5
-150
Max
25
2480
1730
2480
1755
2055
3.3
150
Min
2290
1490
2215
1490
1915
1.2
0.5
-150
85°C
Typ
17
2415
1665
2015
Max
25
2540
1790
2540
1815
2115
3.3
150
Units
mA
mV
mV
mV
mV
mV
V
µA
µA
10EP DC Electrical Characteristics(8)
VCC = 0V, VEE = -3.63V to -2.375V; TA = –40°C to +85°C, unless otherwise stated.(9)
-40°C
25°C
85°C
Symbol
Parameter
Min Typ Max Min Typ Max Min Typ Max Units
IEE Power Supply Current
17 25
17 25
17 25 mA
VOH
Output HIGH Voltage(10)
-1135 -1010 -885 -1070 -945 -820 -1010 -885 -760 mV
VOL
Output LOW Voltage(10)
-1935 -1760 -1635 -1870 -1695 -1570 -1810 -1635 -1510 mV
VIH Input HIGH Voltage
(Single-Ended)
-1210
-885 -1145
-820 -1085
-760 mV
VIL Input LOW Voltage
(Single-Ended)
-1935
-1610 -1870
-1545 -1810
-1485 mV
VBB Output Voltage
Reference(13)
-1510 -1410 -1310 -1445 -1345 -1245 -1385 -1285 -1185 mV
VIHCMR
Input HIGH Voltage
Common Mode Range
(Differential
Configuration)(12)
VEE
+1.2
0 VEE 0
+1.2
VEE
+1.2
0
V
IIH Input HIGH Current
150
IIL
Input LOW Current
D 0.5
/D -150
0.5
-150
0.5
-150
µA
µA
Notes:
8. The circuit is designed to meet the DC specifications shown in the above table after thermal equilibrium has been established.
9. Input and output parameters vary 1:1 with VCC.
10. All loading with 50to VCC–2.0V.
11. Single ended input CLK pin operation is limited to VCC 3.0V in PECL mode.
12. VIHCMR (min) varies 1:1 with VEE, VIHCMR (max) varies 1:1 with VCC. The VIHCMR range is referenced to the most positive side of the differential
input signal.
13. Single ended input CLK pin operation is limited to VCC -3.0V in NECL mode.
December 2008
5 M9999-121808-A
[email protected] or (408) 955-1690

5 Page





SY10EP16U arduino
Micrel, Inc.
SY10/100EP16U
Functional Characteristics (continued)
VCC = 2.5V, GND = 0V, 100k version, VIN = 150mV, RL = 50to VCC-2V, TA = 25°C, unless otherwise stated.
Single-Ended and Differential Swings
Figure 1a. Single-Ended Swing
Figure 1b. Differential Swing
December 2008
11 M9999-121808-A
[email protected] or (408) 955-1690

11 Page







PáginasTotal 15 Páginas
PDF Descargar[ Datasheet SY10EP16U.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
SY10EP16U2.5/3.3V Precision ECL Differential Receiver/DriverMicrel Semiconductor
Micrel Semiconductor
SY10EP16VHigh-speed Differential ReceiverMicrel Semiconductor
Micrel Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar