|
|
|
부품번호 | OPB732 기능 |
|
|
기능 | Long Distance Reflective Switch | ||
제조업체 | OPTEK | ||
로고 | |||
전체 3 페이지수
Long Distance Reflective Switch
OPB732, OPB732WZ
Features:
• PC board mounting (OPB732)
• 24” (610 mm) 26 AWG wired with mounting tabs (OPB732WZ)
• Non-contact infrared switch
• Up to 1” or more reflective distance depending on circuitry
OPB732
OPB732WZ
Description:
OPB732 uses an Infrared LED and Phototransistor in a reflective switch configuration. The assembly is offered
with either PCBoard through hole pins (OPB732) or 24” (610 mm), 26 AWG wires (OPB732WZ), and uses an
opaque housing to reduce the sensor’s ambient light sensitivity. The emitter and sensor are protected by a clear
window, providing a device that can operate in a dusty environment. The phototransistor can be configured as a
Common Collector or Common Emitter device.
While an object is in the reflective path of the device, light from the LED will be reflected back to the housing
irradiating the surface (base) of the phototransistor. When Infrared light strikes the phototransistor, the transistor
becomes forward biased and is considered to be in the “ON” state, providing an IC(ON) current proportional to the
light striking the phototransistor. With the Infrared light from the LED not being reflected to the phototransistor, the
phototransistor turns “OFF,” minimizing the IC(ON) current.
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for
more information.
Applications:
• Non-contact reflective object sensor
• Assembly line automation
• Machine automation
• Equipment security
• Door sensor
• Machine safety
• End of travel sensor
Part
Number
OPB732
OPB732WZ
[ MILLIMETERS]
DIMENSIONS ARE IN:
INCHES
32
41
Ordering Information
LED Peak
Wavelength
Lead Length / Spacing
850 nm
0.150”/ see diagram
24" / 26 AWG Wire
Pin #
Green-1
White-2
Red-3
Black-4
LED
Emitter
Collector
Anode
Cathode
RoHS
OPB732
OPB732WZ
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.3 09/06
Page 1 of 3
| |||
구 성 | 총 3 페이지수 | ||
다운로드 | [ OPB732.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
OPB730 | Reflective Object Sensor | OPTEK |
OPB730F | Reflective Object Sensor | OPTEK |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |