|
|
|
부품번호 | SAFFB881MFM0F0A 기능 |
|
|
기능 | SAW FILTER | ||
제조업체 | muRata | ||
로고 | |||
전체 7 페이지수
SAW FILTER FOR Band5 Cell Diversity Rx
Murata part number : SAFFB881MFM0F0A
Package Dimensions
Top View
Specification
Item
Spec if ic ation
-30 to 85°C
25±2°C
typ.
Nominal Center Frequency(fc)
881.5MHz
1.10±0.05
(5) (4)
(1)
Dot Marking(0.2)
HA
$
(2) (3)
Bottom View
(2) (3)
(0.15)
Insertion Loss
(869 to 894MHz)
Absolute Attenuation
1) 0.1 to 824 MHz
2) 824 to 849 MHz
3) 1738 to 1788 MHz
4) 1850 to 1910 MHz
5) 1920 to 1980 MHz
6) 2400 to 2484 MHz
7) 3296 to 3396 MHz
8) 3396 to 6000 MHz
Ripple Deviation
(869 to 894MHz)
2.5 dB max. 2.3 dB max. 1.8 dB
50 dB min.
50 dB min.
50 dB min.
50 dB min.
50 dB min.
50 dB min.
48 dB min.
30 dB min.
50 dB min.
50 dB min.
50 dB min.
50 dB min.
50 dB min.
50 dB min.
48 dB min.
30 dB min.
1.0 dB max. 0.9 dB max.
65 dB
54 dB
68 dB
66 dB
65 dB
59 dB
55 dB
47 dB
0.5 dB
(1)
VSWR
2.0 max.
1.8 max.
1.7
(869 to 894MHz)
(0.05)
2-0.20±0.03
(5) (4)
5-0.20±0.03
2-0.20±0.03
Marking: Laser Printing
* : EIAJ Code
(Refer to the table 1)
$ : Date Code
(Refer to the table 2)
(1) : Unbalance port
(3) (4) : Balance port
Others : Ground
Amplitude Balance
(869 to 894MHz)
Phase Balance
(869 to 894MHz)
Unbalance Port Matching Impedance
(nominal)
Balance Port Matching Impedance
(nominal)
Input Signal Level
±1.0dB max. ±1.0dB max.
-0.2 dB
180±5deg. 180±5deg. 180.0+1.4deg.
max.
max.
50Ω
100Ω//82nH
31.6mW (+15dBm), 2000 hours
Unit : mm
October 5, 2010
1/5
SAW FILTER FOR Band5 Cell Diversity Rx
Murata part number : SAFFB881MFM0F0A
Recommended Land Pattern
Top View
1.1
Test Circuit
Bottom View
50Ω
0.25
2-0.20
2-0.20
2-0.25
2-0.20
: Land Pattern
Unit : mm
23
1
54
82nH
100Ω
October 5, 2010
4/5
4페이지 SAW FILTER FOR Band5 Cell Diversity Rx
Murata part number : SAFFB881MFM0F0A
Customer acknowledges that Murata will, if requested by you, conduct a failure analysis for defect or alleged defect of
Products only at the level required for consumer grade Products, and thus such analysis may not always be available
or be in accordance with your request (for example, in cases where the defect was caused by components in Products
supplied to Murata from a third party).
The product shall not be used in any other application/model than that of claimed to Murata.
Customer acknowledges that engineering samples may deviate from specifications and may contain defects due to
their development status.
We reject any liability or product warranty for engineering samples.
In particular we disclaim liability for damages caused by
・the use of the engineering sample other than for evaluation purposes, particularly the installation or integration in the
product to be sold by you,
・deviation or lapse in function of engineering sample,
・improper use of engineering samples.
We disclaims any liability for consequential and incidental damages.
If you can’t agree the above contents, you should inquire our sales.
October 5, 2010
7페이지 | |||
구 성 | 총 7 페이지수 | ||
다운로드 | [ SAFFB881MFM0F0A.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
SAFFB881MFM0F0A | SAW FILTER | muRata |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |