DataSheet.es    


PDF SURTD5000RMXLP Data sheet ( Hoja de datos )

Número de pieza SURTD5000RMXLP
Descripción Smart-UPS RT Uninterruptible Power Supply User Manual
Fabricantes APC 
Logotipo APC Logotipo



Hay una vista previa y un enlace de descarga de SURTD5000RMXLP (archivo pdf) en la parte inferior de esta página.


Total 27 Páginas

No Preview Available ! SURTD5000RMXLP Hoja de datos, Descripción, Manual

User Manual
Smart-UPSRT
Uninterruptible Power Supply
SURTD5000RMXLP
SURTD6000RMXLP
120/208/240 Vac
SURTD6000RMXLJP
100/200 Vac
Rack Mount 3U/Tower

1 page




SURTD5000RMXLP pdf
• The attachment plug receptacles near the unit or subsystem must all be of a grounding
type, and the grounding conductors serving these receptacles must be connected to
earth ground at the service equipment.
• The battery typically lasts for two to five years. Environmental factors impact battery
life. Elevated ambient temperatures, poor quality utility power, and frequent short
duration discharges will shorten battery life.
• The equipment is heavy. Always practice safe lifting techniques adequate for the
weight of the equipment.
• The batteries are heavy. Remove the batteries before installing the UPS and XLBP in a
rack.
• Always install XLBPs at the bottom in rack-mount or stack configurations. The UPS
must be installed above the XLBPs.
• Always install peripheral equipment above the UPS in rack-mount or stack
configurations.
• The UPS will recognize as many as 10 external battery packs connected to the UPS.
However there is no limit to the number of XLBPs that can be used with the UPS.
• The model and serial numbers are located on a small, rear panel label. For some
models, an additional label is located on the chassis under the front bezel.
• Always recycle used batteries.
• Recycle the package materials or save them for reuse.
2

5 Page





SURTD5000RMXLP arduino
BASIC CONNECTORS
Serial Port
Connect the UPS to a computer terminal.
Use only cables approved by APC by Schneider Electric.
Any other interface cable will be incompatible with the UPS
connector.
Manually put equipment into bypass mode.
On-Line or
Bypass Switch
Connect the UPS to the central EPO system.
EPO Terminal
TVSS Screw
External Battery
Pack Connector
Connect the ground lead on surge suppression devices, such as telephone
and network line protectors.
When connecting grounding cable, disconnect the unit from the utility
power outlet.
Optional external battery packs provide extended run time during power
outages. These units support up to ten external battery packs.
See the APC by Schneider Electric web site, www.apc.com for the
information on the external battery pack, SURT192RMXLBP.
CONNECT EQUIPMENT AND POWER TO THE UPS
1. Connect equipment to the UPS (cables not included). Avoid using extension cords.
Using a power cord, plug the UPS into a three-pole, four-wire, grounded receptacle only.
SURTD6000RMXLP3U and SURTD6000RMXLJP3U models: To draw full power from the
UPS have a qualified electrician cut off the input plug and hardwire the UPS to the
appropriate power panel.
2. Turn on all connected equipment. To use the UPS as a master ON/OFF switch, ensure all
connected equipment is switched ON. The equipment will not be powered until the UPS is
turned on.
3. Press Test on the front panel to turn the UPS on.
The UPS battery charges when it is connected to utility power. The battery charges to 90%
capacity during the first three hours of normal operation. Do not expect full battery run
capability during this initial charge period.
OPTIONS
Refer to the APC by Schneider Electric web site, www.apc.com for available accessories.
‰ External Battery Pack SURT192RMXLBP, SURT192XLBP
‰ Service Bypass Panel
8

11 Page







PáginasTotal 27 Páginas
PDF Descargar[ Datasheet SURTD5000RMXLP.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
SURTD5000RMXLPSmart-UPS RT Uninterruptible Power Supply User ManualAPC
APC

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar