Datasheet.kr   

SURT5000 데이터시트 PDF




APC에서 제조한 전자 부품 SURT5000은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 SURT5000 자료 제공

부품번호 SURT5000 기능
기능 Smart-UPS RT Tower/Rack Mount 3U Uninterruptible Power Supply User Manual
제조업체 APC
로고 APC 로고


SURT5000 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.



전체 19 페이지수

미리보기를 사용할 수 없습니다

SURT5000 데이터시트, 핀배열, 회로
User Manual
English
Smart-UPS® RT
3000/5000/6000 VA 200-240 Vac
Tower/Rack Mount 3U
Uninterruptible Power Supply
© 2012 APC by Schneider Electric. APC, the APC logo, and Smart-UPS are owned by Schneider Electric Industries S.A.S.,
American Power Conversion Corporation, or affiliated companies. All other trademarks are the property of their respective
owners.
990-1289F 01/2012




SURT5000 pdf, 반도체, 판매, 대치품
Wiring and Connecting the UPS
5000/6000 VA XLI MODELS ONLY: HARDWIRING INSTRUCTIONS
Wiring must be performed by a qualified electrician.
Install a high magnetic 30/32 A utility circuit breaker.
Adhere to all national and local electrical codes.
Use #10 AWG gauge (5 mm2) wire.
1. Switch the utility circuit breaker OFF.
2. Remove the input access panel.
3. Remove circular knockout.
4. Run #10 AWG gauge (5 mm2) wire through the access panel, and connect the wires to the
terminal block (green: ground, brown: hot, blue: neutral). Use an appropriate strain relief (not
included).
5. Switch the utility circuit breaker ON.
6. Check line voltages.
7. Replace the access panel.
2

4페이지










SURT5000 전자부품, 판매, 대치품
CONNECTING EQUIPMENT AND POWER TO THE UPS
1. Connect equipment to the UPS (cables not included for XLJ/XLT/XLTW models).
2. Avoid using extension cords.
3000 VA XLJ/XLT/XLTW/XLI and 5000/6000 VA XLJ/XLT/XLTW models: Using a power
cord, plug the UPS into a two-pole, three-wire, grounded receptacle only.
5000/6000 VA XLJ and 6000 VA XLT models: To draw full power from the UPS have a
qualified electrician cut off the input plug and hardwire the UPS to the appropriate power
panel.
3. Turn on all connected equipment. To use the UPS as a master ON/OFF switch, ensure all
connected equipment is switched ON. The equipment will not be powered until the UPS is
turned on.
4. To power up the UPS press the button on the front panel.
The UPS battery charges when it is connected to utility power. The battery charges to 90%
capacity during the first three hours of normal operation. Do not expect full battery run
capability during this initial charge period.
5. For additional computer system security, install PowerChute Business Edition Smart-UPS
monitoring software.
OPTIONS
Refer to the APC Web site, www.apc.com for available accessories.
External Battery Pack SURT192XLBP
Rail Kit SURTRK2
Isolation Transformer
Service Bypass Panel
.
5

7페이지


구       성 총 19 페이지수
다운로드[ SURT5000.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
SURT5000

Smart-UPS RT Tower/Rack Mount 3U Uninterruptible Power Supply User Manual

APC
APC

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵