MG64F225 Datasheet PDF - Megawin
| Part Number | MG64F225 | |
| Description | MCU ( Micro Controller Unit ) | |
| Manufacturers | Megawin | |
| Logo |  |
|
|
There is a preview and MG64F225 download ( pdf file ) link at the bottom of this page. Total 30 Pages | ||
Preview 1 page No Preview Available !
笙泉科技股份有限公司
Megawin Technology Co., Ltd.
MG64F225
Data Sheet
65C02 MCU with an
USB 2.0 low-speed interface
This document information is the intellectual property of Megawin Technology.
Megawin Technology Co., Ltd. 2011 All right reserved.
QP-7300-03D
1/68
Version 1.00
|
| |
 
MG64F225 Datasheet
V1.00
2 Features
6502 8-bit CPU Core
4K Bytes MTP ROM
Flash write/erase cycle: 100
Flash data retention: 100 years at 25℃
256 bytes Data SRAM
Data RAM (0100H to 01BFH) and stacks RAM (01C0H to 01FFH).
Address 0100h~01BFH and 0000h~00BFH share the same memory block.
34+2 Programmable GPIO
Port 0 shared 1 pin with FOSC output (6MHz / 3MHz / 1.5MHz)
Port 1 shared 2 pins with T0CKO/PWM0 and T1CKO/PWM1.
Port 2 shared with SPI interface (3 pins) and ICP interface (3 pins)
Port 3 shared with external crystal and external interrupt.
Port 0/1/2/3 support Wakeup Function.
Port 0/1/2/3/4 LED direct sink pins.
Support VDDO pin to setup output voltage.
Master Mode SPI Interface
Clock Rate : 1.5MHz, 750KHz
MSB / LSB of the data byte is transmitted first.
Timer / PWM
8-bit auto-reload timer (Timer0) support T0CKO/PWM0 to P1.1
8-bit auto-reload timer (Timer1) support T1CKO/PWM1 to P1.2
Programmable Watch-dog Timer (WDT)
Programmable system clock (6MHz / 3MHz)
USB 2.0 low speed device controller
Built-in USB low-speed (1.5Mbps) transceiver
8-bytes FIFO for endpoint 0 Control IN/OUT.
8-bytes FIFO for endpoint 1 Interrupt IN.
8-bytes FIFO for endpoint 2 Interrupt IN/OUT, default is IN.
Supports USB suspend/resume and remote wake-up event.
Software-controlled USB disconnection mechanism.
DP/DM combine with PS/2 Mode (PS2_CLK and PS2_Data)
Built-in 5v to 3.3v regulator.
Built-in 6Mhz±1.5% IHRCO with temperature -20℃ ~ 85℃.
Low-Voltage detect: LVDF (Low Voltage detect Flag): 3.6V±5%
Power saving modes
Halt(Idle) mode
Stop(Power-down) mode
Operating condition:
Operating voltage: 2.7V ~ 5.5V with USB off-line application
Operating voltage: 4.0V ~ 5.5V with USB on-line application
Operating speed range: DC to 6MHz @VDD>2.7V
Operating ambient temperature: -20℃ ~ 85℃ for internal oscillator mode
Operating ambient temperature: -20℃ ~ 85℃ for external crystal mode
Package Type
DICE : MG64F225H
LQFP-48 : MG64F225AD48
SSOP-16 : MG64F225AL16
This document information is the intellectual property of Megawin Technology.
Megawin Technology Co., Ltd. 2013 All right reserved.
QP-7300-03D
5/68
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for MG64F225 electronic component. |
| Information | Total 30 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ MG64F225.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| MG64F225 | The function is MCU ( Micro Controller Unit ). Megawin | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
MG64
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||