|
|
PDF PD080SL1 Data sheet ( Hoja de datos )
| Número de pieza | PD080SL1 | |
| Descripción | Display Module | |
| Fabricantes | Prime View | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PD080SL1 (archivo pdf) en la parte inferior de esta página. Total 26 Páginas | ||
|
No Preview Available !
Version :3.0
P-511-393(V:3)
PD080SL1
TECHNICAL SPECIFICATION
MODEL NO : PD080SL1
The content of this information is subject to be changed without notice.
Please contact PVI or its agent for further information.
Customer’s Confirmation
Customer
Date
By
PVI’s Confirmation
Confirmed By
Prepared By
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:1
1 page  
4. Mechanical Drawing of TFT-LCD Module
P-511-393(V:3)
PD080SL1
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:5
5 Page 
7-2) Recommended Driving Condition for Back Light
P-511-393(V:3)
PD080SL1
Item
Symbol Min. Typ. Max. Unit
Remark
Lamp Current
IFL 3
5
8
mA
5mA : 420 cd/㎡
Note 7-3、Note 7-5
Lamp Driving Frequency
FL 25 40 80 KHz
Lamp Voltage
VL - 510 - Vrms IFL=5mA，Note 7-3
Starting Voltage (25℃) (Reference Value)
Vs
-
- 960 Vrms
Starting Voltage (0℃) (Reference Value) Vs -
- 1030 Vrms
Note 7-4
Starting Voltage (-25℃) (Reference Value) Vs
-
- 1120 Vrms
Total power consumption (at IFL=5mA)
- - 5.1 8 W
Note 7-6
Note 7-3 : The back-light driving waveform should be as closed to sine-wave as possible.
In order to satisfy the quality of B/L , no matter use what kind of inverter , the each output lamp
current must between Min. and Max. to avoid the abnormal display image caused by B/L.
Note 7-4 : The “Starting voltage ” means the minimum voltage of inverter to turn on the CCFL. and it should be
applied to the lamp for more than 1 second to start up. Otherwise the lamp may not be turned on.
Note 7-5: Lamp current is measured with current meter for high frequency as shown below
TFT-LCD
Module
1
2
4
* Pin 4 is Vlow
** Current meter :
Yokogawa 2016-01
~
A
Lamp current dissipation testing configuration
Inverter
Note 7-6 : Not including the efficiency of backlight DC/AC inverter
7-3) Backlight driving
Connector type : “BHR-04VS-1” of Japan Solder less Terminal MFG Co. LTD
PIN NO.
1
2
3
4
Symbol
VL1
VL2
NC
VL4
Description
Input Voltage(High)
Input Voltage(High)
Input Voltage(Low)
Remark
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:11
11 Page | ||
| Páginas | Total 26 Páginas | |
| PDF Descargar | [ Datasheet PD080SL1.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PD080SL1 | Display Module | Prime View |
| PD080SL2 | Display Module |  PRIME VIEW |
| PD080SL3 | Display Module | PRIME VIEW |
| PD080SL5 | Display Module | Prime View |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |