DataSheet.es    


PDF HMC1094LP3E Data sheet ( Hoja de datos )

Número de pieza HMC1094LP3E
Descripción LOGARITHMIC DETECTOR
Fabricantes Hittite 
Logotipo Hittite Logotipo



Hay una vista previa y un enlace de descarga de HMC1094LP3E (archivo pdf) en la parte inferior de esta página.


Total 8 Páginas

No Preview Available ! HMC1094LP3E Hoja de datos, Descripción, Manual

v00.0813
Typical Applications
The HMC1094LP3E is ideal for:
Point-to-Point Microwave Radio
VSAT
Wideband Power Monitoring
Receiver Signal Strength Indication (RSSI)
Test & Measurement
HMC1094LP3E
50 dB, LOGARITHMIC
DETECTOR, 1 - 23 GHz
Features
Wide Input Bandwidth: 1 to 23 GHz
Wide Dynamic Range: 50 dB up to 23 GHz
Single Positive Supply: +3.3V
Excellent Stability Over Temperature
Fast Rise / Fall Time: 12 / 65 ns
16 Lead 3x3 mm SMT Package: 9 mm²
Functional Diagram
General Description
The HMC1094LP3E Logarithmic Detector converts
RF signals at its input, to a proportional DC voltage at
its output. The HMC1094LP3E employs successive
compression topology which delivers high dynamic
range over a wide input frequency range. As the input
power is increased, successive amplifiers move into
saturation one by one creating an approximation of
the logarithm function. The output of a series of
detectors is summed, converted into the voltage
domain and buffered to drive the LOGOUT output.
The HMC1094LP3E provides a nominal logarithmic
slope of +18 mV/dB and an intercept of -113 dBm at
23 GHz. Ideal as a log detector for high volume micro-
wave radio and VSAT applications, the HMC1094LP3E
is housed in a compact 3x3 mm RoHS compliant SMT
plastic package.
Electrical Specifications, TA = +25°C VCC = +3.3V
Parameter
Typ.
Typ.
Typ.
Typ.
Typ.
Typ.
Typ.
Typ.
Units
Input Frequency[1]
1 5 10 14 16 18 20 23 GHz
±3 dB Dynamic Range
48 48 48 50 54 54 55 57
dB
±3 dB Dynamic Range Center -20 -22 -23 -24 -25 -26 -27 -24 dBm
Log Error Over Temperature
(-40°C to +85°C)
±0.8
±0.7
±0.5
±1
±0.7
±0.7
±0.8
±1.1
dB
Output Intercept
-96
-97
-100
-105
-108
-111
-113
-113
dBm
Output Slope
20 21 20 19 19 18 18 18 mV/dB
[1] Video output load should be 1K Ohm or higher.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
1
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]

1 page




HMC1094LP3E pdf
v00.0813
Absolute Maximum Ratings
Vcc
RF Input Power
RF DC Level
Maximum Junction Temperature
Continuous Pdiss (T = 85°C)
(Derate 65.4 mW/°C above 85°C)
Thermal Resistance (Rth)
(junction to ground paddle)
Storage Temperature
Operating Temperature
ESD Sensitivity (HBM)
Outline Drawing
+3.6V
+13 dBm
+1.1V
125 °C
2.62 W
15.29 °C/W
-65 to +150 °C
-40 to +85 °C
Class 1B
HMC1094LP3E
50dB, LOGARITHMIC
DETECTOR, 1 - 23 GHz
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
NOTES:
1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED PLASTIC SILICA
AND SILICON IMPREGNATED.
2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY.
3. LEAD AND GROUND PADDLE PLATING: 100% MATTE TIN.
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
6. CHARACTERS TO BE HELVETICA MEDIUM, .018 HIGH, WHITE INK, OR LASER MARK
LOCATED APPROX. AS SHOWN.
7. PAD BURR LENGTH SHALL BE 0.15mm MAX. PAD BURR HEIGHT SHALL BE 0.05mm
MAX.
8. PACKAGE WARP SHALL NOT EXCEED 0.05mm
9. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF
GROUND.
10. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN.
Package Information
Part Number
Package Body Material
HMC1094LP3E RoHS-compliant Low Stress Injection Molded Plastic
[1] 4-Digit lot number XXXX
[2] Max peak reflow temperature of 260 °C
Lead Finish
100% matte Sn
MSL Rating
MSL1 [2]
Package Marking [1]
H1094
XXX
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
5
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]

5 Page










PáginasTotal 8 Páginas
PDF Descargar[ Datasheet HMC1094LP3E.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
HMC1094LP3ELOGARITHMIC DETECTORHittite
Hittite

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar