Datasheet.kr   

TSOP34138 PDF 데이터시트 : 부품 기능 및 핀배열

부품번호 TSOP34138
기능 IR Receiver Modules
제조업체 Vishay
로고 Vishay 로고 



전체 7 페이지

		

No Preview Available !

TSOP34138 데이터시트, 핀배열, 회로
TSOP321.., TSOP323.., TSOP325.., TSOP341.., TSOP343.., TSOP345..
www.vishay.com
Vishay Semiconductors
IR Receiver Modules for Remote Control Systems
1
2
3
16672
MECHANICAL DATA
Pinning for TSOP341.., TSOP343.., TSOP345..:
1 = OUT, 2 = GND, 3 = VS
Pinning for TSOP321.., TSOP323.., TSOP325..:
1 = OUT, 2 = VS, 3 = GND
FEATURES
• Very low supply current
• Photo detector and preamplifier in one package
• Internal filter for PCM frequency
• Improved shielding against EMI
• Supply voltage: 2.5 V to 5.5 V
• Improved immunity against ambient light
• Insensitive to supply voltage ripple and noise
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
DESCRIPTION
These products are miniaturized receivers for infrared
remote control systems. A PIN diode and a preamplifier are
assembled on a lead frame, the epoxy package contains an
IR filter. The demodulated output signal can be directly
connected to a microprocessor for decoding.
The TSOP323.., TSOP343..series devices are optimized to
suppress almost all spurious pulses from energy saving
lamps like CFLs. AGC3 may also suppress some data
signals if continuously transmitted.
The TSOP321.., TSOP341.. series are provided primarily for
compatibility with old AGC1 designs. New designs should
prefer the TSOP323.., TSOP343.. series containing the
newer AGC3. The TSOP325.., TSOP345.. series contain a
very robust AGC5. This series should only be used for
critically noisy environments.
These components have not been qualified according to
automotive specifications.
PARTS TABLE
AGC
Carrier
frequency
Package
30 kHz
33 kHz
36 kHz
38 kHz
40 kHz
56 kHz
Pinning
Dimensions (mm)
Mounting
Application
Best receiver for
remote control code
LEGACY, FOR SHORT BURST
REMOTE CONTROLS (AGC1)
NOISY ENVIRONMENTS AND
SHORT BURSTS (AGC3)
VERY NOISY ENVIRONMENTS
AND SHORT BURSTS (AGC5)
TSOP34130
TSOP32130
TSOP34330
TSOP32330
TSOP34530
TSOP32530
TSOP34133
TSOP32133
TSOP34333
TSOP32333
TSOP34533
TSOP32533
TSOP34136
TSOP32136
TSOP34336 (1)(6) TSOP32336 (1)(6)
TSOP34536
TSOP32536
TSOP34138
TSOP32138 TSOP34338 (2)(3)(4)(5) TSOP32338 (2)(3)(4)(5) TSOP34538
TSOP32538
TSOP34140
TSOP32140
TSOP34340
TSOP32340
TSOP34540
TSOP32540
TSOP34156
TSOP32156
TSOP34356
TSOP32356
TSOP34556
TSOP32556
Mold
1 = OUT, 1 = OUT, 2 = VS,
2 = GND, 3 = VS 3 = GND
1 = OUT,
2 = GND, 3 = VS
1 = OUT, 2 = VS,
3 = GND
6.0 W x 6.95 H x 5.6 D
1 = OUT, 1 = OUT, 2 = VS,
2 = GND, 3 = VS
3 = GND
Leaded
Remote control
(1) MCIR (2) Mitsubishi (3) RECS-80 Code (4) r-map (5) XMP-1, XMP-2 (6) RCMM
Rev. 1.5, 22-Jul-16
1 Document Number: 82490
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000




TSOP34138 pdf, 반도체, 판매, 대치품
TSOP321.., TSOP323.., TSOP325.., TSOP341.., TSOP343.., TSOP345..
www.vishay.com
Vishay Semiconductors
3.0
2.5
2.0 f = f0
f = 30 kHz
1.5
f = 10 kHz
f = 100 Hz
1.0
0.5
0
1 10 100 1000
ΔVS RMS - AC Voltage on DC Supply Voltage (mV)
Fig. 7 - Sensitivity vs. Supply Voltage Disturbances
1.0
f = 38 kHz,
0.9 Ee = 2 mW/m²
0.8
0.7
0.6
TSOP341..
0.5 TSOP321..
0.4
0.3
0.2 TSOP343.., TSOP323..
0.1
0
0
TSOP345.., TSOP325..
20 40 60 80 100 120
22180-8 Burst Length (Number of Cycles/Burst)
Fig. 8 - Maximum Envelope Duty Cycle vs. Burst Length
0.20
0.18
0.16
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0
-30 -10 10 30 50 70 90
Tamb - Ambient Temperature (°C)
Fig. 9 - Sensitivity vs. Ambient Temperature
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
750 800 850 900 950 1000 1050 1100 1150
21425
λ- Wavelength (nm)
Fig. 10 - Relative Spectral Sensitivity vs. Wavelength
0° 10° 20°
30°
40°
1.0
0.9 50°
0.8 60°
70°
0.7
80°
0.6 0.4 0.2 0
96 12223p2 drel - Relative Transmission Distance
Fig. 11 - Horizontal Directivity
0.20
0.18
0.16
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0.00
1
234
VS - Supply Voltage (V)
5
Fig. 12 - Sensitivity vs. Supply Voltage
Rev. 1.5, 22-Jul-16
4 Document Number: 82490
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

4페이지










TSOP34138 전자부품, 판매, 대치품
www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
1 Document Number: 91000

7페이지



구       성총 7 페이지
다운로드[ TSOP34138.PDF 데이터시트 ]
구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

상호 : 아이지 인터내셔날

사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ]



링크공유

링크 :

관련 데이터시트

부품번호상세설명 및 기능제조사
TSOP34130

IR Receiver Modules

Vishay
Vishay
TSOP34133

IR Receiver Modules

Vishay
Vishay

DataSheet.kr    |   2020   |  연락처   |  링크모음   |   검색  |   사이트맵