Datasheet.kr   

BAT54HM PDF 데이터시트 : 부품 기능 및 핀배열

부품번호 BAT54HM
기능 Schottky Barrier Diode
제조업체 ROHM
로고 ROHM 로고 



전체 7 페이지

		

No Preview Available !

BAT54HM 데이터시트, 핀배열, 회로
Schottky Barrier Diode
BAT54HM
Data Sheet
lApplication
Small current rectification
lDimensions (Unit : mm)
lLand Size Figure (Unit : mm)
1.9
lFeatures
1) Small power mold type
(SOT-23)
2) High reliability
3) Low VF
lConstruction
Silicon epitaxial planar type
5A
ROHM : SSD3
JEDEC : SOT-23
JEITA : -
lTaping Dimensions (Unit : mm)
2.4
1.0MIN
SOT-23
0.8MIN
lStructure
(3)
(1) Anode
(2) N.C.
(3) Cathode
(1) (2)
lAbsolute Maximum Ratings (Ta= 25°C)
Parameter
Symbol
Repetitive peak reverse voltage
Reverse voltage
Forward current
Repetitive peak forward current
Non-repetitive forward surge current
VRM
VR
IF
IFRM
IFSM
Junction temperature
Tj
Storage temperature
Tstg
Conditions
Duty0.5
Direct reverse voltage
Direct forward current
t 1s, Duty0.5
60Hz half sin wave, one cycle,
Non-repetitive at Ta=25ºC
-
-
Limits Unit
30 V
30 V
200 mA
300 mA
600 mA
150 °C
-55 to +150 °C
lElectrical Characteristics (Ta= 25°C)
Parameter
Symbol
Conditions
Min. Typ. Max. Unit
Forward voltage
Reverse current
Reverse recovery time
Capacitance between terminals
VF1 IF=0.1mA -
VF2 IF=1mA -
VF3 IF=10mA -
VF4 IF=30mA -
VF5 IF=100mA -
IR
VR=25V
-
trr IF=IR=10mA, RL=50Ω, Irr=1mA -
Ct f=1MHz, VR=1V -
- 240 mV
- 320 mV
- 400 mV
- 500 mV
- 800 mV
- 2 mA
- 50 ns
- 12 pF
www.rohm.com
© 2016 ROHM Co., Ltd. All rights reserved.
1/3
2016.08 - Rev.A




BAT54HM pdf, 반도체, 판매, 대치품
Datasheet
Notice
Precaution on using ROHM Products
1. Our Products are designed and manufactured for application in ordinary electronic equipments (such as AV equipment,
OA equipment, telecommunication equipment, home electronic appliances, amusement equipment, etc.). If you
intend to use our Products in devices requiring extremely high reliability (such as medical equipment (Note 1), transport
equipment, traffic equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car
accessories, safety devices, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or
serious damage to property (“Specific Applications”), please consult with the ROHM sales representative in advance.
Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way responsible or liable for any
damages, expenses or losses incurred by you or third parties arising from the use of any ROHM’s Products for Specific
Applications.
(Note1) Medical Equipment Classification of the Specific Applications
JAPAN
USA
EU CHINA
CLASS
CLASS
CLASS
CLASSb
CLASS
CLASS
2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor
products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate
safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which
a failure or malfunction of our Products may cause. The following are examples of safety measures:
[a] Installation of protection circuits or other protective devices to improve system safety
[b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure
3. Our Products are designed and manufactured for use under standard conditions and not under any special or
extraordinary environments or conditions, as exemplified below. Accordingly, ROHM shall not be in any way
responsible or liable for any damages, expenses or losses arising from the use of any ROHM’s Products under any
special or extraordinary environments or conditions. If you intend to use our Products under any special or
extraordinary environments or conditions (as exemplified below), your independent verification and confirmation of
product performance, reliability, etc, prior to use, must be necessary:
[a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents
[b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust
[c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2,
H2S, NH3, SO2, and NO2
[d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves
[e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items
[f] Sealing or coating our Products with resin or other coating materials
[g] Use of our Products without cleaning residue of flux (even if you use no-clean type fluxes, cleaning residue of
flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning
residue after soldering
[h] Use of the Products in places subject to dew condensation
4. The Products are not subject to radiation-proof design.
5. Please verify and confirm characteristics of the final or mounted products in using the Products.
6. In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse. is applied,
confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power
exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect
product performance and reliability.
7. De-rate Power Dissipation (Pd) depending on Ambient temperature (Ta). When used in sealed area, confirm the actual
ambient temperature.
8. Confirm that operation temperature is within the specified range described in the product specification.
9. ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in
this document.
Precaution for Mounting / Circuit board design
1. When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product
performance and reliability.
2. In principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must
be used on a through hole mount products. If the flow soldering method is preferred on a surface-mount products,
please consult with the ROHM representative in advance.
For details, please refer to ROHM Mounting specification
Notice-PGA-E
© 20165 ROHM Co., Ltd. All rights reserved.
Rev.001

4페이지










BAT54HM 전자부품, 판매, 대치품
Datasheet
BAT54HM - Web Page
Part Number
Package
Unit Quantity
Minimum Package Quantity
Packing Type
Constitution Materials List
RoHS
BAT54HM
SOT-23
3000
3000
Taping
inquiry
Yes

7페이지



구       성총 7 페이지
다운로드[ BAT54HM.PDF 데이터시트 ]
구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

휴대전화 : 010-3582-2743


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877, [ 홈페이지 ]



링크공유

링크 :

관련 데이터시트

부품번호상세설명 및 기능제조사
BAT54H

Schottky Barrier Diode

LGE
LGE
BAT54H

30V Silicon Hot-Carrier Detector Surface Mount Schottky Barrier Diode

SeCoS
SeCoS

DataSheet.kr    |   2019   |  연락처   |  링크모음   |   검색  |   사이트맵