|
|
|
부품번호 | 5.0SMDJ120CA 기능 |
|
|
기능 | Diode ( Transient Voltage Suppression ) | ||
제조업체 | Littelfuse | ||
로고 | |||
전체 5 페이지수
Transient Voltage Suppression Diodes
Surface Mount – 5000W > 5.0SMDJ series
5.0SMDJ Series
RoHS Pb
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Symbol
Peak Pulse Power Dissipation at
T(FAi=g2.15)O(NCobtey
10x1000µs waveform
1), (Note 2)
PPPM
Power Dissipation on infinite heat
sink at TA=50OC
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave (Note 3)
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional
only
Operating Junction and Storage
Temperature Range
PM(AV)
IFSM
VF
TJ, TSTG
Value
5000
6.5
300
5.0
-65 to 150
Unit
W
W
A
V
°C
Typical Thermal Resistance Junction
to Lead
RuJL
15 °C/W
Typical Thermal Resistance Junction
to Ambient
RuJA
75 °C/W
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
device only,duty cycle=4 per minute maximum.
Description
The 5.0SMDJ series is designed specifically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Features
• Halogen-Free
• Fast response time:
• RoHS compliant
• For surface mounted
applications to optimize
board space
typically less than 1.0ps
from 0V to BV min
• Excellent clamping
capability
• Low profile package
• Low incremental surge
• Built-in strain relief
resistance
• Typical maximum
temperature coefficient
• aTybpoivceal2I2R Vless than 5µA
ΔVBR = 0.1% x VBR@25°C x ΔT
• Glass passivated chip
junction
• 5000W peak pulse power
capability at 10×1000μs
waveform, repetition rate
(duty cycles):0.01%
• High Temperature
soldering guaranteed:
260°C/40 seconds at
terminals
• Plastic package has
Underwriters Laboratory
Flammability 94V-O
• Matte Tin Lead–free Plated
Applications
TVS devices are ideal for the protection of I/O Interfaces,
CVCoCmbpuustaenr,dInodtuhsetrrivaul lannedraCbolencsiurcmueitrseulescetdroinniTcealepcpolimca,tions.
5.0SMDJ Series
1 ©2011 Littelfuse, Inc.
Revision: November 15, 2011, 16:49
Specifications are subject to change without notice.
Please refer to http://www.Littelfuse.com/series/5.0SSMDJ.html for current information.
Transient Voltage Suppression Diodes
Surface Mount – 5000W > 5.0SMDJ series
Soldering Parameters
Reflow Condition
Lead–free assembly
- Temperature Min (Ts(min))
Pre Heat - Temperature Max (Ts(max))
- Time (min to max) (ts)
Average ramp up rate (LiquidusTemp
(TL) to peak
TS(max) to TL - Ramp-up Rate
Reflow
-Temperature (TL) (Liquidus)
- Time (min to max) (ts)
Peak Temperature (TP)
Time within 5°C of actual peak
Temperature (tp)
Ramp-down Rate
Time 25°C to peakTemperature (TP)
Do not exceed
150°C
200°C
60 – 180 secs
3°C/second max
3°C/second max
217°C
60 – 150 seconds
260+0/-5 °C
20 – 40 seconds
6°C/second max
8 minutes Max.
280°C
Physical Specifications
Weight
Case
Polarity
Terminal
0.007 ounce, 0.21 grams
JEDEC DO214AB. Molded plastic body
over glass passivated junction
Color band denotes positive end
(cathode) except Bidirectional.
Matte Tin-plated leads, Solderable per
JESD22-B102D
TP
TL
Ts(max)
Ts(min)
25˚C
Ramp-up
tp
tL
Critical Zone
TL to TP
ts
Preheat
Ramp-down
t 25˚C to Peak
Time (t)
Environmental Specifications
Temperature Cycle
Pressure Cooker
High Temp. Storage
HTRB
Thermal Shock
JESD22-A104
JESD 22-A102
JESD22-A103
JESD22-A108
JESD22-A106
Dimensions
DO-214AB (SMC J-Bend)
Cathode Band
AC
B
H
D
F
EG
DimJensions in Kinches and L(millimeters)
I
5.0SMDJ Series
Solder Pads
(all dimensions in mm)
Dimensions
A
B
C
D
E
F
G
H
I
J
K
L
Inches
Min Max
0.114
0.126
0.260
0.280
0.220
0.245
0.079
0.103
0.030
0.060
- 0.008
0.305
0.320
0.006
0.012
0.129
-
0.094
-
-
0.094
0.165
-
Millimeters
Min Max
2.900
3.200
6.600
7.110
5.590
6.220
2.060
2.620
0.760
1.520
- 0.203
7.750
8.130
0.152
0.305
3.300
-
2.400
-
-
2.400
4.200
-
4 ©2011 Littelfuse, Inc.
Revision: November 15, 2011, 16:49
Specifications are subject to change without notice.
Please refer to http://www.Littelfuse.com/series/5.0SSMDJ.html for current information.
4페이지 | |||
구 성 | 총 5 페이지수 | ||
다운로드 | [ 5.0SMDJ120CA.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
5.0SMDJ120CA | Diode ( Transient Voltage Suppression ) | Littelfuse |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |