Datasheet.kr   

TSOP2240 데이터시트 PDF




Vishay에서 제조한 전자 부품 TSOP2240은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 TSOP2240 자료 제공

부품번호 TSOP2240 기능
기능 IR Sensor Module
제조업체 Vishay
로고 Vishay 로고


TSOP2240 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 7 페이지수

미리보기를 사용할 수 없습니다

TSOP2240 데이터시트, 핀배열, 회로
www.vishay.com
TSOP22.., TSOP24.., TSOP48.., TSOP44..
Vishay Semiconductors
IR Receiver Modules for Remote Control Systems
1
2
3
MECHNICAL DATA
Pinning for TSOP44.., TSOP48..:
1 = OUT, 2 = GND, 3 = VS
Pinning for TSOP22.., TSOP24..:
1 = OUT, 2 = VS, 3 = GND
16672
FEATURES
• Improved immunity against HF and RF noise
• Low supply current
• Photo detector and preamplifier in one package
• Internal filter for PCM frequency
• Supply voltage: 2.5 V to 5.5 V
• Improved immunity against optical noise
• Insensitive to supply voltage ripple and noise
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
DESCRIPTION
The TSOP22.., TSOP48.., TSOP24.. and TSOP44.. series
are miniaturized IR receiver modules for infrared remote
control systems. A PIN diode and a preamplifier are
assembled on lead frame, the epoxy package contains an IR
filter.
The demodulated output signal can be directly connected to
a microprocessor for decoding.
The TSOP24.., TSOP44.. series devices are optimized to
suppress almost all spurious pulses from Wi-Fi and CFL
sources. They may suppress some data signals if
continuously transmitted.
The TSOP22.., TSOP48.. series devices are provided
primarily for compatibility with old AGC2 designs. New
designs should prefer the TSOP24.., TSOP44.. series
containing the newer AGC4.
These components have not been qualified according to
automotive specifications.
PARTS TABLE
AGC
LEGACY, FOR
LONG BURST REMOTE CONTROLS (AGC2)
RECOMMENDED FOR
LONG BURST CODES (AGC4)
30 kHz
TSOP4830
TSOP2230
TSOP4430
TSOP2430
33 kHz
TSOP4833
TSOP2233
TSOP4433
TSOP2433
Carrier
36 kHz
frequency 38 kHz
TSOP4836
TSOP4838
TSOP2236
TSOP2238
TSOP4436 (1)(2)(3)
TSOP4438 (4)(5)(6)
TSOP2436 (1)(2)(3)
TSOP2438 (4)(5)(6)
40 kHz
TSOP4840
TSOP2240
TSOP4440
TSOP2440
56 kHz
TSOP4856
TSOP2256
TSOP4456 (6)(7)
TSOP2456 (6)(7)
Package
Mold
Pinning
Dimensions (mm)
1 = OUT, 2 = GND, 3 = VS 1 = OUT, 2 = VS, 3 = GND 1 = OUT, 2 = GND, 3 = VS 1 = OUT, 2 = VS, 3 = GND
6.0 W x 6.95 H x 5.6 D
Mounting
Leaded
Application
Remote control
Best remote control code
(1) RC-5 (2) RC-6 (3) Panasonic (4) NEC (5) Sharp (6) r-step (7) Thomson RCA
Rev. 1.6, 22-Jul-16
1 Document Number: 82459
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000




TSOP2240 pdf, 반도체, 판매, 대치품
www.vishay.com
TSOP22.., TSOP24.., TSOP48.., TSOP44..
Vishay Semiconductors
1.0
0.9
0.8
0.7 f = f0
0.6 f = 10 kHz
f = 100 kHz
0.5
0.4
0.3
0.2
0.1
0
1 10 100 1000
ΔVS RMS - AC Voltage on DC Supply Voltage (mV)
Fig. 7 - Sensitivity vs. Supply Voltage Disturbances
0.8
0.7
0.6
0.5
0.4 TSOP22..
TSOP48..
0.3
0.2
TSOP24..
TSOP44..
0.1
f = 38 kHz, Ee = 2 mW/m²
0
0 20 40 60
80
100 120
21396_13 Burst Length (Number of Cycles/Burst)
Fig. 8 - Max. Envelope Duty Cycle vs. Burst Length
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0
-30 -10 10 30 50 70 90
Tamb - Ambient Temperature (°C)
Fig. 9 - Sensitivity vs. Ambient Temperature
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
750 800 850 900 950 1000 1050 1100 1150
21425
λ- Wavelength (nm)
Fig. 10 - Relative Spectral Sensitivity vs. Wavelength
0° 10° 20°
30°
40°
1.0
0.9 50°
0.8 60°
70°
0.7
80°
0.6 0.4 0.2 0
96 12223p2 drel - Relative Transmission Distance
Fig. 11 - Horizontal Directivity
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
2
345
VS - Supply Voltage (V)
6
Fig. 12 - Sensitivity vs. Supply Voltage
Rev. 1.6, 22-Jul-16
4 Document Number: 82459
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

4페이지










TSOP2240 전자부품, 판매, 대치품
www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
1 Document Number: 91000

7페이지


구       성 총 7 페이지수
다운로드[ TSOP2240.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
TSOP2240

IR Sensor Module

Vishay
Vishay

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵