|
|
PDF GGB240128S0-A01 Data sheet ( Hoja de datos )
| Número de pieza | GGB240128S0-A01 | |
| Descripción | LCM MODULE | |
| Fabricantes | GEMINI | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de GGB240128S0-A01 (archivo pdf) en la parte inferior de esta página. Total 21 Páginas | ||
|
No Preview Available !
SPECIFICATION
FOR
LCM MODULE
MODULE NO.: GGB240128S0-A01
DOC.REVISION 00
SIGNATURE
DATE
PREPARED BY
CHECKED BY
APPROVED BY
CUSTOMER
APPROVAL
SIGNATURE
www.FindLCD.com
DATE
This Specification is subject to change without prior notice. Please contact SHENZHEN GEMINI
TECHNOLOGY CO.,LTD to confirm the latest revision.
If there is no special request from customer, GEMINI will not reserve the tooling of the product
under the following conditions:
1. There is no response from customer in two years after GEMINI submit the samples;
2. There is no order in two years after the latest mass production and correlated data(include
quality record) will be reserved one year more after tooling was discarded.
1 page  
4. DIMENSIONAL OUTLINE
2
5 Page 
Operation Precautions:
1. The viewing angle can be adjusted by varying the LCD driving voltage Vo.
2. Since applied DC voltage causes electro-chemical reactions, which deteriorate the display, the
applied pulse waveform should be a symmetric waveform such that no DC component remains.
Be sure to use the specified operating voltage.
3. Driving voltage should be kept within specified range; excess voltage will shorten display life.
4. Response time increases with decrease in temperature.
5. Display color may be affected at temperatures above its operational range.
6. Keep the temperature within the specified range usage and storage. Excessive temperature
and humidity could cause polarization degradation, polarizer peel-off or generate bubbles.
7. For long-term storage over 40°C is required, the relative humidity should be kept below 60%,
and avoid direct sunlight.
Limited Warranty
GEMINI LCDs and modules are not consumer products, but may be incorporated by GEMINI customers
into consumer products or components thereof, GEMINI does not warrant that its LCDs and
components are fit for any such particular purpose.
1. The liability of GEMINI is limited to repair or replacement on the terms set forth below. GEMINI will
not be responsible for any subsequent or consequential events or injury or damage to any
personnel or user including third party personnel and/or user. Unless otherwise agreed in writing
between GEMINI and the customer, GEMINI will only replace or repair any of its LCD which is found
defective electrically or visually when inspected in accordance with GEMINI general LCD
inspection standard . (Copies available on request)
2. No warranty can be granted if any of the precautions state in handling liquid crystal display
above has been disregarded. Broken glass, scratches on polarizer mechanical damages as well as
defects that are caused accelerated environment tests are excluded from warranty.
3. In returning the LCD/LCM, they must be properly packaged; there should be detailed description
of the failures or defect.
8
11 Page | ||
| Páginas | Total 21 Páginas | |
| PDF Descargar | [ Datasheet GGB240128S0-A01.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| GGB240128S0-A01 | LCM MODULE | GEMINI |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |