|
|
|
부품번호 | OPB840L 기능 |
|
|
기능 | Slotted Optical Switch | ||
제조업체 | TT | ||
로고 | |||
전체 8 페이지수
Slotted Optical Switch
OPB830 and OPB840 Series (L & W)
Features:
• 0.125” (3.18 mm) wide slot
• Choice of electrical output parameters
• Choice of aperture
• Choice of opaque or IR transmissive shell material
• Side mount configuration
• Choice of lead spacing (L Series)
• 24” [610 mm] 26 AWG wire leads (W Series)
L Package
Product Photo Here
W Package
Description:
OPB830 and OPB840 series provide the design engineer with the flexibility of a custom device from a standard
product line. The L Series offers a choice of PCBoard mount lead spacing, while the W Series offers
24” (610mm) 26AWG wire leads.
Building from a standard housing that utilizes a .375” (9.5 mm) wide slot, a user can specify the electrical output
parameters, choice of aperture, discrete shell material, side mount configuration, and a choice of lead spacing (for
the L Series) or 24” [610 mm] UL approved 26 AWG wire leads (W Series).
Housings are made from an opaque grade of injection-molded plastic that minimizes the assembly’s sensitivity to
visible and near-infrared ambient radiation. Discrete shells (exposed on the parallel faces inside the device throat)
are made of either IR transmissive plastic (for applications where aperture contamination may occur) or of opaque
plastic with aperture openings (for maximum protection against ambient light).
Switching of the phototransistor occurs whenever an opaque object passes through the slot and interrupts the
beam.
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for
Applications:
• Non-contact interruptive object sensing
• Assembly line automation
• Machine automation
• Equipment security
• Machine safety
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.2 10/08
Page 1 of 8
Slotted Optical Switch
OPB830 and OPB840 Series (L & W)
Absolute Maximum Ratings (TA=25°C unless otherwise noted)
Storage and Operating Temperature
L Series(1)
W Series(1)
Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron](2)
Input Diode
Forward DC Current
Peak Forward Current (1 µs pulse width, 300 pps)
Reverse DC Voltage
Power Dissipation(1)
Output Phototransistor
Collector-Emitter Voltage
Emitter-Collector Voltage
Collector DC Current
Power Dissipation(1)
-40° C to +85°C
-40° C to +80°C
260°C
50 mA
1A
2V
100 mW
30 V
5V
30 mA
100 mW
Electrical Characteristics (TA = 25°C unless otherwise noted)
SYMBOL
PARAMETER
MIN TYP MAX UNITS
TEST CONDITIONS
Input Diode LED (See OP240 for additional information—for reference only)
VF Forward Voltage
- - 1.7 V
IR Reverse Current
- - 100 µA
Output Transistor (See OP550 for additional information—for reference only)
IF = 20 mA
VR = 2 V
V(BR)CEO Collector-Emitter Breakdown Voltage 30 - - V IC = 1 mA
V(BR)ECO Emitter-Collector Breakdown Voltage 5 - - V IE = 100 µA
ICEO Collector-Emitter Dark Current
- - 100 nA VCE = 10 V
Notes:
(1) Derate linearly 1.67 mW/° C above 25° C for L Series.
(2) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.
(3) Methanol or isopropanol are recommended as cleaning agents. Plastic housing is soluble in chlorinated hydrocarbons and
ketones.
(4) The W Series includes wire terminations of 24” (610 mm) 7-strand, 26 AWG UL insulated wire on each terminal. Each device
incorporates a wire strain relief at the housing surface. The insulation functions and colors are: anode (red), cathode (black),
phototransistor collector (white) and phototransistor emitter (green).
(5) All parameters tested using pulse technique.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.2 10/08
Page 4 of 8
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
4페이지 Slotted Optical Switch
OPB830 and OPB840 Series (L & W)
OPOBP8B_37_0LN5511 -- FFllaagginNeMxidt dtoleEomf Sitltoetr
1.20
Top to Bottom
1.00
OPOBP8B_3_70LN5511--FFllaagg NNeexxttttooSSeennssoor r
1.20
Top to Bottom
1.00
0.80
Left to Right
0.60
Right to Left
0.80
Left to Right
0.60
Right to Left
0.40 0.40
0.20 0.20
0.00
0.00
0.05 0.10 0.15 0.20
Displacement Distance (inches)
0.00
0.25 0.00
0.05 0.10 0.15 0.20
Displacement Distance (inches)
0.25
OOPPBB83_7_0NL5511--FFlalaggininMMididdldeloefoSfloStlot
1.20
Top to Bottom
1.00
0.80
Left to Right
0.60
Right to Left
0.40
0.20
Top to Bottom
0
Left to Right
Emitter
Right to Left
Sensor
0 Width
0.00
0.00
0.05 0.10 0.15 0.20
Displacement Distance (inches)
0.25
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.2 10/08
Page 7 of 8
7페이지 | |||
구 성 | 총 8 페이지수 | ||
다운로드 | [ OPB840L.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
OPB840 | Slotted Optical Switch | TT |
OPB840L | Slotted Optical Switch | TT |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |