Datasheet.kr   

LS013B7DH06 데이터시트 PDF




Sharp에서 제조한 전자 부품 LS013B7DH06은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 LS013B7DH06 자료 제공

부품번호 LS013B7DH06 기능
기능 LCD Module
제조업체 Sharp
로고 Sharp 로고


LS013B7DH06 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 30 페이지수

미리보기를 사용할 수 없습니다

LS013B7DH06 데이터시트, 핀배열, 회로
www.avnet-embedded.eu




LS013B7DH06 pdf, 반도체, 판매, 대치품
SPEC No.
LD-27103A
MODEL No.
LS013B7DH06
PAGE
2
i) Contact a SHARP representative, in advance, when intending to use SHARP’s devices for
any “specific” applications other than those recommended by SHARP.
j) If any problem occurs in relation to the description of this publication, it shall be resolved through discussion with
spirit of cooperation each corporation between each corporation.
k) The ozone-depleting substances are not used.
l) The device in the production is based on RoHS instructions 95/02. And RoHS instructions materials and chlorinated
paraffin are not included intentionally.
[Handling Instructions]
Handling Precautions
(1) Treat LCD module in dustless surroundings.
(2) Be sure to turn off the power supply when remove the plugged FPC.
(3) Be careful not to give any physical stress onto the circuit of LCD module when you plug a FPC. Physical stress will
cause a break or worse connection.
(4) Do not touch or scratch the polarizer with items harder than the surface rating or permanent damage can result.
(5) Since the LCD panel is made of glass, it may break or crack if dropped or bumped on hard surface. Always handle
with care.
(6) Be careful to handle this LCD panel in order to avoid injury yourself as this panel is made of glass and have sharp
edge. When the panel is broken, do not touch the glass. Although the panel is difficult to be scattered, touching the
broken part may hurt your hands.
(7) Since a long contact with water may cause discoloration or spots, wipe it with absorbent cotton or other soft cloth
immediately.
(8) This module contains CGS. Please use appropriate anti-static protection methods for all contact with the LCD
panel and its electrical circuits.
(9) Do not expose to strong ultraviolet rays such as direct sunlight for a long time.
(10) Liquid crystal contained in the panel may leak if the LCD is broken. If LC material should accidently come in
contact with the mouth or eyes rinse with water as soon as possible, following the instructions of the appropriate
MSDS.
(11) Use N2-blower such as ionized nitrogen has anti-electrostatic when you blow dusts on Polarizer.
To clean LCD panel surface, wipe clean with absorbent cotton or soft cloth. If further cleaning is needed, use IPA
(isopropyl alcohol) and wipe clean lightly on surface only. Do not use organic solvents as it may damage the LCD
panel terminal area which uses organic material. Also, do not directly touch with finger. When the terminals
cleaning are needed, those should be wiped by a soft cloth or a cotton swab without directly touching by hand.
(12) To avoid picture uniformity failure, do not put a seal or an adhesive material on the LCD panel surface.
www.avnet-embedded.eu

4페이지










LS013B7DH06 전자부품, 판매, 대치품
SPEC No.
LD-27103A
MODEL No.
LS013B7DH06
PAGE
5
Operation Precautions
(1) Do not use polychloroprene (CR) with LCD module. It will generate chlorine gas, which will damage the
reliability of the connection part on LCD panel.
(2) Be sure to use LCD module within the recommended operating conditions. Operating module out of the
recommended range is not guaranteed even if it is in the absolute maximum rating.
(3) When handling LCD modules and assembling them into cabinets, please avoid long-term storage in the
environment of oxidization or deoxidization gas. The use of materials such as reagent, solvent, adhesive, resin,
etc. which generate these gasses, may cause corrosion and discoloration of the modules. Do not use the LCD
module under such environment.
(3) To prevent reduction in optical quality and abnormal display, avoid exposure and contamination of the LCD
panel from epoxy resin (amine system curing agent) that comes out from the material
and the packaging material used for the set side, the silicon adhesive (dealcoholization system
and oxime system), and the tray blowing agents ( azo-compound), etc.
Please confirm LCD panel compatibility with materials employed in your manufacturing and shipping processes.
(4) If stored at the temperatures lower than the rated storage temperature, the LC may freeze and it may cause
LCD panel damage. And If stored at the temperatures higher than the rated storage temperature, the LC will
lose its characteristics, and it cannot recover. Please keep it at near room temperature.
(5) Do not operate the LCD panel under outside of electrical specification. Otherwise LCD panel may be damaged.
(6) Do not use the LCD panel under outside of specified driving timing chart. Otherwise LCD panel may not have
proper picture quality.
(7) A still image should be displayed less than two hours, if it is necessary to display still image longer than two hour,
display image data must be refreshed in order to avoid sticking image on LCD panel.
(8) If LCD module takes a static electricity, as the display image which is written into pixel memory might not be
displayed, Data update should be executed frequently.
(9) It is neither a breakdown nor a defective indication though very slight change in black level might be periodically
seen in a black part on the black display image according to the source of light (angle of the luminance and the
source of light).
(10) Be sure to follow the absolute maximum rating in the specification. The design should consider the surrounding
temperature, the fluctuating input signal, and tolerance of the electronic parts. Exceeding values is possible to
cause worse characteristic such as burn and/or broken of the parts on LCD module.
(11) Follow the power, signal, and supply voltage sequence which the specification indicates, regarding on-off input
signal after power on of LCD module.
(12) According to the using application, power circuit protection is recommended at module failure.
(13) Nature of dew consideration prevention is necessary when LCD is used for long time under high-temperature
and high-humidity
www.avnet-embedded.eu

7페이지


구       성 총 30 페이지수
다운로드[ LS013B7DH06.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
LS013B7DH01

LCD Module

Sharp
Sharp
LS013B7DH03

Application Information for LCD Module

Sharp
Sharp

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵