|
|
|
부품번호 | HCPL-260L 기능 |
|
|
기능 | High Speed LVTTL Compatible 3.3 V Optocouplers | ||
제조업체 | Avago | ||
로고 | |||
전체 19 페이지수
HCPL-260L/060L/263L/063L
High Speed LVTTL Compatible 3.3 V Optocouplers
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
The HCPL-260L/060L/263L/063L are optically coupled
gates that combine a GaAsP light emitting diode and
an integrated high gain photo detector. An enable in-
put allows the detector to be strobed. The output of
the detector IC is an open collector Schottky-clamped
transistor. The internal shield provides a guaranteed
common mode transient immunity specification of
15 kV/µs at 3.3V.
This unique design provides maximum AC and DC circuit
isolation while achieving LVTTL/LVCMOS compati-bili-
ty. The optocoupler AC and DC operational parameters
are guaranteed from –40 °C to +85 °C allowing trouble-
free system performance.
These optocouplers are suitable for high speed logic
interfacing, input/output buffering, as line receivers in
environments that conventional line receivers cannot
tolerate and are recommended for use in extremely high
ground or induced noise environments.
Functional Diagram
HCPL-260L/060L
HCPL-263L/063L
NC 1
8 VCC ANODE 1 1
8 VCC
ANODE 2
7 VE CATHODE 1 2
7 VO1
CATHODE 3
6 VO CATHODE 2 3
6 VO2
NC 4 SHIELD
5 GND
Truth Table
(Positive Logic)
LED Enable Output
ON H
L
OFF H
H
ON L
H
OFF L
H
ON NC L
OFF NC H
ANODE 2 4
SHIELD
5 GND
Truth Table
(Positive Logic)
LED Output
ON L
OFF H
Features
• 3.3V/5V Dual Supply Voltages
• Low power consumption
• 15 kV/µs minimum Common Mode Rejection (CMR) at
VCM = 1000 V
• High speed: 15 MBd typical
• LVTTL/LVCMOS compatible
• Low input current capability: 5 mA
• Guaranteed AC and DC performance over tempera-
ture: –40 °C to +85 °C
• Available in 8-pin DIP, SOIC-8
• Strobable output (single channel products only)
• Safety approvals: UL, CSA, IEC/EN/DIN EN 60747-5-5
Applications
• Isolated line receiver
• Computer-peripheral interfaces
• Microprocessor system interfaces
• Digital isolation for A/D, D/A conversion
• Switching power supply
• Instrument input/output isolation
• Ground loop elimination
• Pulse transformer replacement
• Field buses
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
8-Pin DIP Package with Gull Wing Surface Mount in Option 500
(HCPL-260L, HCPL-263L)
9.65 ± 0.25
(0.380 ± 0.010)
LAND PATTERN RECOMMENDATION
1.016 (0.040)
87
65
6.350 ± 0.25
(0.250 ± 0.010)
10.9 (0.430)
1.19
(0.047)
MAX.
12
34
1.780
(0.070)
MAX.
3.56 ± 0.13
(0.140 ± 0.005)
1.27 (0.050)
9.65 ± 0.25
(0.380 ± 0.010)
7.62 ± 0.25
(0.300 ± 0.010)
1.080 ± 0.320
(0.043 ± 0.013)
2.54
(0.100)
BSC
DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARITY = 0.10 mm (0.004 INCHES).
0.635 ± 0.130
(0.025 ± 0.005)
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
0.635 ± 0.25
(0.025 ± 0.010)
2.0 (0.080)
0.254
+ 0.076
- 0.051
(0.010+- 00..000023))
12° NOM.
Small Outline SO-8 Package
(30..913575 ±± 00..102075)
8765
DEVICE PART
NUMBER
LEAD-FREE
PIN 1
•NNNN Z
YYWW
EEE
1234
TEST RATING CODE
DATE CODE
LOT ID 5.994 ± 0.203
(0.236 ± 0.008)
0.406 ± 0.076
(0.016 ± 0.003)
(10..207500)BSC
*5.080 ± 0.127
(0.200 ± 0.005)
LAND PATTERN RECOMMENDATION
7.49 (0.295)
1.9 (0.075)
0.64 (0.025)
7°
45°
X
0.432
(0.017)
3.175 ± 0.127
(0.125 ± 0.005)
1.524
(0.060)
0 ~ 7°
0.228 ± 0.025
(0.009 ± 0.001)
*
TOTAL PACKAGE LENGTH (INCLUSIVE
5.207 ± 0.254 (0.205 ± 0.010)
OF
MOLD
FLASH)
DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARITY = 0.10 mm (0.004 INCHES) MAX.
OPTION NUMBER 500 NOT MARKED.
NOTE: FLOATING LEAD PROTRUSION IS 0.15 mm (6 mils) MAX.
0.203 ± 0.102
(00..300152)MIN.(0.008 ± 0.004)
Test Rating Code, Z
L – Option x2x
V – Option x5x or x6x
Optional Identification Code
A – Avago
– UL Logo
P – Special Program Code
4
4페이지 Absolute Maximum Ratings (No Derating Required up to 85 °C)
Parameter
Symbol Package** Min. Max. Units Note
Storage Temperature
TS
–55 125 °C
Operating Temperature†
TA
–40 85 °C
Average Forward Input Current
IF
Single 8-Pin DIP
Single SO-8
20 mA
2
Dual 8-Pin DIP
Dual SO-8
15
1, 3
Reverse Input Voltage
VR 8-Pin DIP, SO-8 5 V 1
Input Power Dissipation
PI 40 mW
Supply Voltage (1 Minute Maximum)
VCC 7 V
Enable Input Voltage (Not to Exceed
VE
VCC by more than 500 mV)
Single 8-Pin DIP
Single SO-8
VCC + 0.5 V
Enable Input Current
IE 5 mA
Output Collector Current
IO 50 mA 1
Output Collector Voltage
VO 7 V 1
Output Collector Power Dissipation
PO
Single 8-Pin DIP
Single SO-8
85 mW
Dual 8-Pin DIP
Dual SO-8
60
1, 4
**Ratings apply to all devices except otherwise noted in the Package column.
Recommended Operating Conditions
Parameter
Symbol Min. Max. Units
Input Current, Low Level
IFL* 0 250 µA
Input Current, High Level[1] IFH** 5 15 mA
Power Supply Voltage
VCC 2.7 3.6 V
4.5 5.5
Low Level Enable Voltage
High Level Enable Voltage
Operating Temperature
Fan Out (at RL = 1 kΩ)[1]
Output Pull-up Resistor
VEL 0 0.8 V
VEH 2.0 VCC V
TA –40 85 °C
N
5 TTL Loads
RL
330 4 k
Ω
*The off condition can also be guaranteed by ensuring that VFL ≤ 0.8 V.
**The initial switching threshold is 5 mA or less. It is recommended that 6.3 mA to 10 mA be
used for best performance and to permit at least a 20% LED degradation guardband.
7
7페이지 | |||
구 성 | 총 19 페이지수 | ||
다운로드 | [ HCPL-260L.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
HCPL-2601 | High Speed TTL Compatible Optocouplers | HP |
HCPL-2601 | HIGH SPEED-10 MBit/s LOGIC GATE OPTOCOUPLERS | Fairchild Semiconductor |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |