|
|
|
부품번호 | MS1003SH 기능 |
|
|
기능 | Control IC | ||
제조업체 | SHINDENGEN | ||
로고 | |||
전체 30 페이지수
MS1003SH・MS1004SH
Application Note Ver.2.2
The product and product specifications are subject to change without notice.
1/41
SHINDENGEN ELECTRIC MFG. CO. , LTD
1. Overview
MS1003SH・MS1004SH
Application Note Ver.2.2
1.1 Introduction
We have developed the MS1003SH and MS1004SH to meet the growing demand for power conservation.
These ICs incorporate a super standby mode to optimize power efficiency under micro loads.
The MS1003SH and MS1004SH consume less power in standby mode than conventional ICs. The ICs
incorporate various functions to make it more user-friendly and to make it easier to design a power supply
with fewer external components.
1.2 Characteristics
1) Quasi-resonant design for high efficiency and low noise
2) Four-step soft start function (40 ms/step)
3) Onboard startup circuit requires no startup resistor, dramatically reducing losses in the startup circuit.
4) The automatic trough skip function controls increases in oscillation frequency and improves efficiency
under light loads.
5) Auto burst function improves efficiency under light loads with no additional components.
6) Super standby mode improves efficiency under micro loads.
7) Soft drive circuit reduces noise.
8) Thermal shutdown, overvoltage protection, and overload protection (timer latch)
9) Primary current limit circuit incorporates an input voltage dependence correction circuit to reduce the
number of components required.
10) Bias assist function for startup circuit
11) Vcc-GND short circuit protection function
12) SOP-8 package employed for compact dimensions
1.3 Applications
Televisions, video recorders, refrigerators, washing machines, air conditioners and other appliances in
which reduced standby power consumption is a design goal.
1.4 Appearance and dimensions
Unit: mm
4/41
SHINDENGEN ELECTRIC MFG. CO. , LTD
4페이지 3. Circuit operation
3.1 Startup
The diagram below shows the startup sequence.
MS1003SH・MS1004SH
Application Note Ver.2.2
Vin
Nc coil
backup
Off
Standby
Vcc(start)=
Vcc(stup off)=12V
Normal mode
Vcc(stop on normal)=9V
Vcc(stop normal)=8V
Vcc
On
VccUVLO
Startup
UVLO
Off On
Off On Off
On
Standby mode
Normal mode
Vcc(stup on stby)=8V
Vcc(stop stby)=12V
Startup sequence
3.1.1 Startup circuit
The startup circuit does not require a startup resistor,
making it possible to easily start the IC with a small
number of components. A schematic diagram of the
startup circuit is shown to the right.
Until the IC starts up, the startup circuit current Icc
(stup) flows from the Vin pin to the Vcc pin to charge
C, as shown in the diagram.
Startup circuit
Vin pin
Oscillation begins when the voltage at the Vcc pin
reaches Vcc (start). The startup circuit opens, and the
startup circuit current stops. The Vcc pin has hysteresis,
Vcc pin
which begins oscillating at Vcc (start) and stops
oscillating at Vcc (stop stby) or Vcc (stop normal). A
bias assist function is provided for the Vcc voltage to ensure safe startup. For more information on the bias
assist function, see Section 3.1.3.
7/41
SHINDENGEN ELECTRIC MFG. CO. , LTD
7페이지 | |||
구 성 | 총 30 페이지수 | ||
다운로드 | [ MS1003SH.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
MS1003SH | Control IC | SHINDENGEN |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |