Datasheet.kr   

5KP85A 데이터시트 PDF




Littelfuse에서 제조한 전자 부품 5KP85A은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


 

PDF 형식의 5KP85A 자료 제공

부품번호 5KP85A 기능
기능 Diode ( Transient Voltage Suppression )
제조업체 Littelfuse
로고 Littelfuse 로고


5KP85A 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 6 페이지수

미리보기를 사용할 수 없습니다

5KP85A 데이터시트, 핀배열, 회로
5KP Series
Transient Voltage Suppression Diodes
Axial Leaded – 5000W > 5KP series
RoHS
Pb e3
Uni-directional
Bi-directional
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Peak Pulse Power Dissipation by
10/1000μs Test Waveform (Fig.2)
(Note 1)
Steady State Power Dissipation on
Infinite Heat Sink at TL=75ºC
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave Unidirectional
Only (Note 2)
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional
Only (Note 3)
Operating Junction and Storage
Temperature Range
Typical Thermal Resistance
Junction to Lead
Typical Thermal Resistance
Junction to Ambient
Symbol
PPPM
PD
IFSM
VF
TJ, TSTG
RθJL
RθJA
Value
5000
8.0
400
3.5/5.0
-55 to 175
8.0
40
Unit
W
W
A
V
°C
°C/W
°C/W
Notes:
1. Non-repetitive current pulse , per Fig. 4 and derated above TJ (initial) =25OC per Fig. 3.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
3. VF < 3.5V for single die parts and VF< 5.0V for stacked-die parts.
Functional Diagram
Description
The 5KP Series is designed specifically to protect sensitive
electronic equipment from voltage transients induced by
lightning and other transient voltage events.
Features
• 5000W peak pulse
capability at 10/1000μs
waveform, repetition rate
(duty cycles):0.01%
• Glass passivated chip
junction in P600 package
• Fast response time:
typically less than 1.0ps
from 0 Volts to BV min
• Excellent clamping
capability
• Typical failure mode is
short from over-specified
voltage or current
• Whisker test is conducted
based on JEDEC
JESD201A per its table 4a
and 4c
• IEC-61000-4-2 ESD
30kV(Air), 30kV (Contact)
• E SD protection of data
lines in accordance with
IEC 61000-4-2
• E FT protection of data
lines in accordance with
IEC 61000-4-4
• Low incremental surge
resistance
TwyhpeicnaVl IBRR
less than
min>12V
2μA
• High temperature
to reflow soldering
guaranteed: 260°C/40sec
/ 0.375”, (9.5mm) lead
length, 5 lbs., (2.3kg)
tension
• Vx(αBR(1T@:+TαeTmJT=pxVeB(rTRa@Jtu-2r25e5°C))
Coefficient, typical value
is 0.1%)
• Plastic package is
flammability rated V-0 per
Underwriters Laboratories
• Matte tin lead–free plated
• Halogen free and RoHS
compliant
• Pb-free E3 means 2nd
level interconnect is
Pb-free and the terminal
finish material is tin(Sn)
(IPC/JEDEC J-STD-
Applications
TVS devices are ideal for the protection of I/O interfaces,
cVoCCmbpuustearn, dinodtuhsetrriavlualnnedracbolnescuimrcueirtseluescetrdoninictealpepcloicmat,ions.
Additional Infomarion
Cathode
Bi-directional
Uni-directional
Anode
Datasheet
Resources
Samples
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/20/15




5KP85A pdf, 반도체, 판매, 대치품
Transient Voltage Suppression Diodes
Axial Leaded – 5000W > 5KP series
Ratings and Characteristic Curves (TA=25°C unless otherwise noted) (Continued)
Figure 3 - Peak Pulse Power Derating Curve
Figure 4 - Pulse Waveform
100
75
50
25
0
0 25 50 75 100 125 150 175 200
TJ - Initial Junction Temperature (ºC)
150
100
50
tr=10µsec
Peak Value
IPPM
TJ=25°C
Pulse Width(td) is defined
as the point where the peak
current decays to 50% of IPPM
( )Half Value
IPPM
IPPM
2
10/1000µsec. Waveform
as defined by R.E.A
0
0
td
1.0
2.0
t-Time (ms)
3.0
4.0
Figure 5 - Typical Junction Capacitance
100000
10000
1000
100
10
Uni-direcƟonal V=0V
Uni-direcƟonal V=VR
Bi-direcƟonal V=0V
Bi-direcƟonal V=VR
1
1 10 100
VBR - Reverse Breakdown Voltage (V)
1000
Figure 7 - Maximum Non-Repetitive Peak Forward
Surge Current Uni-Directional Only
500
450
400
350
300
250
200
150
100
50
0
1
10
Number of Cycles at 60 Hz
100
Figure 6 - Typical Transient Thermal Impedance
100
10
1
0.1
0.01
0.1 1 10 100 1000
TP - Pulse Duration (s)
Figure 8 - Peak Forward Voltage Drop vs Peak Forward
Current (Typical Values)
100 Single die
10 Stacked-die
1
0.1
0.01
0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
VF-Peak Forward Voltage(V)
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/20/15

4페이지












구       성 총 6 페이지수
다운로드[ 5KP85A.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
5KP85

Zener Diode ( Rectifier )

Microsemi Corporation
Microsemi Corporation
5KP85

TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR

General Semiconductor
General Semiconductor

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵