|
|
PDF SMBJ70A Data sheet ( Hoja de datos )
| Número de pieza | SMBJ70A | |
| Descripción | TVS Diode (Transient Voltage Suppressor) | |
| Fabricantes | Galaxy Microelectronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SMBJ70A (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
Production specification
TRANSIENT VOLTAGE SUPPRESSOR
SMBJ5.0A--SMBJ188CA
FEATURES
z Glass passivated junction
z Low incremental surge resistance, excellent clamping capability
z Low profile package with built-in strain relief for surface mounted applications
z 600W peak pulse power capability with a 10/1000μs
Wave form, repetition rate (duty cycle): 0.01%
z Very fast response time
z High temperature soldering guaranteed: 250°C/10 seconds at terminals
MECHANICAL DATA
z Case: JEDEC DO-214AA molded plastic over passivated chip
z Terminals: solder plated, solderable per MIL-STD-750, method 2026
z Polarity: foruni-directional types the color band denotes the cathode, which is postitive with respect to the
anode under normal TVS operation
Devices for Bidirectional Applications
For bi-directional devices, use suffix C or CA (e.g. SMBJ10C, SMBJ10CA). Electrical characteristics apply in both
directions.
Maximum Ratings and Thermal Characteristics (TA=25℃ unless otherwise noted)
Characteristic
Symbol
Value
Peak power dissipation with a 10/1000μs waveform
(NOTE 1,2, FIG.1)
PPPM
Minimum 600
Peak pulse current with a 10/1000μs waveform (NOTE 1)
IPPM See Table Below
Unit
W
A
Typical thermal resistance, junction to ambient ( (NOTE 2)
Peak forward surge current, 8.3ms single half sine-wave uni-directional
only (NOTE 3)
R θ JA
IFSM
100.0
100.0
℃/W
A
Typical thermal resistance, junction to lead
R θJL
20 ℃/W
Operating junction and storage temperature range
TJ, TSTG
NOTES: (1) Non-repetitive current pules, per Fig. 3 and derated above TA=25 per Fig. 2.
(2) Mounted on minimum recommended pad layout.
(3) Mounted on 0.2 x 0.2" (5.0 x 5.0mm) copper pads to each terminal.
-55---+150
℃
Document Number: SMB601AB
www.gmicroelec.com
1
1 page  
TRANSIENT VOLTAGE SUPPRESSOR
PACKAGE OUTLINE DIMENSIONS
A
D
F
Production specification
SMBJ5.0A--SMBJ188CA
DO-214AA（SMB）
Dim Min Max
A 4.30 4.70
B 3.30 3.70
C 2.00 2.30
D 5.05 5.55
E 0.10 0.30
F 0.95 1.55
G 0.20MAX
H 2.10 2.50
I 1.85 2.15
All Dimensions in mm
SOLDERING FOOTPRINT
Unit ：mm
PACKAGE INFORMATION
Device
Package
Shipping
SMBJ5.0A-SMBJ188CA DO-214AA(SMB) 3000/Tape&Reel
Document Number: SMB601AB
www.gmicroelec.com
5
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet SMBJ70A.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SMBJ70 | TVS Diode ( Rectifier ) |  DEC |
| SMBJ70 | TVS Diode, SMD (Transient Voltage Suppressor) |  Jinan Gude Electronic Device |
| SMBJ70 | UNI- AMD BI-DIRECTIONAL SURFACE MOUNT |  Microsemi Corporation |
| SMBJ70 | SURFACE MOUNT TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR |  General Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |