DataSheet.es    


PDF MCR106-6 Data sheet ( Hoja de datos )

Número de pieza MCR106-6
Descripción Sensitive Gate Silicon Controlled Rectifiers
Fabricantes Littelfuse 
Logotipo Littelfuse Logotipo



Hay una vista previa y un enlace de descarga de MCR106-6 (archivo pdf) en la parte inferior de esta página.


Total 4 Páginas

No Preview Available ! MCR106-6 Hoja de datos, Descripción, Manual

MCR106-6, MCR106-8
Preferred Device
Sensitive Gate Silicon
Controlled Rectifiers
Reverse Blocking Thyristors
PNPN devices designed for high volume consumer applications
such as temperature, light and speed control; process and remote control,
and warning systems where reliability of operation is important.
Features
Glass-Passivated Surface for Reliability and Uniformity
Power Rated at Economical Prices
Practical Level Triggering and Holding Characteristics
Flat, Rugged, Thermopad Construction for Low Thermal Resistance,
High Heat Dissipation and Durability
PbFree Packages are Available
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
Peak Repetitive OffState Voltage (Note 1)
(TJ = 40 to 110°C, Sine Wave 50 to 60
Hz, RGK = 1 kW) MCR1066
MCR1068
VDRM,
VRRM
400
600
V
(O1n8-0S°taCtoenRdMucStioCnuArrnegnlte, s(T) C = 93°C)
IT(RMS)
4.0
A
Average OnState Current,
(180° Conduction Angles; TC = 93°C)
IT(AV)
2.55
A
Peak Non-repetitive Surge Current
(1/2 Cycle, Sine Wave 60 Hz, TJ = 110°C)
Circuit Fusing Considerations, (t = 8.3 ms)
ITSM
I2t
25 A
2.6 A2s
Forward Peak Gate Power,
(TC = 93°C, Pulse Width v 1.0 ms)
PGM 0.5 W
Forward Average Gate Power,
(TC = 93°C, t = 8.3 ms)
PG(AV)
0.1
W
Forward Peak Gate Current,
(TC = 93°C, Pulse Width v 1.0 ms)
IGM 0.2 A
Peak Reverse Gate Voltage,
(TC = 93°C, Pulse Width v 1.0 ms)
Operating Junction Temperature Range
Storage Temperature Range
Mounting Torque (Note 2)
VRGM
6.0
V
TJ 40 to +110 °C
Tstg 40 to +150 °C
6.0 in. lb.
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1.
aVpDpRlMy
faonr dzeVrRoRoMr
for all types can be applied on a
negative gate voltage; however,
continuous basis. Ratings
positive gate voltage shall
not be applied concurrent with negative potential on the anode. Blocking
voltages shall not be tested with a constant current source such that the
voltage ratings of the devices are exceeded.
2. Torque rating applies with use of compression washer (B52200-F006 or
equivalent). Mounting torque in excess of 6 in. lb. does not appreciably lower
case-to-sink thermal resistance. Anode lead and heatsink contact pad are
common. (See AN209B). For soldering purposes (either terminal connection
or device mounting), soldering temperatures shall not exceed +200°C. For
optimum results, an activated flux (oxide removing) is recommended.
Littelfuse.com
SCRs
4 AMPERES RMS
400 thru 600 VOLTS
G
AK
32 1
TO225AA
CASE 77
STYLE 2
MARKING DIAGRAM
YWW
CR
106xG
Y = Year
WW = Work Week
CR106x = Device Code
x = 6 or 8
G = PbFree Package
PIN ASSIGNMENT
1 Cathode
2 Anode
3 Gate
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
Preferred devices are recommended choices for future use
and best overall value.
Specifications subject to change without notice. © 2016 Littelfuse, Inc.
September 19, 2016 − Rev. 5
1
Publication Order Number:
MCR106/D

1 page





PáginasTotal 4 Páginas
PDF Descargar[ Datasheet MCR106-6.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
MCR106-1SILICON CONTROLLED RECTIFIERSDigitron Semiconductors
Digitron Semiconductors
MCR106-2Silicon Controlled RectifiersMotorola Semiconductors
Motorola Semiconductors
MCR106-2SILICON CONTROLLED RECTIFIERSDigitron Semiconductors
Digitron Semiconductors
MCR106-3Silicon Controlled RectifiersMotorola Semiconductors
Motorola Semiconductors

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar