Datasheet.kr   

MCR106-8 데이터시트 PDF




Littelfuse에서 제조한 전자 부품 MCR106-8은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


 

PDF 형식의 MCR106-8 자료 제공

부품번호 MCR106-8 기능
기능 Sensitive Gate Silicon Controlled Rectifiers
제조업체 Littelfuse
로고 Littelfuse 로고


MCR106-8 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 4 페이지수

미리보기를 사용할 수 없습니다

MCR106-8 데이터시트, 핀배열, 회로
MCR106-6, MCR106-8
Preferred Device
Sensitive Gate Silicon
Controlled Rectifiers
Reverse Blocking Thyristors
PNPN devices designed for high volume consumer applications
such as temperature, light and speed control; process and remote control,
and warning systems where reliability of operation is important.
Features
Glass-Passivated Surface for Reliability and Uniformity
Power Rated at Economical Prices
Practical Level Triggering and Holding Characteristics
Flat, Rugged, Thermopad Construction for Low Thermal Resistance,
High Heat Dissipation and Durability
PbFree Packages are Available
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
Peak Repetitive OffState Voltage (Note 1)
(TJ = 40 to 110°C, Sine Wave 50 to 60
Hz, RGK = 1 kW) MCR1066
MCR1068
VDRM,
VRRM
400
600
V
(O1n8-0S°taCtoenRdMucStioCnuArrnegnlte, s(T) C = 93°C)
IT(RMS)
4.0
A
Average OnState Current,
(180° Conduction Angles; TC = 93°C)
IT(AV)
2.55
A
Peak Non-repetitive Surge Current
(1/2 Cycle, Sine Wave 60 Hz, TJ = 110°C)
Circuit Fusing Considerations, (t = 8.3 ms)
ITSM
I2t
25 A
2.6 A2s
Forward Peak Gate Power,
(TC = 93°C, Pulse Width v 1.0 ms)
PGM 0.5 W
Forward Average Gate Power,
(TC = 93°C, t = 8.3 ms)
PG(AV)
0.1
W
Forward Peak Gate Current,
(TC = 93°C, Pulse Width v 1.0 ms)
IGM 0.2 A
Peak Reverse Gate Voltage,
(TC = 93°C, Pulse Width v 1.0 ms)
Operating Junction Temperature Range
Storage Temperature Range
Mounting Torque (Note 2)
VRGM
6.0
V
TJ 40 to +110 °C
Tstg 40 to +150 °C
6.0 in. lb.
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1.
aVpDpRlMy
faonr dzeVrRoRoMr
for all types can be applied on a
negative gate voltage; however,
continuous basis. Ratings
positive gate voltage shall
not be applied concurrent with negative potential on the anode. Blocking
voltages shall not be tested with a constant current source such that the
voltage ratings of the devices are exceeded.
2. Torque rating applies with use of compression washer (B52200-F006 or
equivalent). Mounting torque in excess of 6 in. lb. does not appreciably lower
case-to-sink thermal resistance. Anode lead and heatsink contact pad are
common. (See AN209B). For soldering purposes (either terminal connection
or device mounting), soldering temperatures shall not exceed +200°C. For
optimum results, an activated flux (oxide removing) is recommended.
Littelfuse.com
SCRs
4 AMPERES RMS
400 thru 600 VOLTS
G
AK
32 1
TO225AA
CASE 77
STYLE 2
MARKING DIAGRAM
YWW
CR
106xG
Y = Year
WW = Work Week
CR106x = Device Code
x = 6 or 8
G = PbFree Package
PIN ASSIGNMENT
1 Cathode
2 Anode
3 Gate
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
Preferred devices are recommended choices for future use
and best overall value.
Specifications subject to change without notice. © 2016 Littelfuse, Inc.
September 19, 2016 − Rev. 5
1
Publication Order Number:
MCR106/D




MCR106-8 pdf, 반도체, 판매, 대치품
MCR1066, MCR1068
Q
H
PACKAGE DIMENSIONS
B
U
F
123
A
M
K
TO225
CASE 7709
ISSUE Z
C
VJ
GR
S 0.25 (0.010) M A M B M
D 2 PL
0.25 (0.010) M A M B M
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. 077-01 THRU -08 OBSOLETE, NEW STANDARD
077-09.
INCHES
DIM MIN MAX
A 0.425 0.435
B 0.295 0.305
C 0.095 0.105
D 0.020 0.026
F 0.115 0.130
G 0.094 BSC
H 0.050 0.095
J 0.015 0.025
K 0.575 0.655
M 5_ TYP
Q 0.148 0.158
R 0.045 0.065
S 0.025 0.035
U 0.145 0.155
V 0.040 ---
STYLE 2:
PIN 1.
2.
3.
CATHODE
ANODE
GATE
MILLIMETERS
MIN MAX
10.80 11.04
7.50 7.74
2.42 2.66
0.51 0.66
2.93 3.30
2.39 BSC
1.27 2.41
0.39 0.63
14.61 16.63
5_ TYP
3.76 4.01
1.15 1.65
0.64 0.88
3.69 3.93
1.02 ---
Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, automotive, military,
aerospace, medical, life-saving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or
any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property
damage) other than those expressly set forth in applicable Littelfuse product documentation.  Warranties granted by Littelfuse shall be
deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation.  Littelfuse shall not be
liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in
applicable Littelfuse documentation.  The sale and use of Littelfuse products is subject to Littelfuse Terms and Conditions of Sale,
unless otherwise agreed by Littelfuse.
Littelfuse.com
Specifications subject to change without notice. © 2016 Littelfuse, Inc.
September 19, 2016 − Rev. 5
4
Publication Order Number:
MCR106/D

4페이지












구       성 총 4 페이지수
다운로드[ MCR106-8.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
MCR106-1

SILICON CONTROLLED RECTIFIERS

Digitron Semiconductors
Digitron Semiconductors
MCR106-2

Silicon Controlled Rectifiers

Motorola Semiconductors
Motorola Semiconductors

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵