|
|
PDF MCR12M Data sheet ( Hoja de datos )
| Número de pieza | MCR12M | |
| Descripción | SILICON CONTROLLED RECTIFIERS | |
| Fabricantes | Digitron Semiconductors | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MCR12M (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
MCR12D, MCR12M,
MCR12N
High-reliability discrete products
and engineering services since 1977
SILICON CONTROLLED RECTIFIERS
FEATURES
Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.
Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix.
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Peak repetitive off-state voltage(1)
Peak repetitive reverse voltage
(TJ = -40 to +125°C)
MCR12D
MCR12M
MCR12N
VDRM
VRRM
400
600
800
V
On-state RMS current (all conduction angles)
IT(RMS)
12
A
Peak non-repetitive surge current
(one half-cycle, sine wave, 60Hz, TJ = 125°C)
Circuit fusing consideration (t = 8.3ms)
ITSM 100
A
I2t 41 A2s
Peak gate power (pulse width ≤ 1.0µs, TC = 80°C)
PGM 5
W
Average gate power (t = 8.3ms, TC = 80°C)
Peak gate current (pulse width ≤ 1.0µs, TC = 80°C)
PG(AV)
IGM
0.5
2
W
A
Operating temperature range
TJ -40 to +125 °C
Storage temperature range
Tstg -40 to +150
°C
Note 1: VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; positive gate voltage shall not be applied concurrent with negative
potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded.
THERMAL CHARACTERISTICS
Characteristic
Thermal resistance, junction to case
Thermal resistance, junction to ambient
Maximum lead temperature for soldering purposes
1/8” from case for 10s
Symbol
RӨJC
RӨJA
TL
Maximum
2.0
62.5
260
Unit
°C/W
°C/W
°C
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified)
Characteristic
Symbol
OFF CHARACTERISTICS
Peak forward blocking current
Peak reverse blocking current
(VAK = Rated VDRM or VRRM, gate open)
TJ = 25°C
TJ = 125°C
ON CHARACTERISTICS
IDRM,
IRRM
Peak on-state voltage*
(ITM = 24A)
Gate trigger current (continuous dc)
(VD = 12V, RL = 100Ω)
VTM
IGT
Min Typ Max Unit
mA
- - 0.01
- - 2.0
- - 2.2 V
2.0 7.0 20
mA
Rev. 20130108
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet MCR12M.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MCR12 | Silicon Controlled Rectifiers |  Motorola Semiconductors |
| MCR12D | SILICON CONTROLLED RECTIFIERS | Digitron Semiconductors |
| MCR12D | SILICON CONTROLLED RECTIFIERS | Motorola Semiconductors |
| MCR12D | Silicon Controlled Rectifiers |  ON |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |