|
|
Número de pieza | ePS5005 | |
Descripción | RISC II Series Microcontroller | |
Fabricantes | ELAN Microelectronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ePS5005 (archivo pdf) en la parte inferior de esta página. Total 18 Páginas | ||
No Preview Available ! ePS5005
RISC II Series
Microcontroller
Product
Specification
DOC. VERSION 1.0
ELAN MICROELECTRONICS CORP.
November 2010
1 page ePS5005
RISC II Series Microcontroller
1 General Description
The ePS5005 is an 8-bit RISC MCU embedded with an 11×60 LCD driver along with
two 8-bit timers, one 16-bit general timer, and a watchdog timer. It also has on-chip
512 bytes RAM and 16K words program ROM. It is highly ideal for advance scientific
calculator application, particularly those requiring high performance and low cost
solution.
The MCU core is one of ELAN’s second generation RISC based IC’s, known as RISC II
(RII) series. The core was specifically designed for low power and portable device
applications. The ePS5005 also supports Fast, Slow and Idle modes, as well as Sleep
mode to enhance its low power consumption features.
IMPORTANT NOTES !
■ Do not use Register BSR (05h) Bit 7 ~ Bit 3.
■ Do not use Register BSR1 (07h) Bit 7 ~ Bit 3.
■ Check the range of BSR (05h) and BSR1 (07h) are only 0x00~0x03.
■ Do not use LCD RAM 3Ch ~ 3Fh.
■ Do not use Registers JDNZ at FSR1 (04h) special register.
2 Features
MCU
8 bit RISC MCU
Operating voltage: 1.2V ~ 1.8V
Clock Source: Dual system clock
• Low-frequency: 32kHz Internal RC oscillator / External RC oscillator /
Crystal oscillator
• High-frequency: 200kHz / 300kHz / 500kHz External RC oscillator
One Instruction cycle time = 2 × System clock time
Program ROM addressing: 16K words max.
128 bytes un-banked RAM and Working RAM
128 bytes un-banked RAM including special registers and common registers
4×128 bytes banked RAM
32-level RAM stack
Lookup Table function is fast and efficient when combined with Repeat instruction
Product Specification (V1.0) 11.03.2010
(This specification is subject to change without further notice)
•1
5 Page ePS5005
RISC II Series Microcontroller
Port C.1 control bit (SEG45):
• Select “LCD segment signal output” or “general I/O function”
Port C.2 control bit (SEG46):
• Select “LCD segment signal output” or “general I/O function”
Port C.3 control bit (SEG47):
• Select “LCD segment signal output” or “general I/O function”
Port C.4 control bit (SEG48):
• Select “LCD segment signal output” or “general I/O function”
Port C.5 control bit (SEG49):
• Select “LCD segment signal output” or “general I/O function”
Port C.6 control bit (SEG50):
• Select “LCD segment signal output” or “general I/O function”
Port C.7 control bit (SEG51):
• Select “LCD segment signal output” or “general I/O function”
Product Specification (V1.0) 11.03.2010
(This specification is subject to change without further notice)
•7
11 Page |
Páginas | Total 18 Páginas | |
PDF Descargar | [ Datasheet ePS5005.PDF ] |
Número de pieza | Descripción | Fabricantes |
ePS5001 | RISC II Series Microcontroller | ELAN Microelectronics |
ePS5002 | RISC II Series Microcontroller | ELAN Microelectronics |
ePS5005 | RISC II Series Microcontroller | ELAN Microelectronics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |