Datasheet.kr   

BZA109TS PDF 데이터시트 : 부품 기능 및 핀배열

부품번호 BZA109TS
기능 9-fold ESD Transient Suppressor
제조업체 NXP
로고 NXP 로고 



전체 12 페이지

		

No Preview Available !

BZA109TS 데이터시트, 핀배열, 회로
DISCRETE SEMICONDUCTORS
DATA SHEET
M3D370
BZA109TS
9-fold ESD Transient Suppressor
Preliminary specification
File under Discrete Semiconductors, SC01
1997 Sep 08




BZA109TS pdf, 반도체, 판매, 대치품
Philips Semiconductors
9-fold ESD Transient Suppressor
Preliminary specification
BZA109TS
10
IZSM
(A)
2
Ptot
( W)
1.5
1
0.5
1
0.1
1 10
tp (ms)
Fig.3 Maximum non-repetitive peak reverse
current as a function of the pulse time.
0
0 50 100 150 200
TS (°C)
All diodes loaded.
Fig.4 Power derating curve.
100
PZSM
( W)
10
150
CD
(pF)
100
50
1
0.1
1 10
tp (ms)
PZSM = VZSM x IZSM;
VZSM is the non-repetitive peak reverse voltage at IZSM.
Fig.5 Maximum non-repetitive peak reverse
power dissipation as a function of the
pulse duration (square pulse).
0
0123456
VZ (V)
Tj = 25 °C; f = 1 MHz.
Fig.6 Diode capacitance as a function of the
working voltage; typical values.
1997 Sep 08
4

4페이지










BZA109TS 전자부품, 판매, 대치품
Philips Semiconductors
9-fold ESD Transient Suppressor
Preliminary specification
BZA109TS
DEVICE PLACEMENT AND PRINTED-CIRCUIT BOARD LAYOUT
Circuit board layout is of extreme importance in the suppression of transients. The clamping voltage of the BZA109TS is
determined by the peak transient current and the rate of rise of that current (di/dt). Since parasitic inductances can further
add to the clamping voltage (V = L di/dt) the printed-circuit board layout should use minimal series conductor lengths.
This includes the lead length of the suppression element.
In addition to minimizing conductor length the following printed-circuit board layout guidelines are recommended:
1. Place the suppression element in the area of the input terminals or connectors.
2. Reduce parallel signal paths.
3. Avoid running protection conductors in parallel with unprotected conductors.
4. Minimize all printed-circuit board loop areas including power and ground loops.
5. Minimize the length of the transient return path to ground.
6. Avoid using shared transient return paths to a common ground point.
1997 Sep 08
7

7페이지



구       성총 12 페이지
다운로드[ BZA109TS.PDF 데이터시트 ]
구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

휴대전화 : 010-3582-2743


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877, [ 홈페이지 ]



링크공유

링크 :

관련 데이터시트

부품번호상세설명 및 기능제조사
BZA109TS

9-fold ESD Transient Suppressor

NXP
NXP

DataSheet.kr    |   2019   |  연락처   |  링크모음   |   검색  |   사이트맵