Datasheet.kr   

BT148W-500R 데이터시트 PDF




NXP Semiconductors에서 제조한 전자 부품 BT148W-500R은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


 

PDF 형식의 BT148W-500R 자료 제공

부품번호 BT148W-500R 기능
기능 Thyristors logic level
제조업체 NXP Semiconductors
로고 NXP Semiconductors 로고


BT148W-500R 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 7 페이지수

미리보기를 사용할 수 없습니다

BT148W-500R 데이터시트, 핀배열, 회로
Philips Semiconductors
Thyristors
logic level
Product specification
BT148W series
GENERAL DESCRIPTION
Glass passivated, sensitive gate
thyristors in a plastic envelope
suitable for surface mounting,
intended for use in general purpose
switching and phase control
applications. These devices are
intended to be interfaced directly to
microcontrollers, logic integrated
circuits and other low power gate
trigger circuits.
QUICK REFERENCE DATA
SYMBOL PARAMETER
MAX. MAX. MAX. UNIT
VDRM,
VRRM
IT(AV)
IT(RMS)
ITSM
BT148W-
Repetitive peak off-state
voltages
Average on-state current
RMS on-state current
Non-repetitive peak on-state
current
400R 500R 600R
400 500 600
0.6 0.6 0.6
111
10 10 10
V
A
A
A
PINNING - SOT223
PIN DESCRIPTION
1 cathode
2 anode
3 gate
tab anode
PIN CONFIGURATION
4
123
SYMBOL
a
k
g
LIMITING VALUES
Limiting values in accordance with the Absolute Maximum System (IEC 134).
SYMBOL PARAMETER
CONDITIONS
MIN.
VDRM, VRRM Repetitive peak off-state
voltages
IT(AV)
IT(RMS)
ITSM
I2t
dIT/dt
IGM
VGM
VRGM
PGM
PG(AV)
Tstg
Tj
Average on-state current half sine wave; Tsp 112 ˚C
RMS on-state current
all conduction angles
Non-repetitive peak
on-state current
half sine wave; Tj = 25 ˚C prior to
surge
t = 10 ms
t = 8.3 ms
I2t for fusing
t = 10 ms
Repetitive rate of rise of
on-state current after
triggering
ITM = 4 A; IG = 200 mA;
dIG/dt = 200 mA/µs
Peak gate current
Peak gate voltage
Peak reverse gate voltage
Peak gate power
Average gate power
over any 20 ms period
Storage temperature
Operating junction
temperature
-
-
-
-
-
-
-
-
-
-
-
-
-40
-
MAX.
-400R -500R -600R
4001 5001 6001
0.6
1
10
11
0.5
50
1
5
5
1.2
0.12
150
1252
UNIT
V
A
A
A
A
A2s
A/µs
A
V
V
W
W
˚C
˚C
1 Although not recommended, off-state voltages up to 800V may be applied without damage, but the thyristor may
switch to the on-state. The rate of rise of current should not exceed 15 A/µs.
2 Note: Operation above 110˚C may require the use of a gate to cathode resistor of 1kor less.
October 1997
1
Rev 1.300




BT148W-500R pdf, 반도체, 판매, 대치품
Philips Semiconductors
Thyristors
logic level
Product specification
BT148W series
IGT(Tj)
IGT(25 C)
3
BT148
2.5
2
1.5
1
0.5
0
-50 0
50 100 150
Tj / C
Fig.7. Normalised gate trigger current
IGT(Tj)/ IGT(25˚C), versus junction temperature Tj.
IL(Tj)
IL(25 C)
3
BT145
2.5
2
1.5
1
0.5
0
-50
Fig.8.
0 50 100 150
Tj / C
Normalised latching current IL(Tj)/ IL(25˚C),
versus junction temperature Tj.
IH(Tj)
IH(25 C)
3
BT145
2.5
2
1.5
1
0.5
0
-50
Fig.9.
0 50 100 150
Tj / C
Normalised holding current IH(Tj)/ IH(25˚C),
versus junction temperature Tj.
5 IT / A
Tj = 125 C
Tj = 25 C
4 Vo = 1.107 V
Rs = 0.14 Ohms
3
2
BT148W
typ max
1
0
0 0.5 1 1.5 2 2.5
VT / V
Fig.10. Typical and maximum on-state characteristic.
100 Zth j-sp (K/W)
BT148W
10
1
P
D
tp
0.1
t
0.01
10us 0.1ms 1ms 10ms 0.1s 1s 10s
tp / s
Fig.11. Transient thermal impedance Zth j-sp, versus
pulse width tp.
1000 dVD/dt (V/us)
100
RGK = 100 ohms
10
1
0 50 100 150
Tj / C
Fig.12. Typical, critical rate of rise of off-state voltage,
dVD/dt versus junction temperature Tj.
October 1997
4
Rev 1.300

4페이지










BT148W-500R 전자부품, 판매, 대치품
Philips Semiconductors
Thyristors
logic level
Product specification
BT148W series
DEFINITIONS
Data sheet status
Objective specification This data sheet contains target or goal specifications for product development.
Preliminary specification This data sheet contains preliminary data; supplementary data may be published later.
Product specification This data sheet contains final product specifications.
Limiting values
Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and
operation of the device at these or at any other conditions above those given in the Characteristics sections of
this specification is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
© Philips Electronics N.V. 1997
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the
copyright owner.
The information presented in this document does not form part of any quotation or contract, it is believed to be
accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any
consequence of its use. Publication thereof does not convey nor imply any license under patent or other
industrial or intellectual property rights.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices or systems where malfunction of these
products can be reasonably expected to result in personal injury. Philips customers using or selling these products
for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting
from such improper use or sale.
October 1997
7
Rev 1.300

7페이지


구       성 총 7 페이지수
다운로드[ BT148W-500R.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
BT148W-500R

Thyristors logic level

NXP Semiconductors
NXP Semiconductors

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵