Datasheet.kr   

BRT12-H PDF 데이터시트 : 부품 기능 및 핀배열

부품번호 BRT12-H
기능 Optocoupler/ Phototriac Output
제조업체 Vishay Siliconix
로고 Vishay Siliconix 로고 


전체 7 페이지

		

No Preview Available !

BRT12-H 데이터시트, 핀배열, 회로
VISHAY
Optocoupler, Phototriac Output
BRT11/ 12/ 13
Vishay Semiconductors
Features
• ITRMS = 300 mA
• High Static dVcrq/dt < 10,000 V/µs
• Electrically Insulated between Input and output cir-
cuit
• Microcomputer compatible - Very Low Trigger
Current
• Non-zero voltage detectors High input Sensitivity
A1
C2
NC 3
6 MT2
5 NC
4 MT1
Agency Approvals
• UL - File No. E52744 System Code J
i179041
• DIN EN 60747-5-2(VDE0884)
DIN EN 60747-5-5 pending
Available with Option 1
Applications
Industrial controls
Office equipment
Consumer appliances
Description
The BRT11/12/13 are AC optocouplers non-zero volt-
age detectors consisting of two electrically insulated
lateral power ICs which integrate a thyristor system, a
photo detector and noise suppression at the output
and an IR GaAs diode input.
Order Information
Part
BRT11-H
BRT12-H
BRT13-H
BRT11-M
BRT12-M
BRT13-M
BRT12-H-X006
BRT12-H-X007
BRT12-H-X009
BRT13-H-X006
BRT13-H-X007
BRT13-H-X009
BRT12-M-X006
Remarks
400 V VDRM, 2 mA IFT, DIP-6
600 V VDRM, 2 mA IFT, DIP-6
800 V VDRM, 2 mA IFT, DIP-6
400 V VDRM, 3 mA IFT, DIP-6
600 V VDRM, 3 mA IFT, DIP-6
800 V VDRM, 3 mA IFT, DIP-6
600 V VDRM, 2 mA IFT, DIP-6 400 mil
(option 6)
600 V VDRM, 2 mA IFT, SMD-6 (option 7)
600 V VDRM, 2 mA IFT, SMD-6 (option 9)
800 V VDRM, 2 mA IFT, DIP-6 400 mil
(option 6)
800 V VDRM, 2 mA IFT, SMD-6 (option 7)
800 V VDRM, 2 mA IFT, SMD-6 (option 9)
600 V VDRM, 3 mA IFT, DIP-6 400 mil
(option 6)
For additional information on the available options refer to
Option Information.
Document Number 83689
Rev. 1.4, 26-Apr-04
www.vishay.com
1




BRT12-H pdf, 반도체, 판매, 대치품
BRT11/ 12/ 13
Vishay Semiconductors
Typical Characteristics (Tamb = 25 °C unless otherwise specified)
VISHAY
tgd=f(IF/IFT25°C)
VD=200V
IFTN=f(tpIF)
IFTN normalized to IFT refering
to tpIF 1 m
Vop=220V,f= 4 0 ...60Hz typ.
17239
Fig. 1 Typical Trigger Delay Time
Ptot= (ITRMS)
17242
Fig. 4 Pulse Trigger Current
IF = ƒ(VF)
17240
Fig. 2 Power Dissipation 40 to 60 Hz Line Operation
ID=f(Tj)
VD=800V
17243
Fig. 5 Typical Input Characteristics
IT = ƒ(VT)
17241
Fig. 3 Typical Off-State Current
www.vishay.com
4
17244
Fig. 6 Typical Output Characteristics
Document Number 83689
Rev. 1.4, 26-Apr-04

4페이지










BRT12-H 전자부품, 판매, 대치품
VISHAY
BRT11/ 12/ 13
Vishay Semiconductors
Ozone Depleting Substances Policy Statement
It is the policy of Vishay Semiconductor GmbH to
1. Meet all present and future national and international statutory requirements.
2. Regularly and continuously improve the performance of our products, processes, distribution and
operatingsystems with respect to their impact on the health and safety of our employees and the public, as
well as their impact on the environment.
It is particular concern to control or eliminate releases of those substances into the atmosphere which are
known as ozone depleting substances (ODSs).
The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs
and forbid their use within the next ten years. Various national and international initiatives are pressing for an
earlier ban on these substances.
Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the
use of ODSs listed in the following documents.
1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments
respectively
2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental
Protection Agency (EPA) in the USA
3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively.
Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting
substances and do not contain such substances.
We reserve the right to make changes to improve technical design
and may do so without further notice.
Parameters can vary in different applications. All operating parameters must be validated for each
customer application by the customer. Should the buyer use Vishay Semiconductors products for any
unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all
claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal
damage, injury or death associated with such unintended or unauthorized use.
Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany
Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423
Document Number 83689
Rev. 1.4, 26-Apr-04
www.vishay.com
7

7페이지



구       성총 7 페이지
다운로드[ BRT12-H.PDF 데이터시트 ]
구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

휴대전화 : 010-3582-2743


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877, [ 홈페이지 ]



링크공유

링크 :

관련 데이터시트

부품번호상세설명 및 기능제조사
BRT12-H

Optocoupler/ Phototriac Output

Vishay Siliconix
Vishay Siliconix
BRT12-H-X006

Optocoupler/ Phototriac Output

Vishay Siliconix
Vishay Siliconix

DataSheet.kr    |   2019   |  연락처   |  링크모음   |   검색  |   사이트맵