|
|
PDF BPW96B Data sheet ( Hoja de datos )
| Número de pieza | BPW96B | |
| Descripción | Silicon NPN Phototransistor | |
| Fabricantes | Vishay Telefunken | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de BPW96B (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
www.vishay.com
BPW96B, BPW96C
Vishay Semiconductors
Silicon NPN Phototransistor
94 8391
DESCRIPTION
BPW96 is a silicon NPN phototransistor with high radiant
sensitivity in clear, T-1¾ plastic package. It is sensitive to
visible and near infrared radiation.
FEATURES
• Package type: leaded
• Package form: T-1¾
• Dimensions (in mm): Ø 5
• Leads with stand-off
• High photo sensitivity
• High radiant sensitivity
• Suitable for visible and near infrared radiation
• Fast response times
• Angle of half sensitivity: ϕ = ± 20°
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
Note
** Please see document “Vishay Material Category Policy”:
www.vishay.com/doc?99902
APPLICATIONS
• Detector in electronic control and drive circuits
PRODUCT SUMMARY
COMPONENT
BPW96B
BPW96C
Ica (mA)
2.5 to 7.5
4.5 to 15
Note
• Test condition see table “Basic Characteristics”
ϕ (deg)
± 20
± 20
λ0.1 (nm)
450 to 1080
450 to 1080
ORDERING INFORMATION
ORDERING CODE
BPW96B
BPW96C
Note
• MOQ: minimum order quantity
PACKAGING
Bulk
Bulk
REMARKS
MOQ: 4000 pcs, 4000 pcs/bulk
MOQ: 4000 pcs, 4000 pcs/bulk
PACKAGE FORM
T-1¾
T-1¾
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
Collector emitter voltage
Emitter collector voltage
Collector current
Collector peak current
Power dissipation
Junction temperature
Operating temperature range
Storage temperature range
Soldering temperature
Thermal resistance junction/ambient
tp/T ≤ 0.5, tp ≤ 10 ms
Tamb ≤ 47 °C
t≤3s
Connected with Cu wire, 0.14 mm2
VCEO
VECO
IC
ICM
PV
Tj
Tamb
Tstg
Tsd
RthJA
VALUE
70
5
50
100
150
100
- 40 to + 100
- 40 to + 100
260
350
UNIT
V
V
mA
mA
mW
°C
°C
°C
°C
K/W
Rev. 1.8, 23-Aug-11
1 Document Number: 81532
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
1 page  
www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
1 Document Number: 91000
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet BPW96B.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| BPW96 | Silicon NPN Phototransistor | Vishay Telefunken |
| BPW96A | Silicon NPN Phototransistor | Vishay Telefunken |
| BPW96B | Silicon NPN Phototransistor | Vishay Telefunken |
| BPW96C | Silicon NPN Phototransistor | Vishay Telefunken |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |