Datasheet.kr   

AD1403 데이터시트 PDF




Analog Devices에서 제조한 전자 부품 AD1403은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 AD1403 자료 제공

부품번호 AD1403 기능
기능 Low Cost/ Precision 2.5 V IC References
제조업체 Analog Devices
로고 Analog Devices 로고


AD1403 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 4 페이지수

미리보기를 사용할 수 없습니다

AD1403 데이터시트, 핀배열, 회로
a
FEATURES
Improved, Lower Cost, Replacements for Standard
1403, 1403A
3-Terminal Device: Voltage In/Voltage Out
Laser Trimmed to High Accuracy: 2.500 V ؎ 10 mV
(AD1403A)
Excellent Temperature Stability: 25 ppm/؇C (AD1403A)
Low Quiescent Current: 1.5 mA max
10 mA Current Output Capability
Low Cost
Convenient Mini-DIP Package
Low Cost, Precision
2.5 V IC References
AD1403/AD1403A*
FUNCTIONAL BLOCK DIAGRAM
PRODUCT DESCRIPTION
The AD1403 and AD1403A are improved three-terminal, low
cost, temperature compensated, bandgap voltage references that
provide a fixed 2.5 V output voltage for inputs between 4.5 V
and 40 V. A unique combination of advanced circuit design and
laser-wafer-trimmed thin-film resistors provides the AD1403/
AD1403A with an initial tolerance of ± 10 mV and a tempera-
ture stability of better than 25 ppm/°C. In addition, the low
quiescent current drain of 1.5 mA (max) offers a clear advan-
tage over classical Zener techniques.
The AD1403 or AD1403A is recommended as a stable refer-
ence for all 8-, 10- and 12-bit D-to-A converters that require an
external reference. In addition, the wide input range of the
AD1403/AD1403A allows operation with 5 volt logic supplies,
making these devices ideal for digital panel meter applications
and when only a single logic supply is available.
The AD1403 and AD1403A are specified for operation over the
0°C to +70°C temperature range. The AD580 series of 2.5 volt
precision IC references is recommended for applications where
operation over the –55°C to +125°C range is required.
PRODUCT HIGHLIGHTS
1. The AD1403A offers improved initial tolerance over the in-
dustry-standard 1403A: ± 10 mV versus ± 25 mV at a lower
cost.
2. The three-terminal voltage in/voltage out operation of the
AD1403/AD1403A provides a regulated output voltage with-
out any external components.
3. The AD1403/AD1403A provides a stable 2.5 V output volt-
age for input voltages between 4.5 V and 40 V making these
devices ideal for systems that contain a single logic supply.
4. Thin film resistor technology and tightly controlled bipolar
processing provide the AD1403A with temperature stabilities
of 25 ppm/°C.
5. The low 1.5 mA maximum quiescent current drain of the
AD1403 and AD1403A makes them ideal for CMOS and
other low power applications.
*Protected by U.S. Patent Numbers: 3,887,863, RE30,586.
REV. A
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 617/329-4700
Fax: 617/326-8703




AD1403 pdf, 반도체, 판매, 대치품
ApDp1l4yi0n3g/AthDe14A0D31A403/AD1403A
The AD1403 exhibits a worst-case shift of 7.5 mV over the en-
tire range of operating input voltage, 4.5 volts to 40 volts. Typi-
cally, the shift is less than 1 mV as shown in Figure 3.
THE AD1403A AS A LOW POWER, LOW VOLTAGE
PRECISION REFERENCE FOR DATA CONVERTERS
The AD1403A has a number of features that make it ideally
suited for use with A/D and D/A data converters used in com-
plex microprocessor-based systems. The calibrated 2.500 volt
output minimizes user trim requirements and allows operation
from a single low voltage supply. Low power consumption
(1.5 mA quiescent current) is commensurate with that of CMOS-
type devices, while the low cost and small package complements
the decreasing cost and size of the latest converters.
Figure 8 shows the AD1403A used as a reference for the
AD7524 low-cost 8-bit CMOS DAC with complete micro-
Figure 9a shows the AD1403 connected as a current source.
Total current is equal to the quiescent current plus the load
current. Most of the temperature coefficient comes from the
quiescent current term II, which has a typical TC of 0.13%/°C
(1300 ppm/°C). The load voltage (and hence current) TC is
much lower at ± 40 ppm/°C max (AD1403). Therefore, the
overall temperature coefficient decreases rapidly as the load cur-
rent is increased. Figure 9b shows the typical temperature coef-
ficient for currents between 1.5 mA and 10 mA. Use of an
AD1403A will not improve the TC appreciably.
Figure 9a. The AD1403 as a Precision Programmable
Current Source
Figure 8. Low Power, Low Voltage Reference for the
AD7524 Microprocessor-Compatible 8-Bit DAC
processor interface. The AD1403A and the AD7524 are speci-
fied to operate from a single 5 volt supply; this eliminates the
need to provide a +15 volt power supply for the sole purpose of
operating a reference. The AD7524 includes an 8-bit data regis-
ter, and address decoding logic; it may thus be interfaced di-
rectly to an 8- or 16-bit data bus. Only 300 µA of quiescent
current from the single +5 volt supply is required to operate the
AD7524 which is packaged in a small 16-pin DIP. The AD542
output amplifier is also low power, requiring only 1.5 mA quies-
cent current. Its laser-trimmed offset voltage preserves the ± 1/2
LSB linearity of the AD7524KN without user trims and it typi-
cally settles to ± 1/2 LSB in less than 5 microseconds. It will pro-
vide the 0 volt to –2.5 volt output swing from ± 5 volt supplies.
Figure 9b. Typical Temperature Coefficient of Current
Source
OUTLINE DIMENSIONS
Dimensions shown in inches and (mm).
8-Pin Mini-DIP (N)
THE AD1403 AS A PRECISION PROGRAMMABLE
CURRENT SOURCE
The AD1403 is an excellent building block for precision current
sources. Its wide range of operating voltages, 4.5 V to 40 V,
along with excellent line regulation over that range (7.5 mV)
result in high insensitivity to varying load impedances. The low
quiescent current (II) of 1.5 mA (max) and the maximum speci-
fied maximum load current of 10 mA allows the user to pro-
gram current to any value between 1.5 mA and 10 mA.
–4–
REV. A

4페이지












구       성 총 4 페이지수
다운로드[ AD1403.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
AD1403

Low Cost/ Precision 2.5 V IC References

Analog Devices
Analog Devices
AD1403A

Low Cost/ Precision 2.5 V IC References

Analog Devices
Analog Devices

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵