Datasheet.kr   

AA022N1-65 PDF 데이터시트 : 부품 기능 및 핀배열

부품번호 AA022N1-65
기능 20-24 GHz Low Noise Amplifier
제조업체 Alpha Industries
로고 Alpha Industries 로고 



전체 4 페이지

		

No Preview Available !

AA022N1-65 데이터시트, 핀배열, 회로
20–24 GHz Low Noise Amplifier
Features
I 3.2 dB Noise Figure
I 17 dB Gain
I +9 dBm Output Power
I Hermetic Package with Solderable Leads
I Single Voltage Operation
I 100% RF and DC Testing
Description
The AA022N1-65 is a broadband millimeterwave amplifier
in a hermetic package. The amplifier is designed for use
in millimeterwave communication and sensor systems as
the receiver front-end, transmitter gain stage, or local
oscillator gain stage when high gain, wide dynamic range,
and low noise figure are required. The solder-sealed
hermetic package provides excellent electrical
performance, excellent thermal performance, and
complete environmental protection for long-term reliability.
A single supply voltage simplifies bias requirements. All
amplifiers are screened at the operating frequencies prior
to shipment for guaranteed performance. The amplifier is
targeted for millimeterwave point-to-point and point-to-
multipoint wireless communications systems.
Pin Out
RF In
AA022N1-65
N/C N/C
AA022N1-65
RF In
RF Out
YYWW
VDD
RF Out
Electrical Specifications at 25°C (VD = 5.5 V)
RF
Parameter
Bandwidth
Small Signal Gain
Noise Figure
Input Return Loss
Output Return Loss
Output Power at 1 dB Gain Compression
Temperature Coefficient of Gain
DC
Drain Current
Parameter
VD
Symbol
BW
G
NF
RLI
RLO
P1 dB
dG/dT
Min.
20
15
Typ.
19–25
17
3.2
8
11
9
-0.028
Max.
24
3.9
Unit
GHz
dB
dB
dB
dB
dBm
dB/C
Symbol
ID
Min. Typ. Max. Unit
60 90 mA
Alpha Industries, Inc. [781] 935-5150 Fax [617] 824-4579 Email sales@alphaind.com www.alphaind.com
Specifications subject to change without notice. 2/00A
1




AA022N1-65 pdf, 반도체, 판매, 대치품
2024 GHz Low Noise Amplifier
AA022N1-65
Leaded Millimeterwave Package
Handling and Mounting
The leaded millimeterwave package requires careful
mounting design to maintain optimal performance.
Handling
The leaded millimeterwave package is extremely rugged.
Care should be exercised when handling with metal tools.
Only personnel trained in both ESD precautions and
handling precautions should be allowed to handle these
packages.
Package Construction
The construction of the leaded millimeterwave package
consists of a metal base and ceramic walls. The
package is topped by a solder-sealed metal lid. All metal
parts are gold-plated.
Mounting Design
The leaded millimeterwave package is mounted by placing
it in a hole cut in a printed circuit board. The bottom of the
package leads should be in the same plane as the top
surface of the printed circuit board traces. The hole should
be cut as close as possible to the outer dimensions of the
package to minimize the gap between package and
printed circuit board. The gap should be no more than
0.005" (0.127 mm). The base of the package should be
mounted directly to a surface that provides a good ground
plane for the printed circuit board and provides a good
thermal ground.
Mounting the Package
The leaded millimeterwave package should be attached
to its mounting surface using a silver-filled conductive
paste epoxy or solder. Care should be taken to ensure that
there are no voids or gaps in the epoxy or solder underfill
so that a good ground contact is maintained.
Screw hardware attachment should be used in addition
to epoxy or solder in situations where additional
mechanical integrity is desired. Care should be exercised
when tightening screws because over-tightening could
deform the package base.
Connecting the Package
Connection of the package leads to the printed circuit
board traces is accomplished with solder. Attached leads
should lie flat upon the printed circuits board traces.
Package leads can be trimmed if desired.
Soldered Leads
Minimize RF
Gap Widths
Printed Circuit Board
Rogers 4003
0.008" (0.20 mm) Thick
RF Out
RF In
080 Screw
Electrically & Thermally
Conductive Ground Plane
DC Connection
Leaded Millimeterwave Package Mounting
4 Alpha Industries, Inc. [781] 935-5150 Fax [617] 824-4579 Email sales@alphaind.com www.alphaind.com
Specifications subject to change without notice. 2/00A

4페이지













구       성총 4 페이지
다운로드[ AA022N1-65.PDF 데이터시트 ]
구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

휴대전화 : 010-3582-2743


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877, [ 홈페이지 ]



링크공유

링크 :

관련 데이터시트

부품번호상세설명 및 기능제조사
AA022N1-65

20-24 GHz Low Noise Amplifier

Alpha Industries
Alpha Industries

DataSheet.kr    |   2019   |  연락처   |  링크모음   |   검색  |   사이트맵