Datasheet.kr   

AA031P1-A2 PDF 데이터시트 : 부품 기능 및 핀배열

부품번호 AA031P1-A2
기능 28-32 GHz Surface Mount Driver Amplifier
제조업체 Alpha Industries
로고 Alpha Industries 로고 


전체 4 페이지

		

No Preview Available !

AA031P1-A2 데이터시트, 핀배열, 회로
28–32 GHz Surface Mount Driver Amplifier
Features
I Surface Mount Package
I 17 dB Typical Gain
I 16 dBm Typical P1 dB Output Power
I Single Voltage Operation
I 100% RF and DC Testing
AA031P1-A2
Patent Pending
Description
The AA031P1-A2 is a broadband millimeterwave driver
amplifier in a rugged surface mount package which is
compatible with high volume solder installation. The
amplifier is designed for use in millimeterwave
communication and sensor systems as a gain stage in the
receiver, transmitter, or LO chain when high gain and
linearity are required. The robust ceramic surface mount
package provides excellent electrical performance and a
high degree of environmental protection for long-term
reliability. A single supply voltage simplifies bias
requirements. All amplifiers are screened at the operating
frequencies prior to shipment for guaranteed
performance. Amplifier is targeted for high volume
millimeterwave applications such as satellite and wireless
point-to-point and point-to-multipoint systems.
Pin Out
N/C VD N/C
LO In
AA031P1-A2
YYWW
Orientation
Indicated by
Missing
Castellations
N/C N/C N/C
RF Out
Electrical Specifications at 25°C (VD = 5.5 V)
Parameter
Bandwidth
Small Signal Gain
Output Power at 1 dB Gain Compression
Input Return Loss
Output Return Loss
Temperature Coefficient of Gain
Drain Current
Symbol
BW
G
P1 dB
RLI
RLO
dG/dT
ID
Min.
28
14
13
Typ.
17
16
9
12
-0.03
145
Max.
32
200
Unit
GHz
dB
dBm
dB
dB
dB/C
mA
Alpha Industries, Inc. [781] 935-5150 Fax [617] 824-4579 Email sales@alphaind.com www.alphaind.com
Specifications subject to change without notice. 3/01A
1




AA031P1-A2 pdf, 반도체, 판매, 대치품
2832 GHz Surface Mount Driver Amplifier
AA031P1-A2
“Alpha Two” Surface Mount Package
Handling and Mounting
Millimeterwave components require careful mounting
design to maintain optimal performance. The Alpha Two
surface mount package (patent pending) provides a
rugged and repeatable electrical connection using
standard solder techniques.
Handling
The Alpha Two surface mount package is very rugged.
However, due to ceramics brittle nature, one should
exercise care when handling with metal tools. Do not apply
heavy pressure to the lid. Vacuum tools may be used to
pick and place this part.
Only personnel trained in both ESD precautions and
handling precautions should be allowed to handle these
packages.
Package Construction
The Alpha Two surface mount package consists of a base
and a lid. The package base is ceramic with filled vias and
plated castellations. The package lid is unplated alumina.
The lid seal is epoxy.
Mounting Design
The Alpha Two surface mount package is installed on top
of a printed circuit board on a specially designed footprint.
Mounting footprint geometry will be supplied by Alpha
Industries in electronic formats or paper drawing.
DC Connections
64 Via Holes
RF In
RF Out
DC Connections
Footprint Geometry for Alpha Two
Surface Mount Package
Mounting the Package
The Alpha Two surface mount package is compatible with
high-volume surface mount installation using solder. RF
and DC connections are accomplished with metallized
edge castellations that hold solder fillets. Ground
connections are accomplished by both metallized edge
castellations and filled vias to the bottom of the package.
Care should be taken to ensure that there are no voids
or gaps in the solder so that a good RF, DC, and ground
contact is maintained.
DC Lines
RF In
Printed Circuit Board
Rogers 4003
0.008" (0.20 mm) Thick
Solder Fillets
Electrically & Thermally
Conductive Ground Plane
Alpha Two Surface Mount Package Installation
RF Out
4 Alpha Industries, Inc. [781] 935-5150 Fax [617] 824-4579 Email sales@alphaind.com www.alphaind.com
Specifications subject to change without notice. 3/01A

4페이지













구       성총 4 페이지
다운로드[ AA031P1-A2.PDF 데이터시트 ]
구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

휴대전화 : 010-3582-2743


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877, [ 홈페이지 ]



링크공유

링크 :

관련 데이터시트

부품번호상세설명 및 기능제조사
AA031P1-A2

28-32 GHz Surface Mount Driver Amplifier

Alpha Industries
Alpha Industries

DataSheet.kr    |   2019   |  연락처   |  링크모음   |   검색  |   사이트맵