|
|
Número de pieza | AT-635TR | |
Descripción | Vo l t age Va r i a ble Absorptive Attenu a t o r/ 35 dB DC - 2 GHz | |
Fabricantes | Tyco Electronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AT-635TR (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! Voltage Variable Absorptive Attenuator, 35 dB
DC - 2 GHz
AT-635
Features
q 35 dB Voltage Variable Attenuation @ 1 GHz
q Single Voltage Control 0 to -4 Volts
q Low DC Power Consumption: 10 mW
q Nanosecond Switching Speed
q Temperature Range: -40˚C to +85˚C
q Low Cost SOIC14 Plastic Package
q Tape and Reel Packaging Available1
SO-14
V 3.00
Description
M/A-COM’s AT-635 is a GaAs MMIC voltage variable absorptive
attenuator in a low cost SOIC 14-lead surface mount plastic pack-
age. The AT-635 is ideally suited for use where attenuation fine
tuning, fast switching and very low power consumption are
required. Typical applications include radio, cellular, GPS equip-
ment and other Automatic Gain/Level Control circuits.
The AT-635 is fabricated with a monolithic GaAs MMIC using a
mature 1-micron process. The process features full chip passiva-
tion for increased performance and reliability.
Ordering Information
Part Number
Package
AT-635 PIN
SOIC 14-Lead Plastic Package
AT-635TR
Forward Tape & Reel
Electrical Specifications, TA = +25°C
Parameter
Test Conditions2
Insertion Loss
Flatness
(Peak to Peak)
DC-2 GHz
DC – 0.1 GHz
DC – 0.5 GHz
DC – 1.0 GHz
DC – 2.0 GHz
10 dB Attenuation
20 dB Attenuation
30 dB Attenuation
Unit
dB
dB
dB
dB
dB
dB
dB
VSWR
Trise, Tfall
Ton, Toff
Transients
Power
Handling
IP2
10% to 90% RF, 90% to 10% RF
50% Control to 90% RF, 50% Control to 10% RF
In Band
Linear Operation
Absolute Max Input Power
Measured Relative
to Input Power
(for two-tone input power up to +5 dBm)
0.05 GHz
0.5 – 2.0 GHz
nS
nS
mV
dBm
dBm
dBm
dBm
Measured Relative
0.05 GHz
dBm
IP3 to Input Power
0.5 – 2.0 GHz
dBm
(for two-tone input power up to +5 dBm)
1.Refer to “Tape and Reel Packaging”Section, or contact factory.
2.All measurements at 1 GHz in a 50Ω system, unless otherwise specified.The A control voltage 0 to -4 volts @ 20 µA typ.
3. For levels above 6 dB attenuation. For levels below 6 dB, the minimum specification numbers apply.
Min.
18
18.5
Typ.
6.5
6.7
7.2
7.5
+/-1.0
+/-1.2
+/-1.2
2.0:1
2
4
30
34
47
31(3)
36(3)
Max
6.7
7.0
7.4
7.8
+/-1.3
+/-1.5
+/-1.5
13
21
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet AT-635TR.PDF ] |
Número de pieza | Descripción | Fabricantes |
AT-635TR | Vo l t age Va r i a ble Absorptive Attenu a t o r/ 35 dB DC - 2 GHz | Tyco Electronics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |