|
|
|
부품번호 | AT27BV4096 기능 |
|
|
기능 | 4 Megabit 256K x 16 Unregulated Battery-Voltage High Speed OTP CMOS EPROM | ||
제조업체 | ATMEL Corporation | ||
로고 | |||
전체 9 페이지수
AT27BV4096
Features
Fast Read Access Time - 120 ns
•• Dual Voltage Range Operation
Unregulated Battery Power Supply Range, 2.7V to 3.6V
or Standard 5V ± 10% Supply Range
Pin Compatible with JEDEC Standard AT27C4096
•• Low Power CMOS Operation
20 µA max. (less than 1 µA typical) Standby for VCC = 3.6V
29 mW max. Active at 5 MHz for VCC = 3.6V
• JEDEC Standard Surface Mount Packages
44-Lead PLCC
40-Lead TSOP (10 x 14mm)
• High Reliability CMOS Technology
2,000V ESD Protection
200 mA Latchup Immunity
• Rapid™ Programming algorithm - 100 µs/word (typical)
• CMOS and TTL Compatible Inputs and Outputs
JEDEC Standard for LVTTL and LVBO
Integrated Product Identification Code
•• Commercial and Industrial Temperature Ranges
Description
The AT27BV4096 is a high performance, low power, low voltage 4,194,304 bit one-
time programmable read only memory (OTP EPROM) organized as 256K by 16 bits.
It requires only one supply in the range of 2.7V to 3.6V in normal read mode opera-
tion. The by-16 organization makes this part ideal for portable and handheld 16 and
32 bit microprocessor based systems using either regulated or unregulated battery
power.
(continued)
4 Megabit
(256K x 16)
Unregulated
Battery-Voltage™
High Speed
OTP
CMOS EPROM
Pin Configurations
Pin Name Function
A0 - A17 Addresses
O0 - O15 Outputs
CE Chip Enable
OE Output Enable
NC No Connect
Note: Both GND pins must be
connected.
AT27BV4096
PLCC Top View
TSOP Top View
Type 1
Note: 1. PLCC package pins 1 and 23
are DON’T CONNECT.
0640A
3-63
DC and AC Operating Conditions for Read Operation
Operating
Temperature (Case)
VCC Power Supply
Com.
Ind.
-12
0°C - 70°C
-40°C - 85°C
2.7V - 3.6V
5V ± 10%
AT27BV4096
DC and Operating Characteristics for Read Operation
-15
0°C - 70°C
-40°C - 85°C
2.7V - 3.6V
5V ± 10%
= Preliminary Information
Symbol Parameter
Condition
Min Max Units
VCC = 2.7V to 3.6V
ILI Input Load Current
VIN = 0V to VCC
±1 µA
ILO
IPP1 (2)
Output Leakage Current
VOUT = 0V to VCC
VPP (1) Read/Standby Current VPP = VCC
±5 µA
10 µA
ISB VCC (1) Standby Current
ISB1 (CMOS), CE = VCC ± 0.3V
ISB2 (TTL), CE = 2.0 to VCC + 0.5V
20 µA
100 µA
ICC VCC Active Current
f = 5 MHz, IOUT = 0 mA, CE = VIL, VCC = 3.6V
8 mA
VIL Input Low Voltage
VCC = 3.0 to 3.6V
VCC = 2.7 to 3.6V
-0.6 0.8 V
-0.6 0.2 x VCC V
VIH Input High Voltage
VCC = 3.0 to 3.6V
VCC = 2.7 to 3.6V
2.0 VCC + 0.5
0.7 x VCC VCC + 0.5
V
V
VOL Output Low Voltage
IOL = 2.0 mA
IOL = 100 µA
0.4 V
0.2 V
IOL = 20 µA
0.1 V
VOH Output High Voltage
IOH = -2.0 mA
IOH = -100 µA
2.4
VCC - 0.2
V
V
VCC = 4.5V to 5.5V
IOH = -20 µA
VCC - 0.1
V
ILI Input Load Current
VIN = 0V to VCC
±1 µA
ILO
IPP1 (2)
Output Leakage Current
VOUT = 0V to VCC
VPP (1) Read/Standby Current VPP = VCC
±5 µA
10 µA
ISB VCC (1) Standby Current
ISB1 (CMOS), CE = VCC ± 0.3V
ISB2 (TTL), CE = 2.0 to VCC + 0.5V
100 µA
1 mA
ICC VCC Active Current
f = 5 MHz, IOUT = 0 mA, CE = VIL
40 mA
VIL Input Low Voltage
-0.6 0.8 V
VIH Input High Voltage
2.0 VCC + 0.5 V
VOL Output Low Voltage
IOL = 2.1 mA
0.4 V
VOH Output High Voltage
IOH = -400 µA
2.4 V
Notes: 1. VCC must be applied simultaneously with or before
VPP, and removed simultaneously with or after
VPP.
2. VPP may be connected directly to VCC, except during pro-
gramming. The supply current would then be the sum of ICC
and IPP.
3-66 AT27BV4096
4페이지 Programming Waveforms (1)
AT27BV4096
Notes: 1. The Input Timing Reference is 0.8V for VIL and 2.0V
for VIH.
2. tOE and tDFP are characteristics of the device but
must be accommodated by the programmer.
3. When programming the AT27BV4096 a 0.1 µF capacitor is
required across VPP and ground to suppress spurious volt-
age transients.
DC Programming Characteristics
TA = 25 ± 5°C, VCC = 6.5 ± 0.25V, VPP = 13.0 ± 0.25V
Symbol
ILI
VIL
VIH
VOL
VOH
ICC2
IPP2
VID
Parameter
Input Load Current
Input Low Level
Input High Level
Output Low Voltage
Output High Voltage
VCC Supply Current (Program and Verify)
VPP Supply Current
A9 Product Identification Voltage
Test Conditions
VIN = VIL, VIH
IOL = 2.1 mA
IOH = -400 µA
CE = VIL
Limits
Min Max
±10
-0.6 0.8
2.0 VCC + 0.1
0.4
2.4
50
30
11.5 12.5
Units
µA
V
V
V
V
mA
mA
V
3-69
7페이지 | |||
구 성 | 총 9 페이지수 | ||
다운로드 | [ AT27BV4096.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
AT27BV4096 | 4 Megabit 256K x 16 Unregulated Battery-Voltage High Speed OTP CMOS EPROM | ATMEL Corporation |
AT27BV4096-12JC | 4 Megabit 256K x 16 Unregulated Battery-Voltage High Speed OTP CMOS EPROM | ATMEL Corporation |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |