Datasheet.kr   

AT-213PIN PDF 데이터시트 : 부품 기능 및 핀배열

부품번호 AT-213PIN
기능 Digital Attenuator/ 15 dB/ 4-Bit/ TTL Driver/ DC - 3 GHz
제조업체 Tyco Electronics
로고 Tyco Electronics 로고 



전체 3 페이지

		

No Preview Available !

AT-213PIN 데이터시트, 핀배열, 회로
Digital Attenuator, 15 dB, 4-Bit,
TTL Driver, DC - 3 GHz
V 3.00
Features
n Attenuation: 1 dB steps to 15 dB
n Temperature Stability: ± 0.18 dB from –55°C to +85°C
Typical
n Low DC Power Consumption
n Hermetic Surface Mount Package
n Integral TTL Driver
n 50 Ohms Nominal Impedance
Description
M/A-COM’s AT-213 is a 4-bit, 1 dB step digital attenuator
in a hermetically sealed ceramic 16-lead surface mount
package. The AT-213 is ideally suited for use where high
accuracy, fast switching, very low power consumption and
low intermodulation products are required. Typical
applications include dynamic range setting in a precision
receiver circuits and other gain/leveling control circuits.
Environmental screening is available. Contact the factory
for information.
CR-11
Electrical Specifications: TA = -55°C to +85°C 1
Parameter
Reference Insertion Loss
Test Conditions
Attenuation Accuracy 2
VSWR
Trise, Tfall
Ton, Toff
Transients
1 dB Compression
Input IP3
Input IP2
Vcc
Vee
Any Single Bit
Any Combination of Bits
10% to 90%
50% Control to 90/10% RF
In-Band (peak-peak)
Input Power
Input Power
For two-tone Input Power
Up to +5 dBm
For two-tone Input Power
Up to +5 dBm
Frequency
DC - 0.5 GHz
DC - 1.0 GHz
DC - 2.0 GHz
DC - 3.0 GHz
DC - 2.0 GHz
DC - 3.0 GHz
DC - 2.0 GHz
DC - 3.0 GHz
0.05 GHz
0.5 - 3.0 GHz
0.05 GHz
0.5 - 3.0 GHz
0.05 GHz
0.5 - 3.0 GHz
Units
Min
Typ
Max
dB — — 1.7
dB — — 1.9
dB — — 2.2
dB — — 2.5
± (0.15 dB +3% of atten setting in dB) dB
± (0.2 dB +3% of atten setting in dB) dB
Or ± 0.4 dB, whichever is greater
± (0.2 dB +3% of atten setting in dB) dB
± (0.2 dB +3% of atten setting in dB) dB
Or ± 0.4 dB, whichever is greater
Ratio
— 1.6:1
ns — 9 —
ns — 40 —
mV — 30 —
dBm — +22 —
dBm — +28 —
dBm — +40 —
dBm — +50 —
dBm — +45 —
dBm — +68 —
V 4.5 5.0 5.5
V -8.0 — -5.0
1. All specifications apply when operated with bias voltages of +5V for Vcc and –5.0V for Vee.
2. This attenuator is guaranteed monotonic.






구       성총 3 페이지
다운로드[ AT-213PIN.PDF 데이터시트 ]
구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

휴대전화 : 010-3582-2743


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877, [ 홈페이지 ]



링크공유

링크 :

관련 데이터시트

부품번호상세설명 및 기능제조사
AT-213PIN

Digital Attenuator/ 15 dB/ 4-Bit/ TTL Driver/ DC - 3 GHz

Tyco Electronics
Tyco Electronics

DataSheet.kr    |   2019   |  연락처   |  링크모음   |   검색  |   사이트맵