|
|
Número de pieza | AT-232PIN | |
Descripción | Digital Attenuator/ 30 dB/ 4-Bit/ DC - 2 GHz | |
Fabricantes | Tyco Electronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AT-232PIN (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
No Preview Available ! Digital Attenuator, 30 dB, 4-Bit,
DC - 2 GHz
V 3.00
Features
n Attenuation: 2 dB steps to 30 dB
n Temperature Stability: ± 0.18 dB from –55°C to +85°C
Typical
n Low DC Power Consumption
n Hermetic Surface Mount Package
n Fast Switching Speed, 12 ns Typical
n 50 Ohm Nominal Impedance
Description
M/A-COM’s AT-232 is a GaAs FET 4-bit digital attenuator
with a 2 dB minimum step size and 30 dB total attenuation.
This attenuator is in a hermetically sealed ceramic 16-lead
surface mount package. The AT-232 is ideally suited for
use where accuracy, fast switching, very low power
consumption and low intermodulation products are
required. Typical applications include dynamic range
setting in precision receiver circuits and other gain/leveling
control circuits. Environmental screening is available.
Contact the factory for information.
CR-6
Electrical Specifications1
(From –55°C to +85°C)
Parameter
Reference Insertion Loss
Attenuation Accuracy 2
VSWR
Trise, Tfall
Ton, Toff
Transients
1 dB Compression
Input IP3
Input IP2
Test Conditions
—
Any Single Bit
Any Combination of Bits
—
10% to 90%
50% Control to 90/10% RF
In-Band (peak-peak)
Input Power
Input Power
For two-tone Input Power
Up to +5 dBm
For two-tone Input Power
Up to +5 dBm
Frequency
DC - 0.5 GHz
DC - 1.0 GHz
DC - 2.0 GHz
DC - 1.0 GHz
DC - 2.0 GHz
DC - 1.0 GHz
DC - 2.0 GHz
DC - 2.0 GHz
—
—
—
0.05 GHz
0.5 - 2.0 GHz
0.05 GHz
0.5 - 2.0 GHz
0.05 GHz
0.5 - 2.0 GHz
Units
Min
Typ
Max
dB — — 2.0
dB — — 2.3
dB — — 2.5
± (0.15 dB +3% of atten setting in dB) dB
± (0.2 dB +3% of atten setting in dB) dB
Or ± 0.45 dB, whichever is greater
± (0.22 dB +3% of atten setting in dB) dB
± (0.25 dB +4% of atten setting in dB) dB
Or ± 0.45 dB, whichever is greater
Ratio
—
— 1.6:1
ns — 12 —
ns — 18 —
mV — 25 —
dBm
—
+20
—
dBm
—
+28
—
dBm
—
+40
—
dBm
—
+50
—
dBm
—
+45
—
dBm
—
+68
—
1. All specifications apply when operated with control votlages of 0.0V to -5.0V.
2. This attenuator is guaranteed monotonic.
1 page |
Páginas | Total 3 Páginas | |
PDF Descargar | [ Datasheet AT-232PIN.PDF ] |
Número de pieza | Descripción | Fabricantes |
AT-232PIN | Digital Attenuator/ 30 dB/ 4-Bit/ DC - 2 GHz | Tyco Electronics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |